What glue can be used to glue metal? What glue can stick to metal

1. For the bonding between small copper, iron, aluminum, stainless steel and other metal alloys processed from sheets, parts and handicrafts, JL-498 metal special fast-drying glue can be selected for fast bonding and fixing, one-component, high bonding strength, good transparency, good flexibility after curing, good waterproof, acid and alkali resistance, simple operation, only need to drop a small drop of glue on the clean and dry adhesive surface, align and compact the two adhesive surfaces, and keep it for 8-15 seconds to achieve the fixed effect, which is very suitable for continuous production line operations.

2. For the bonding between large copper, iron, aluminum, stainless steel and other metal alloys, such as the bonding between stainless steel doors and windows, furniture, pipes, plates, etc., high-strength epoxy resin AB glue should be used for bonding and fixing, such as JL-605 fast-drying AB glue cured in 5 minutes, JL-610 fast-drying AB glue cured in 10 minutes, JL-630 cured in half an hour, and AB glue cured in 1 hour, 2 hours and 4 hours. Specifically, according to the operation time of gluing and dispensing of their own production process, because the epoxy resin AB glue A and B will react and start curing after the two doses are mixed, and the curing will be completed within its operating time, so it is necessary to carefully choose the epoxy AB glue with sufficient operation time.

3. For those metal and alloy products that need to work at high temperature for a long time, it is necessary to choose epoxy AB glue that can withstand high temperature, such as JL-510 epoxy AB glue that can withstand high temperature at 200 degrees, and choose the appropriate high-temperature glue according to its working temperature.

4. For the defects, wear, scratches, corrosion and fractures of various copper, iron, aluminum, stainless steel and other metal metal castings, parts and equipment, the corresponding repair agent can be used for repair, such as JL-111 iron repair agent for iron cast iron repair, JL-112 steel repair adhesive for steel materials, JL-113 aluminum repair adhesive for aluminum products, and JL-114 copper repair adhesive for copper, which can withstand high temperature, and the color after repair is basically the same as that of the substrate.

Note: 1. Some metal surfaces are too smooth, so you can blast and grind the metal surface first to enhance the bonding effect;

2. Choose green and pollution-free adhesive products.

Metal can be glued instantaneously with HY-303 or with HY-106AB.

HY-303 instant adhesive is mainly used for the adhesive of various plastic materials such as metal, ABS, PVC, ordinary plastics, etc., such as: metal and ABS adhesive, plastic and metal adhesive, metal adhesive, wood glue, bonding between various plastics and other different materials for rapid adhesion between each other, and the adhesion is super strong.

HY-106AB glue is used for bonding and bonding glue between various metal products such as iron, aluminum, copper and other metal materials that require high temperature resistance, and requires fast adhesion between different materials of products with high requirements, and super adhesion.

Glue metal with 896 glue bonding.

The metal can be glued with YH-398 glue.

Glue for bonding metals:

Metal super glue ERGO1665 and ERGO1307 are two glues that bond metals with high strength and can replace the welding effect.

If it is some small metal parts that need to be bonded, you can also choose metal instant adhesive.

This one is simple and convenient to use.

<> strong self-spraying adhesives or hot melt adhesives are materials that can be used to bond metals. The operation of strong self-spraying glue is relatively simple, because its water resistance, heat resistance, corrosion resistance are very good, and the cost is low, it is very suitable for some metal materials, the disadvantage is not environmentally friendly, the advantage of hot melt adhesive is environmental protection, and the disadvantage is that there is no self-spraying glue on the top. The specific method of use is to clean the surface of the metal first, keep the metal surface dry and dust-free, and then evenly apply the metal glue on the surface, it is necessary to apply glue on both sides, about 5 8 minutes later, wait until there is some viscosity, and then align the area that needs to be connected, paste it together, and compact it for two hours, and wait until one day later, it can reach the highest strength.