Do I still need to add 768M physical memory?

Updated on technology 2024-04-04
9 answers
  1. Anonymous users2024-02-07

    That's not the case.

    You can open multiple experiments with the same network type as you at the same time, for example, if you use Netcom, then you open a server experiment that uses Netcom lines.

    Also, if you want to buy and sell, then naturally rely on online banking and other methods When connecting to the **server you use, the data has to be integrated and transmitted, and the database has to go through the special line, and it has to be routed in the network**, the delay is naturally large, the data traffic is large, and you naturally open the web page slower.

    There is also a way to open **When you open**, the data is larger, and you naturally can't open many web pages, so adding memory is not the way, you can consider adding bandwidth, use a good network cable, Category 6 cable, etc.

    I am connected to a PC directly on the Cisco7206 and send out a 65000 size packet Result Sending + Time to Receive Reply is 15ms If it is the default value, then there is only less than 1ms time.

    That's understandable.

  2. Anonymous users2024-02-06

    Just surfing the Internet, I don't think it's necessary to add more.

    Also, the speed of the Internet has nothing to do with increasing the memory.

  3. Anonymous users2024-02-05

    There's no need, your laptop processor is the biggest bottleneck, and secondly, the VIA graphics card doesn't perform well. For this notebook, 512 RAM is sufficient.

    Suggestion: If you can also increase the video memory, it is best to increase it to 64M, optimize the XP system, so that you can achieve the best results.

  4. Anonymous users2024-02-04

    The 16m video memory is definitely not enough to add more points.

  5. Anonymous users2024-02-03

    No, if 768 is still carded, it is recommended to change to a u, and 512 that generally does not play is absolutely enough! Maybe you don't have enough power!!

  6. Anonymous users2024-02-02

    Playing games requires a high level of computer hardware configuration, and it must be used correctly, otherwise it will not work, and it will be stuck if it can run, especially if you play large games, it will also cause a blue screen of death. Try it as described below and see if it alleviates.

    1. Check the CPU and graphics card for heat dissipation, dust removal, oiling, or replace the fan.

    Second, the power supply voltage is unstable, the power supply is insufficient, and the power supply with high quality and high power is replaced.

    3. Clean up and defragment the disk.

    1. In the window of my computer, right-click the drive letter you want to clean up - "Properties" - "Clean Disk" - check the files you want to delete - OK - Yes.

    2. Clear the temporary file, start-run-enter %temp%-OK.

    3. Clean up the registry and junk files with Optimizer or Super Bunny.

    4. Close some startup programs, start-run-msconfig---start, in addition to anti-virus software, input methods can be turned off in general.

    5. Delete unused program software.

    7. Reduce the burden of memory, do not open too many programs. If you have too many documents open or too many programs running at the same time, you will not have enough memory to run other programs, so you should close the programs and windows you don't use at any time.

    4. Upgrade the motherboard, graphics card, and network card drivers.

    5. Increase physical memory, replace it with high-quality memory, and set up virtual memory reasonably.

    1. To play games, the virtual memory can be set to be larger, the minimum value is multiple of the physical memory, and the maximum value is 2-3 times of the physical memory. No matter how big it is, it takes up too much space on your hard drive.

    2. The method of setting virtual memory is: right-click on my computer - Properties - Advanced - Performance Settings - Advanced - Virtual memory change - Select the partition where the virtual memory (page file) is stored in the drive list - Custom size - Set the value in the "Initial Size" and "Maximum", then click the "Settings" button, and finally click the "OK" button to exit.

    3. The partition where the virtual memory (page file) is stored must have enough space, and the hard disk resources are insufficient, resulting in insufficient virtual memory.

    6. Optimize your computer with Optimizer or Super Bunny.

  7. Anonymous users2024-02-01

    You're talking about setting up memory or setting up cache.

    Memory is hardware and cannot be set.

  8. Anonymous users2024-01-31

    It's time to add memory.

  9. Anonymous users2024-01-30

    Virtual memory has nothing to do with the memory (physical memory) that has been installed in your computer, virtual memory is a buffer drawn out on the hard disk by the system in order to increase your memory space, when your physical memory is insufficient, the system will automatically store the corresponding information temporarily in your virtual memory, but the speed of the computer reading virtual memory is much slower than the speed of reading physical memory, so increasing physical memory can improve the speed of your computer.

    As for the adjustment method of virtual memory, you can right-click the "My Computer" icon on the desktop, select "Properties" in the menu that appears, and then select "Advanced" in the "System Properties" window that appears, and then select the "Settings" button in the "Performance" box in this window, and click the "Change" button in the "Virtual Memory" box in the "Performance Options" dialog box that appears, you can adjust the size of your virtual memory, but I don't recommend that you change your virtual memory at will. In fact, the system will generally automatically allocate a suitable virtual memory according to the situation, if you are inexperienced, the wrong adjustment may lead to a system error, and your system will not work properly.

    Generally speaking, if you have more than 512MB of memory, you can make full use of this memory, after all, virtual memory uses hard disk storage, and the speed is far behind the memory. You can use Windows Optimizer, which has an option called --- Optimize option to make full use of memory instead of virtual memory. I hope it can help you.

    Sometimes some large programs require a lot of virtual memory, but with the help of the optimizer, you can use it with confidence.

Related questions
22 answers2024-04-04

Your memory should be 512 and 256, generally speaking, it is best to set it to a multiple of the physical memory. So you should set to: >>>More

27 answers2024-04-04

Don't think that the power of virtual memory is too great, too much is a complete waste. >>>More

4 answers2024-04-04

1024m, put it in other disks except the system disk, if your system is equipped with a c disk, then put it in the d disk.

12 answers2024-04-04

Don't care about the times.

Virtual memory: 1. Right-click [My Computer] [Properties] [Advanced] tab, 2. Click [Settings] in the [Performance] column to continue clicking the [Advanced] tab, 3. Click [Change] in the [Virtual Memory] column to pop up the [Virtual Memory] dialog box, and you can set it. >>>More

10 answers2024-04-04

This situation has also occurred on my memory card, and there are generally two reasons for this situation, one is that there is a problem when you use a card reader or a mobile phone directly connected to the computer to eject it, and hard plugging and unplugging is the most likely to occur this problem; In addition, if you take out the memory card and insert it properly, it is not inserted properly or there is an error, which can easily cause the memory card to be formatted before it can be used. >>>More