The difference between elevation erection operation and elevation installation, maintenance and demo

Work at height operation certificate.

It is a special operation certificate that must be obtained by personnel engaged in climbing and erection operations or installation, maintenance and dismantling operations at heights.

The certificate is issued by the Work Safety Supervision Bureau. Climbing and erection operation certificate: special equipment for interior and exterior decoration, cleaning, decoration, electricity, telecommunications and other line erection, high pipe erection, small air conditioning high installation, maintenance, various equipment and facilities and outdoor advertising.

Installation, overhaul, and maintenance of facilities, as well as the dismantling of buildings, equipment and facilities at heights. The following are all high-altitude operations, and they all need to obtain a high-altitude operation certificate: refers to the work that is carried out exclusively or often in the high place where the fall height datum is 2 meters or more and may fall.

Refers to engaging in scaffolding at heights.

Spanning erection or dismantling operations. Installation, maintenance and dismantling at height. It refers to the installation, maintenance, and dismantling operations at heights.

It is suitable for the use of special equipment for interior and exterior decoration, cleaning, decoration, electric power, telecommunications and other line erection, high-altitude pipeline erection, small air-conditioning high-altitude installation and maintenance, various equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance and demolition of buildings, equipment and facilities at height.

The differences are as follows: 1. The climbing operation permit refers to working on high-altitude platforms, such as scaffolding, spider plants, etc.

The aerial work certificate is a human body hanging rope to work outside.

2. The aerial work certificate is a special operation certificate that must be obtained by personnel engaged in climbing and erection operations or installation, maintenance and dismantling operations at heights.

Ascending and erection operations: including climbing erection, demolition and maintenance workers of more than 2 meters, and surface cleaning workers of high-rise buildings (structures). It refers to the work of scaffolding, spanning erection or demolition in high places.

Ascending erection operation certificate is a national labor department to ensure safety and rigid provisions to engage in this work must be aware of the common sense and operating procedures of the electrical industry, after passing the examination before issuing the certificate, engaged in ascending erection work must hold a special operation certificate for climbing and erection operations.

The certificate is applicable to the use of special equipment for the interior and exterior decoration, cleaning, decoration, electricity, telecommunications and other line erection, high-altitude pipeline erection, small air-conditioning high-altitude installation and maintenance, various equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance and high-altitude demolition of buildings, equipment and facilities.

Hello, what is the difference between climbing erection operation and installation at height? Climbing and erection operations: refers to the fibre operations of scaffolding, spanning erection or dismantling at high places; 2. Installation, maintenance and demolition of high-altitude installation, maintenance and demolition operations

It refers to the work of installation, maintenance, and dismantling at height. It is suitable for the use of special equipment for the interior and exterior decoration of buildings, cleaning (spider man for hanging operations), decoration, electricity, telecommunications and other line erection, high-altitude pipeline erection, small air-conditioning high-altitude installation and maintenance, various equipment and facilities and outdoor advertising facilities installation, overhaul, maintenance, and demolition of buildings, equipment and facilities at heights. Dear, do you have any other questions?

Summary. Hello, glad to answer for you! High-altitude erection operations can be carried out at heights.

Hello, glad to answer for you! High-altitude erection operations can be carried out at heights.

According to the provisions of the "Special Operation Catalogue", high-altitude operations mainly include climbing and erection operations and high-altitude installation, maintenance and dismantling operations. Climbing erection operation refers to the erection or dismantling of scaffolding and cross-erection at a high place. Installation, maintenance, and dismantling operations at heights refer to the installation, maintenance, and removal of objects at high places.

Summary. Ascending erection refers to an engineering and technical activity in which bearings, scaffolding, and safety measures are installed on the structure for the safe climbing of operators. Installation, maintenance and demolition at height refers to a safety measure taken when installing or dismantling the project at a high place, such as setting up fences, carpets, garbage, etc.

The installation of steel structure needs to learn whether to climb or erect or install, maintain and dismantle operations.

Ascending erection refers to an engineering and technical activity in which bearings, scaffolds and safety measures are installed on the Luyan structure for the safe climbing of operators. Installation, maintenance and demolition at height refers to the safety measures taken when installing or dismantling the project at a high place, such as setting up fences, carpets, garbage, etc.

Answer: Climbing erection and installation, maintenance and demolition at height are the differences between the content of the project. Although they are all high-altitude jobs, the work content is different. For example, the enthronement of blind elevation of communication cables or the erection of high-voltage lines are all climbing to complete the sedan car.

For installation, maintenance and demolition at height, it should be understood that there are fixed facilities at high places that need to be maintained and dismantled and updated frequently.

The installation of steel structure belongs to the installation, maintenance and dismantling operations at height. Because the steel structure installation Bikai needs to be operated at a high place, there is a risk of falling from a height, falling objects, etc., so it is necessary to take corresponding protective measures, such as wearing safety belts, using protective nets, and building safety scaffolding to ensure the safety of people and goods. At the same time, the steel structure also needs to be maintained, dismantled and other work, which also needs to be carried out at a high place, and corresponding safety protection measures need to be taken to ensure the safety of the operators.

Before working at height and erecting at height, the relevant protective facilities and personal safety protective equipment must be inspected, and no forced or forced risky operation shall be carried out in the presence of potential safety hazards. The materials used in high-altitude operations should be stacked smoothly, and should not hinder the operation, and measures to prevent falling should be formulated; The use of tools should have measures to prevent tools from falling out of their hands and injuring people; When the tools are used up, they should be put in the tool bag (sleeve). It is forbidden to throw objects up and down.

Use ladders to climb the operation, the ladder shall not be missing, shall not be used in height, if you need to connect the long bush oak, there should be reliable connection measures, and the joint shall not be more than one place. The spacing of ladder rungs should be 300mm. When using, the upper end should be fixed firmly, and the lower end should have anti-slip measures.

Without safety protection facilities, it is forbidden to walk or work on the upper chord, rock support, truss, beam of the roof truss and unfixed components. Communication devices should be set up to communicate with the ground for high-altitude operations, and special personnel should be responsible. External elevators and cages for passengers should have reliable safety protection devices.

Except for the assigned professionals, it is forbidden to climb the boom, rope or gondola accompanying the transport, and lift the object up and down.