How to change the bottom with PS? How to use PS to change the bottom of the ID photo

1.Select - Color range - Use the eyedropper to select the blue part - Replace the foreground color with red - Alt+Delete to fill in the foreground color - Ctrl+D to deselect.

2.If the color is a large solid color, just click on the magic wand directly, and fill the color with red as above after selection.

The simplest ones are these two. Hope you're ok.

Select the area with the magic wand, delete it, and then fill it in with the color you want.

You can also use "Ctrl+U" to bring up "Hue Saturation", select "Blue" for "Channel", and then adjust the hue and saturation, and change the color to whatever color you want.

This depends on **, if the background is a solid color, or it is very complicated, if it is a solid color background, you may use.

Magic wand tool. Or yes.

Pen tool. If it's a complex background, generally use the Pen Tool or combine channels at the same time.

Masks. to deal with it. Hope it helps.

Mobile phone installation one-inch ID photo production can be taken directly,

Tool: PSCS6 version.

<>3. Press the Shift-F5 key on the keyboard shortcut to open the fill panel, and change the content of the first row to color.

4. Select the color picker you want to fill, take red as an example, use the eyedropper to select the red in the upper right corner, and click OK in the upper right corner to complete the selection.

5. Finally, the background changes from blue to red, so that the background color of the ID photo is successful.

Use PS to change the background color of the ID photo.

In Photoshop, use the channel to change the background of a photo with a document as follows:

1.Open PS, Import**.

2.Go to the Channels panel and select the channel with a large contrast to copy.

Inverted image. Levels adjust the image to make the area you want to keep pure white and the area you want to remove to pure black.

5.Press the Ctrl key to click on the thumbnail of the copy layer to change the selection and return to the RGB layer.

6.Duplicate the selection area Ctrl+J.

7.Create a new layer, fill it with the desired color, and adjust the order of the layers.

In life, ID photos with different background colors are often used, and Photoshop software is very powerful, and you can easily change the background of ID photos.

The way to change the background of the ID photo with PhotoshopCC2014 software is as follows:

1. Open the PS software, open the ** you want to change the background color, copy the layer, and close the small eye in front of the background layer;

2. Open the "Magic Eraser Tool", set the "Tolerance", and put a small tick in front of "Continuous";

3. Use the "Magic Eraser Tool" to click on the ** background to erase the background color;

4. Open the small eye in front of the "background layer", "-Fill", and fill it with the desired color;

5. Select "Copy Layer", create a new "Layer Mask", use the black brush tool, soft edge round brush, adjust the "flow", and paint around the character;

6. "File --Save as" jpg format**, done.

1. Select the PS toolbar to quickly select the tool Magic Wand tool to cut out the character, 2. Change the background color, delete can modify the background color with one click, or select the fill to choose the color you want.

If you don't know how to use PS, you can shoot with the A app called "ID Photo Research Institute".

You don't have to use PS to change the background color of the ID photo, and you can also change it on your mobile phone.

For example, if you change the background color of your ID camera, you can change the background color of your ID photo directly on your mobile phone.

After installing the [Smart ID Camera] on your mobile phone, open it, select the type of ID photo and upload the ID photo you have taken, and select the color you need to change in the background color to complete the modification.

After the preview is satisfied, save the changed ID photo in the album, and if you need to wash it out, go directly to the photo studio and ask them to help wash it.

You can use the magic wand to select and clear it, or use the background color eraser to get rid of it. Just set the tolerances.

There's another good way to have marks on the edges. After the magic wand is selected, the selection is expanded by 2 pixels, and the selection is feathered by 1 pixel. Then deleteGive it a try.

If the background color is the same, you don't need a channel, just erase it with a magic eraser.

You take a picture and I'll tell you hehe.

P.S. How do I cut out a picture to another picture? Now in the post-processing of **, cutout is also a science. Sometimes, we need part of the content in a **, and we have to find a way to cut out the characters or items in it.

If you are using PS, how can PS cut out another image? Let's share a trick and teach you a few steps to learn how to cut out pictures. Click here for free** on PC - >>AI intelligent cutout, 3 seconds to produce the image

Method 1:AI intelligent batch cutout software

1. Click the link above to directly obtain the green official genuine software, run the software to install it locally, and start the software; Enter the main interface of the software to see a number of functions, according to our image to choose the corresponding functions, such as portrait cutout, item cutout, stamp cutout and other scenes;

2. The software supports two modes of single addition or batch addition, after the addition is completed, AI intelligently identifies the edge area, directly deducts the background that needs to be processed, and retains the details and distinct roots of the hair;

3. The right side of the drawing area supports functions such as changing the background, changing the background color, and modifying the **size, etc., we can adjust it according to our own needs, and click the save button in the lower right corner after the processing is completed, and save it directly.

Method 2: Microsoft Office Word

1. Open Word, click [Insert] [**], and add the Lu Na** you need to change the background color; Check**, click [Format] [Remove Background], and you can manually delete the background color you need to replace;

2. In the [Formatting] window, select [Solid Color Fill], and then select the background color that needs to be changed.

Method 3: Adobe Photoshop (for users with PS skills).

1. Open PS, add the ** that needs to change the background color, click [Magic Wand Tool] [Background] to delete the original background color; Pin bump.

2. Then click [Paint Bucket], select the foreground color, change the color to the background color you need, and then save**.

The above is to share with you three simple cutout tutorials, you can choose the corresponding solution according to your own needs, I hope the shared method can help the little partners in need

1. First of all, open the Photoshop software on the computer, there are two rows of toolbars at the top and left, first we click on the [Open] under the [File] in the upper left corner, and insert the ** we want to operate.

2. After successfully inserting **, find the [Oil Boy Royal File Paint Bucket] logo in the left toolbar, which is generally under the same item as the [Gradient Tool].

3. Then we find two boxes in the lower left corner of the icon, double-click the upper icon, then a dialog box will pop up, let us choose the color we want to change, click [OK]. Dismantling contains.

4. At this time, we will put the mouse in any position of the **background, and click it.

5. Now the background will become blue, repeat the above operation, and you can change the background color at will.

3. Click on the background of the ID photo with the magic wand to select, if the background color cannot be taken out at one time, hold down the shift key to select the unselected area again until the background color is all selected.

7. At this point, the basic background color of the ID photo has been replaced, if the selected tolerance value fails to include all the background, or the background has some pixels failed to be selected due to light and other problems, you can click the toolbar magnification tool to enlarge **Enlargement, and then use the magic wand tool to select the enlarged pixels, and use the del key to delete (at this time adjust the background color to the required background color) different pixels for further processing**.

Software used: PS CC

The steps to change the background color of the ID photo by photoshop replacement are as follows:

2. Use the magic wand pen channel to cut out the avatar on the **;

3. After the cutout is completed, press delete to delete the content of the selection;

4. Ctrl+D clears the selection, creates a new layer, fills in the background color of the ID photo, and adjusts the order of the layers.

5. "File --Save as" png format**, done.

On the home page, select Change Background Color.

For example, choose a red background. When you're done, click Save.

In Photoshop, turn on the bottom change method, copy the layer, and turn off the background layer; Use lasso and other tools to cut out the characters in **, reverse selection - clear; Open the background layer, fill it with the desired color, and you're good to go!

Use the Selection tool to select the area that needs to be changed to the desired color.

Cut out the image first, then add the background color.