About network flow control in small LANs! Those who have experience in network management! 20

There is one of the most effective solutions in our computer room. It is to pull the cord as soon as it is attacked. Do it a few more times. The customer will be very autonomous to call ** to tell you that I was attacked to pull the cord handle...

Large enterprises generally have a large network, and the network management is very fine: there are those responsible for some business system servers, those responsible for switching routes, and those responsible for network security, etc., and the situation of each enterprise is not the same, but basically it will be divided into two aspects: network and host, server, storage-related software and hardware are generally in the host, and switching, routing, firewall, load balancing, etc. are generally in the network.

Don't know you need to be strong.

To what extent it is generally believed that a router or two or more switches manage the network, for example, MAC and IP binding, traffic detection, so you can. If your router or switch is low in functionality, I guess there's probably nothing better to do. However, the average router can be managed with a good look at the router's operating manual.

Professional, generally with Meiping.

The computer room of the school is jointly created by Inner Mongolia.

First, bind the IP address of the switch to the MAC address of the computer, and then look for the network management software suitable for you from the Internet, and different needs correspond to different functions.

We use WorkWin LAN management software.

It's a bit of a big concept, isn't it? It depends on how big the network you manage. .

You need to buy a router with traffic limit settings (QoS management), then set a regular traffic, and then secretly set a larger amount of traffic for yourself and the boss.

Generally, it is controlled by a more advanced route, which is hardware, ignoring those software.

In addition, it is also possible to add all computers to domain management and use server management.

Just find a computer as a server and install a behavior restriction software. Or do acl. on the router

The root cause is a lack of control, and Siskele's network governance solution is specifically designed for this type of enterprise network to solve the problem and avoid recurrence.

If you do a good job, you can also improve the efficiency and work consciousness of employees.

Different network segments are accessible because there is a physical connection and routes are configured.

You can use the corresponding software to monitor the traffic, such as "Jusheng Network Management".

If you are not in the same network segment, you can't monitor it, because the gateway used is different, and the router is not the same.

As a result, it may only be possible to monitor on three separate networks.

You can then remotely access other computers to see how much bandwidth is being used on that computer's network.

You can use special intranet security management software, and the traffic management in the network monitoring system in the etims intranet security management platform can add hosts from different network segments together and manage the terminal through the server. In addition, it can limit uplink and downstream traffic, bandwidth, etc., and can configure different network bandwidth and traffic according to network requirements.

It has a good management role in IT asset management, data confidentiality, online behavior, network identity authentication and authorization, etc., and is a good management tool for enterprise CIOs.

Use dual network cards outside the server, one connected to the external network and one connected to the hub, if it is the best exchange, then do ICS, and then find a software you can manage.

If the external network is directly on the hub, you can install various management software on the server, but it is very easy to crack and very passive.

If you need to access the Internet through the server, you must add dual network cards on the server, one is used to manage the local area network, one is used to manage the external network, and the other computers are connected to the network through the hub and then connected to the network through the server network card.

Why do you have to use a hub? The performance is too poor, change to a switch, ** there is not much difference.

The Authority's Intranet requires a very comprehensive knowledge of the system and network! According to the situation of your unit, you must at least learn WindowsServer and CCNA, which can be self-taught, read textbooks by yourself or find some better technical forums on the Internet, or you can sign up for a class in your spare time to recharge, and if you have a teacher, you still have to learn faster.

If you defend against ARP attacks, you need to make a fuss from the device. Change the route to an advanced point. QoS functionality should be required.

Since the landlord doesn't understand, it's difficult to learn in a short period of time, so it's better to give up this offer.

Of course, I learned about the Internet and LAN.

Are you referring to the management of the lack of network in the shed? Find a computer with unlimited access to the Internet**, and access the Internet through that Sencao computer! Or most directly, ask the network administrator for a meal and ask him to give you the following permissions.

Niu B coaxed people, rent a cloud host on Jinshan Cloud, (the connection to the cloud host should not be blocked, if it is blocked, it will be too disgusting to this shirt), let the queen do as you like, under the hair! The pieces are fine.