1 How much oil do you need to add in 4T

Quickly add the engine oil.

The 4S staff said that the car should be filled with oil, but this should be the value of the new car leaving the factory, if it is not a new car, it will be because the old oil in the engine cannot be completely released. So it's definitely going to be more. Depending on how clean the old engine oil is, it should be refueled.

Engine oil, that is, engine lubricating oil, is known as the "blood" of the car, which can lubricate, clean, cool, seal, reduce wear, prevent rust and corrosion of the engine. The engine is the heart of the car, and there are many metal surfaces in the engine that rub against each other, and these parts move fast, the environment is poor, and the operating temperature can reach 400°C to 600°C. Under such harsh working conditions, only qualified lubricating oil can reduce the wear of engine parts and prolong the service life.

Engine oil, that is, engine lubricant English name: engine oil. The density is about to be able to lubricate and reduce friction, cool and cool down the engine, seal and leak proof, prevent rust and corrosion, and absorb shock and cushion.

The engine oil on the market can be divided into two types: mineral oil and synthetic oil due to its different base oils (vegetable oil is not counted due to the scarcity of production). Synthetic oil is divided into: fully synthetic and semi-synthetic.

Fully synthetic motor oil is of the highest grade.

Engine oil is made up of two parts: base oil and additives. Base oil is the main component of lubricating oil, which determines the basic properties of lubricating oil, and additives can make up for and improve the shortcomings of base oil performance, give some new properties, and are an important part of lubricating oil.

Lubricating oil base oils are mainly divided into two categories: mineral base oils and synthetic base oils. Mineral base oils are used in a wide range of applications in large quantities (about 95% or more), but some applications require the use of synthetic base stock blends.

Check the most accurate when the car is cold in the morning, as long as it is at the top of the pockmark, it is normal to exceed the bend where it is normal, and the bending part is more, and it must be released otherwise it will damage the three-way catalytic converter.

1. Gasoline.

Second, engine oil. Generally speaking, oil consumption is not severe enough to survive the cycle between maintenances, but in the summer due to the hot weather, oil consumption will be a little higher than usual. If it is found that there are impurities or gasoline smell in the engine oil during the daily inspection, and the exhaust smoke is light blue, it means that there is a problem with the engine, and the parts may be abnormally worn, so you should enter the factory for maintenance as soon as possible.

3. Transmission oil.

When you change your engine oil, you can check your transmission oil by the way, and since the inspection process is more cumbersome, you can ask the dealer's service department to handle it. In order to measure accurately, the car must be discharged into neutral p, run at idle speed, and parked on a flat place, and the oil must run to an operating temperature of 80 93.

Too much or too little oil can damage the gearbox, and too much oil may cause excessive resistance to the operation of the parts, or cause the transmission oil to bubble and deteriorate, resulting in abnormal wear and tear of the parts. So when you check your transmission fluid, it's important to measure accurately.

Fourth, the power direction oil.

When the engine cools down, wipe the top of the oil filler cap and the oil reservoir clean, then unscrew out the direction oil cap, and wipe the dipstick clean with a fiber-free clean paper towel, and then install the lock, and then open and pull out the oil level to check the dipstick.

To fill or change the oil, it is necessary to use the correct power steering oil, if it is not used properly, it will cause damage to the steering machine.

5. Brake fluid.

Just open the hood and look at the level of the brake oil can, as long as it is not lower than the lower limit.

Fully synthetic motor oil.

The turbocharged engine is more harsh in the working environment than the naturally aspirated, so the requirements for lubricating oil are higher, and under normal circumstances, it is required to use 5W-40 fully synthetic engine oil. As for the brand, it is recommended to choose the three largest motor oil brands on the market.

Oil Label:For example, in "15W W-40", "W" means Winter, and the higher the number in front of it, the better the low temperature fluidity of the engine oil, the lower the ambient temperature that can be used, and the better the protection ability of the engine during cold start, such as 5W represents the external low temperature resistance of -30 °C, and the low temperature resistance of 20W is -15 °C.

The number after w represents the kinematic viscosity of the oil at 100, and the higher the value, the higher the viscosity. 40 represents 100 degrees Celsius, and the kinematic viscosity standard is between to, which is definitely not what some people say can be used below 40.

The above content refers to Encyclopedia - Engine Oil Labeling.

Summary. Different types of engine oil should not be mixed, because the mixing of different types of engine oil will cause damage to the engine of the vehicle. Because the mixed oil will react inside the engine to produce sediment, reducing the lubrication effect of the oil, the inside of the engine will produce sludge, resulting in blockage, and the engine will not work smoothly.

The oil can be added up to 1+8+t engine.

Hello dear, the oil can be added to 1+8+T engine, no, oh dear.

Do not disturb the hands of the same type of engine oil can not be mixed, because the mixing of different types of engine oil will cause damage to the engine of the vehicle. Because the mixed engine oil will react inside the engine to produce sediment, reducing the lubrication effect of the engine oil, the inside of the engine will produce sludge, resulting in blockage, and the engine will not work smoothly.

Every time you add oil, you only need to add it between the highest and lowest scale of the dipstick, preferably not lower than the middle. Since the engine temperature rises during high-speed driving, the oil will become slightly thinner, if the amount of oil added is too small, it may cause the lubrication effect to decrease, and there is no problem with a little more in the middle, but it should not exceed the maximum scale of the refueling dipstick.

The hazards of adding too much oil are as follows:

1. When the oil is added, it will cause the amount of oil entering the combustion chamber to rise, which will increase the amount of carbon in the combustion chamber, resulting in more piston movement resistance, and ultimately causing the engine power to decrease.

2. Fuel consumption rises, when the amount of oil in the engine block is too much, it will lead to a lot of unnecessary resistance during the rotation of the curvature hidden macro shaft, resulting in the power output being affected and the fuel consumption rising.

3. Oil leakage, when the oil volume increases, it will lead to a decrease in the life of the oil seal, resulting in engine oil leakage.

The displacement belongs to the type of small car, if you want to add oil, it is best to look at the car maintenance manual that comes with the 4S store when you buy the car. Generally, the oil added to small cars is about 4L, as long as the oil scale is between the lowest and the highest.

FAW-Volkswagen Magotan cars need to add oil liters.

Volkswagen Magotan car oil slightly lower than the scale on the dipstick is the best amount of oil filling, oil is very important for the engine of the car, oil plays two major roles in lubrication and engine heat dissipation, for the engine can not lack the amount of oil, but if the excessive amount of oil is added the consequences are not good.

If the car is parked for a long time, the performance of the oil will change (emulsify) over time, so the owner still needs to pay attention to the quality of the oil in time to maintain or replace it to avoid the deterioration of the car's oil.

It is advisable to consult the required amount of engine oil when buying your vehicle barrel. Then don't pour the oil into the engine at one time, it's best to measure while adding: pull out the oil gauge that comes with the car (on the side of the engine), wipe the attached oil with a cloth, reinsert and pull it out, and check the oil traces at the position of the scale marking:

The oil level is between the upper and lower limit points, and the maximum is not more than the upper limit, which is your car oil level. Too much oil is not a good thing, if you exceed the upper limit too much, as the engine heats up during the car, the oil seal will be squeezed and the oil will leak. It reduces the impact on engine lubrication and cooling.