Why does solid wood furniture crack and how to repair it?

There are many reasons for the cracking of solid wood furniture, and the collision during handling may cause cracking; After the wood is made into a finished product, it is packed into a box without being completely air-dried, and the customer encounters high temperature air after disassembly, and it is easy to crack after drying.

When the user uses it, if the furniture is placed in a position that the sun can always reach, the furniture may crack in a short time; Solid wood furniture will crack naturally after a long time.

Solid wood furniture can be repaired after cracking, but ordinary users do not have tools and professional technology, so simple repair cannot achieve the desired effect.

Nowadays, many furniture stores are in contact with furniture beauticians, and these beauticians are to do after-sales service for users' furniture. They are very professional and the results are excellent! The process is also cumbersome, first you have to sand, then you have to fill the putty, and finally you have to paint!

It takes about half an hour to repair a small area, which is laborious and laborious, so the cost of repairing solid wood furniture is also very high!

There was a small crack one meter long in the bedroom door of my house, and it took an hour to repair it, and the cost was 200. Because I'm a regular customer of the furniture store, I ended up with a discount of 130 and they said that this ** was already quite low. Because the repair effect is very good, almost exactly the same as the original, so it is worth paying 130!

There are many reasons for the cracking of solid wood furniture in our lives, but if you master some skills, such a thing will not happen.

When we buy back solid wood furniture, the location is very important, and it must not be placed in a very dry place, so that the solid wood furniture can not be well utilized, and it will be easy to deform.

Real solid wood furniture will be affected by the environment, and there are many reasons, the most serious is the state of dry cracking of furniture.

The temperature difference between the south and the north is different, so the furniture will also have different phenomena, the temperature in the south is more humid, which has a good protective effect on the solid wood home, and will not cause cracks in the furniture because the temperature is very humid.

The environment in the north is different, the indoor is relatively dry, especially in winter, when heating, the indoor temperature can not be well circulated, and the temperature rises in a straight line, so that solid wood furniture will crack in such an environment.

We all know that when the wood itself is dry, it will have a cracked state, which is the difference between the temperature difference between the south and the north.

When we really want to remedy the remedy, we must choose a shady place to put solid wood furniture, and this phenomenon will not happen.

In winter, when the room is dry, you can choose some humidifiers to keep the room humid.

The method of furniture repair is very simple, there are many putty on the market to repair furniture, and then buy some paint of the same color as furniture paint, and put a little paint on it when adjusting the putty, it will make the color of the putty the same as the paint, so that the putty can be repaired to the cracked place, and it can be well improved.

Cracking is normal for solid wood furniture to occur because it is a manufacturing process that causes even too much dryness to cause it to crack. If you want to repair, it is recommended to find a professional to repair it, otherwise it is easy to cause more cracking.

Summary. Dear, hello, I am happy to answer for you: will the cracks of solid wood furniture crack again after repair?

Kiss, hello, dear, is not going to continue to crack, solid wood furniture cracking is generally a normal phenomenon, in the process of solid wood furniture slowly shrinking there will generally be a little cracking, repaired places will not be cracked, but other places for a long time can not guarantee that there will be cracking. Solid wood furniture is currently a relatively high-end furniture in the furniture, it can also be said to be a more environmentally friendly furniture, solid wood furniture refers to pure solid wood furniture, that is, all materials are natural materials that have not been reprocessed, do not use any wood-based panels made of furniture, in modern times popular with consumers, thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy! <>

Hello. Dear, you are good potato Kai, I am happy to answer for you: will the solid wood furniture crack after the repair will crack again Answer:

Dear, hello, dear, is not going to continue to crack, solid wood furniture cracking is generally a normal phenomenon, in the process of solid wood furniture slowly shrinking dust is generally a little cracking, repaired places will not appear cracking, but other places for a long time can not guarantee that there will be cracking. Solid wood furniture is currently a relatively high-end furniture in the furniture, it can also be said that Paishouchun is a more environmentally friendly furniture, solid wood furniture refers to pure solid wood furniture, that is, all materials are natural materials that have not been reprocessed, and do not use any wood-based panels made of furniture, which is welcomed by consumers in modern times, thank you for your patience. The above is my full reply, if you are satisfied with my service, please give a thumbs up, and I wish you all the best!

Peace and joy! <>

What is the reason for this? Will it not be made of solid wood.

Kiss, it may be that the air is too dry, and the cracking of solid wood furniture is generally a normal phenomenon, so you don't have to worry about not being solid wood.

The dining table I sent you a picture to show you is open on the surface, as if it is not open inside.

Kiss, don't worry about this is all normal, it's fine after repair.

Can it be completely fixed as before? Listen to them say that only the compressed plate will crack. Solid wood won't open.

Pro, after the repair is basically the same, the cracking of solid wood furniture is generally a normal phenomenon, and in the process of slow shrinkage of solid wood furniture, there will generally be a caller point and limb cracking.

Then my other shellfish will not open the worm mu bent for the only this dining table will open, I bought it last year, the year is boring at the beginning of the weather is still good, this Mid-Autumn Festival came back to see the cracking.

Kissing, there may be a big difference between the place where the table is made and the humidity of the place where it is used or the spring of the hall; The humidity of the factory or the place where the furniture is used is high, and the furniture will be deformed due to moisture and cracking.

First, use a small tip to crack into several smaller cracks along both sides of the crack, the smaller the better, so that the original large crack will become smaller, and finally the large crack and the small crack are basically the same, not so obvious. The wood molecules around the large cracks are again evenly aligned, becoming softer and more natural, resulting in the formation of many tiny small cracks. Fill in all the small cracks with cuticular saw foam and gently sand with sandpaper to make them fill more fully and evenly.

Extended information: The wiping of solid wood furniture is also special.

When wiping, use a soft cotton cloth. The cotton cloth can be slightly damp, but not damp, so that the water cannot be squeezed out. Wipe along the wood grain.

Avoid wiping with chemical solvents such as alcohol or detergents to avoid corroding the surface of the furniture. Waxing can restore the appearance of furniture that appears dull and faded after a period of use. Once the wax is completely dry, it can be polished with a soft, lint-free cloth such as faux deerskin, faux suede or flannel to make the furniture shinier.

Some solid wood or partial solid wood or furniture are warped or even cracked, and some doors are uneven and the doors are crooked.

There are two situations of deformation and cracking of solid wood furniture: the moisture content of the wood used in the furniture is inconsistent with that of Beijing, resulting in the deformation and cracking of the furniture; The indoor environment is too dry. If there is a suspicion of quality problems, relevant tests can be carried out.

If you only use the topcoat, there may be traces of white fog like the edge line of the map, so we will spray a whitening topcoat from Mohawk to solve the problem! When properly polished with polishing wire, the repaired crack is almost perfect and cannot be seen to have been repaired.

If the solid wood home in your home has cracks and cracks, you can use the methods mentioned above to help solve them. They may not be able to completely solve the cracking problem, but there are corresponding solutions for some small cracking problems, and you can use them with confidence. If the cracking of solid wood furniture is very serious and affects the stability in daily life, it is recommended to replace it in time and not repair it.

In this way, several tiny small cracks are formed. Secondly, fill all the small cracks with cuticle sawfoam and gently sand with sandpaper to make the filling more thorough and even. This kind of repair is more aesthetically pleasing and natural than filling the large cracks with sawdust powder.

Again, pour 502 glue, smooth it with a shovel, fix the background color appropriately, draw the wood grain, and then appropriately point 502 glue, trowel, polish it with sandpaper, and process it flat.

The cracking repair method of solid wood furniture is as follows: prepare some waste newspaper containers, scissors, clear water, alum, pigment pens, etc., cut the waste newspaper into crumbs with scissors, add an appropriate amount of alum to the crumbs, stir evenly, and then mix and pour it into the container, add water, stir again and place the container on the open flame, this process should be constantly stirred, and then fill the paste into the cracks of the solid wood furniture, let it dry naturally, and finally use a pigment pen to paint the color on the solid wood furniture, and try to coordinate the color.

When we are repairing, we prepare some waste newspapers, then cut the newspapers into paper scraps, add appropriate alum to these and stir well, then pour it into the container and add some water to stir again, put the container on the fire and bake it into a paste, in the process of baking, we must keep stirring, and then pour the paste into the cracks, let it dry naturally, and then use a paint pen to make up the color, so that it is repaired.

It can be repaired by professional repair, or in the middle of the crack, some repair powder can be smeared, and glued together, and then the surface can be smoothed.

Cracking of solid wood furniture is a common problem, some small cracks can be repaired by themselves, if the situation is more serious, you need to ask a professional to repair it. Here are a few ways to fix cracks in solid wood furniture:

If it is only a small crack, it can be repaired with paints and pigments. Mix the pigment and paint together and apply it to the crack with a clean cloth. After waiting for it to dry, apply another layer of pigment and paint, and repeat the process until the cracks are completely gone.

If the cracks in the furniture are more obvious, they can be repaired by chemical methods. Mix some white glue and pigment together to create a color that is close to the color of the wood. Apply the mixture to the cracks with a cotton tartar cloth and wait a while for the glue to dry.

Apply another layer of pigment and white glue and repeat the process until the cracks are completely gone.

If the cracks in the furniture are relatively large, but do not affect the normal use, you can use 502 glue to repair the first fu. Apply the 502 glue evenly over the cracks and wait for some time to allow the glue to dry. Then use fine sandpaper to smooth out the cracks, and finally apply a layer of transparent nail polish for a better repair effect.

The method of repairing the cracking of solid wood furniture is as follows:

1. Prepare some old newspapers and cut them into crumbs with scissors.

2. Add appropriate alum to the paper scrap and stir well.

3. Pour the mixture of paper scraps and alum into the container, then add a small amount of water and stir; Place the container on a simmer and cook until it is pasted, stirring constantly during the steaming process.

4. Fill the boiled mixture into the cracks of the solid wood furniture and let it air dry.

How to clean and maintain solid wood furniture?

1. Regularly wipe off the wax and dust on the surface with a pure cotton dry and soft cloth, and every once in a while, use a wet cotton cloth that wrung out the water to fine the dust at the corners of the furniture, and then wipe it dry with a clean dry and soft cotton cloth. In case of stains, you can use a clean rag to soak in expired milk, then wipe the wooden furniture stains, and finally wipe it again with water, which is suitable for a variety of furniture.

2. Avoid using alcohol, gasoline or other chemical solvents to remove stains. If there are stains on the surface of solid wood furniture, do not rub it vigorously, you can use warm tea to gently remove the stains, wait until the water volatilizes and apply a little light wax to the original part, and then gently rub it several times to form a protective film.

3. Keep away from heat sources. It is best to place the Wuhan decoration design furniture in a place 1 meter away from the heating Shen's flow to avoid long-term high baking, which will cause the wood to crack locally, deform and deteriorate the paint film.

In the furniture market, solid wood furniture is popular with consumers, because it has more varieties, and as long as you choose solid wood furniture with excellent quality, its environmental protection and health are more prominent. But solid wood furniture also has a disadvantage that is a headache, that is, it is prone to cracks. After all, it is solid wood, and the later maintenance is more complicated, so how to repair the cracked solid wood furniture?

1. Why do cracks appear in solid wood furniture?

Solid wood furniture is prone to cracks, mainly because of its material problems, because many of them are made of wood, and there is a drying process when making it, mainly to control its moisture content within a reasonable range. However, in the later stage, due to the different environment of use, it will lead to deformation and cracking on the surface and inside, which may be a quality problem or a normal phenomenon.

Second, how to repair the cracked solid wood furniture.

1. The surface of solid wood furniture is only slightly cracked, don't worry too much, you can use 502 glue to slowly drip into its gaps, wait until the glue is dry, and then scrape off the surface glue, of course, you can't damage the surface of the furniture, you can make the gaps not see any traces.

2. There is a relatively large gap on the surface of solid wood furniture, and it will not work with 502 glue, so it is best to ask a professional master to repair it, because the surface needs to be removed, and a series of processes such as waxing and polishing are also required.

3. For the gap is not particularly large, we can stir the alum with water into a paste, pour it into the gap, solidify, and then polish it with fine sandpaper.

3. How to maintain solid wood furniture.

1. Solid wood furniture is prone to cracking, mainly because the surrounding area is relatively humid, so we must avoid the indoor environment where it is placed too humid, and at the same time, when wiping solid wood furniture, do not use wet towels.

2. Waxing of solid wood furniture should be carried out regularly, which can effectively avoid gaps, but chemical cleaning agents cannot be used to corrode the paint when waxing, otherwise it is easy to fade and crack.

Summary: Solid wood furniture is easy to crack, but as long as we usually maintain it properly, the cracks will not exist, if there are only slight cracks, you can use some fillers for caulking, but if the cracks are relatively large, you must ask professional personnel to wax and polish.