Classification of toilets, what are the classifications of toilets?

Squatting is called squatting toilet Sitting is called toilet Toilet is divided into one-piece toilet and split toilet I am a professional sanitary ceramics quality assurance personnel Give a full score Thank you.

Sitting is sitting on the toilet, also called the toilet, squatting is called squatting, it is not a category, sitting on the toilet should be divided into jet siphon, vortex siphon, ordinary siphon, straight flush, etc.

The squatting is called a squatting toilet, also called a squatting pit, and the toilet is also called a toilet.

There are many classifications of toilets: according to the drainage system, the flushing method of the toilet is divided into flush type and siphon type; According to the connection mode between the water tank and the base, it can be divided into two types: conjoined and split; According to the drainage method, the toilet is divided into horizontal row (wall row) type and bottom row (lower row) type.

Of course, these two are different.

According to the connection method of the water tank, the toilet is divided into two types: split and connected.

How to choose between conjoined and split?

Step Method.

1. There is a small slit in the middle of the split toilet, which is not easy to clean.

2. The split toilet water tank is easy to leak.

3. The one-piece toilet is more water-intensive.

4. The connection strength of the one-piece toilet is greater.

5. The one-piece toilet is more beautiful.

Siamese toilets** are higher.

There are four classification standards for toilets, that is, according to type, structure, installation method, sewage discharge method, etc.

1. Siamese & split.

According to the type of toilet, the toilet can be divided into conjoined and split, and this classification method is the most common method of classifying toilets. The one-piece toilet is a combination of the water tank and the seat body, which is simple to install and beautiful in shape; The split toilet is designed to be installed separately from the water tank and the seat, which is simple to maintain and more traditional.

2. Flush down type & siphon type.

According to the way the toilet is drained, it can be divided into flush and siphon toilets. Flush toilet is the most traditional, currently used in domestic medium and low-grade toilets, it uses the force of water to directly discharge the dirt; The siphon toilet uses the siphon action formed by the flushing water in the sewage pipe to discharge the dirt. It is quiet to use.

3. Floor-mounted & wall-mounted.

According to the installation method of the toilet, the toilet can be divided into floor-mounted and wall-hung toilets. The floor-standing toilet is a common toilet, which is directly fixed on the ground when installed; The wall-hung toilet is designed by the installation method of hanging on the wall, and the wall-hung toilet is also called a wall-mounted toilet because the water tank is hidden in the wall.

Fourth, rear row type & lower row type.

According to the way the toilet is discharged, the toilet can be divided into rear and lower toilets. The rear toilet is also called the wall row or horizontal row, this kind of toilet is mostly installed against the wall, if the sewage outlet is in the wall, the rear toilet will be suitable a little; The lower type is also called the ground type or vertical type, and its sewage outlet is on the ground.

There are various classifications of toilets.

According to the drainage system, the flushing method of the toilet is divided into flush type and siphon type. The flush type relies on the effective water volume to cover the dirt and discharge it at the fastest speed and maximum flow. This function also depends on the design of the floor pipes in your home, if there is no water seal, the flush toilet is not easy to prevent odors.

Siphoning refers to the rapid formation of a liquid height difference under atmospheric pressure, so that the liquid flows from the high water level with high pressure to the low water level with low pressure, and fills the sewage pipe to produce a siphon phenomenon until the liquid is all discharged into the air. The earlier the siphon is formed, the faster the action is formed, the less effective water is lost, and the longer the siphon lasts, the better the sewage discharge function, and the more water is saved.

According to the connection between the water tank and the base, it can be divided into two types: conjoined and split, the conjoined type is that the water tank is connected to the base, its shape is beautiful, and it is sturdy, suitable for smaller toilets. The split type is that the water tank is separated from the base, which is large in size (occupies a large space), and is not easy to lean against the wall, and is not properly installed, which is easy to cause water leakage.

There are many kinds of toilet classifications: 1. According to the flushing method: straight flush type, siphon type, siphon with direct flush type, the last one is the most advanced, the noise is small, the momentum is large, and it is also the most expensive.

2.According to the drainage method: ground row, wall type, 3, according to the structure:

Split and conjoined 4, materials: ceramic, plastic, artificial marble, artificial agate 5, water tank capacity: 9L (banned by the state), 6L, 3 6L6

According to temperature: high-temperature ceramics 1320 °, medium temperature ceramics 800 °, low temperature ceramics 600 ° 7, as well as a variety of more advanced, more intelligent toilets, infrared induction deodorization toilets.

Washdown. Siphon.

1.There are also wash-off types called straight flush type and wash-off type. The characteristics of this toilet are that the water tank is relatively small and narrow, and the fecal outlet in the toilet seat is the hole in the toilet bowl is relatively large, and the slope in the toilet is very steep.

The amount of water is generally only about 6 liters, which is relatively water-saving.

Although this kind of toilet is a bit noisy when flushing and a little scary in the middle of the night, the water tank is relatively small, the toilet seat itself is relatively small, and it takes up less space. The shape of the sewage pipe inside is a bit like a zigzag, and the curvature is not large. Due to the large aperture size, the toilet itself has less chance of being plugged.

2.Siphon type, characterized by the large and wide water tank, the toilet seat itself is also relatively wide, the slope inside is long and oblique, and the bottom of the fecal outlet is small and round. Such a toilet, in which the fecal pipe is made into an S shape, because the curvature of this S is very large After reading the anatomical diagram, it feels like a sheep intestine path, bending back and forth, so the volume of the toilet seat will become relatively large That is, the long ramp in the toilet The inside of the toilet bowl that is generally invisible is actually densely covered with curved pipes.

Look at the picture above) when the siphon toilet flushes, the toilet will accumulate a little water first, and some people will think that the toilet is blocked, and then the pipe becomes a vacuum, resulting in siphoning, and the excrement and fecal water will be sucked down. The noise is not loud when flushing, and sometimes you will hear poof, pass, pass...The sound is the sound of the air returning to the duct at the end of the siphon phenomenon. Because the siphon toilet is to rely on the amount of water to reach a certain extent to fill the fecal pipe in the entire toilet, resulting in the siphon phenomenon, to suck away the discharge, so the amount of water often to 12 liters, and later based on the principle of environmental protection, the United States forced manufacturers to adjust the toilet water volume to 6 liters, so it is a big reform for the siphon toilet.

Because the amount of water is an important factor in the quality of the siphon effect.

3.There is also a spray siphon type, which takes into account the advantages of straight punch and siphon, and is currently the most popular style. It is a place where there is a flush of water at the lower mouth, and there is suction, and the noise is not large. From the drainage method, it can be divided into: whether it is the lower row or the back row.

In daily life, it is often troublesome to use, so it is necessary to choose a product that suits you when buying for this purpose. What are the classifications of toilets? PChouse will take you to find out.

1. Divided by type.

1. Split toilet: The split toilet has a high water level, sufficient momentum, many styles, and is the most popular. The split is generally a flush type launch, and the flushing noise is large.

Because the water tank and the main body are fired separately, the yield is high. The selectivity of the split is limited by the pit spacing, if it is much smaller than the pit spacing, it is generally considered to build a wall behind the toilet to solve the problem.

2. Siamese toilet: Siamese toilet shape is more fashionable, it will be very good-looking with it, and the water may be relatively low compared to the split water tank, which is generally higher than the subscore.

The conjoined body is generally a siphon type drainage, and the flushing is silent, because its water tank is fired together with the main body, which is easy to burn out, so the yield is low.

Due to the low water level of the conjoined body, the pit spacing of the conjoined is generally short, in order to increase the flushing force. The conjoined body is not limited by the pit distance, as long as it is smaller than the pit distance of the house.

There are many advantages, it will look very stylish, and it will be very convenient to clean. Of course, there are also disadvantages, and the comparison is water-consuming.

Second, press the water method to divide.

The classification of toilets can also be divided according to the way of drainage, according to the different ways of draining, toilets can be divided into flushing toilets and siphon toilets, the most common of which is flushing toilets, both of which have relatively strong sewage capacity.

3. According to the installation method.

Toilets can be divided into floor-mounted toilets and wall-mounted toilets according to different installation methods, floor-mounted toilets are directly fixed on the ground when installing, and wall-mounted toilets, as the name suggests, are an installation method that hangs on the wall.

The official name of the toilet is the toilet, and the Xijing Miscellaneous Records says that the Han Dynasty court made "tigers" out of jade, which were held by the emperor's attendants in case the emperor was at any time. This kind of "tiger" is a special appliance called a toilet and a potty by later generations, and it is also the predecessor of the toilet.

Categorization. By type.

Siamese & split.

The choice of toilet is mainly based on the size of the bathroom space. The split toilet is more traditional, and the production is to connect the base and the second layer of the water tank with screws or laughter and sealing rings in the later stage, which occupies a large space and is easy to hide dirt at the connecting joints;

The one-piece toilet is more modern and high-end, with a beautiful body shape, rich choices, and integrated molding. But it's a bit more expensive.

According to the direction of sewage discharge.

Rear & Lower Row.

The rear row type is also called the wall row type or horizontal row type, and the shirt cover can be known the direction of its sewage discharge according to the literal meaning. When purchasing a rear toilet, it is necessary to consider that the center of the sewage outlet is off the ground.

The height of the surface, this is generally 180mm;

The lower type is also called the floor type or vertical type, as the name suggests, it refers to the toilet with the sewage outlet on the ground. The purchase of lower-row toilets should pay attention to the distance between the center point of the sewage outlet and the wall, and the distance between the sewage outlet and the wall is divided into three types: 400mm, 305mm, and 200mm. Among them, the northern market has a large demand for 400mm pit spacing products.

The southern market has a large demand for 305mm pit spacing products.

I divide it by pressing the water mode.

Flush & Siphon.

The purchase of a toilet depends on the direction of the drainage. If it is a rear flush type, you should choose a flush toilet, which uses the flush of water to directly discharge the dirt. The flush-down type sewage outlet is larger and deeper, and the dirt is directly discharged with the help of the flushing water, which has the disadvantage of large flushing sound.

If it is a lower discharge type, you should buy a siphon toilet. There are two types of siphon subdivisions, including jet siphon and vortex siphon. The principle of the siphon toilet is to form a siphon effect in the sewage pipe by flushing water to discharge the dirt, and its sewage outlet is smaller, less noisy and quieter to use.

The disadvantage is that the water consumption is large, and the storage capacity of 6 liters is generally used up at one time.

By material. Ceramic toilets are made of clay or other inorganic substances by mixing, molding, and firing at high temperatures, and the water absorption rate.

Artificial marble toilets are processed from unsaturated polyvinegar, aluminum hydroxide, etc. as the main raw materials.

Artificial agate, with unsaturated polyvinegar, calcium carbonate and other main raw materials.

Special plastic toilet is the abbreviation of special plastic alloy material, which is a new material with high performance, functionalization and specialization obtained by nano intercalation, chemical grafting, end base plugging and other technologies.

The types of toilets are as follows:

1. According to the flushing method, it is divided into direct flushing type, siphon type, and siphon belt direct flushing type.

2. According to the drainage method, there are ground row type and wall row type.

3. According to the structure, it is divided into split type and conjoined type.

4. According to the material, there are several pure stupid types: ceramic, plastic, artificial potato pants, marble, and artificial agate.

5. According to the capacity of the water tank: it is divided into 6 liters and 3 liters.

6. According to the temperature, there are three kinds of high-temperature ceramics 1320 °, medium temperature ceramics 800 °, and low temperature ceramics 600 °.

1. What are the classifications of toilets - according to the direction of sewage discharge.

The rear row type is also called the wall row type or horizontal row type, and the direction of its sewage discharge can be known according to the literal meaning. When purchasing a rear toilet, the height of the center of the sewage outlet from the air should be considered, which is generally 180mm; The lower row type is also called the ground row type or vertical row type, which refers to the toilet with the sewage outlet in the air. The purchase of the lower toilet should pay attention to the interval between the center point of the sewage outlet and the wall, and the separation of the sewage outlet from the wall is divided into three types: 400mm, 305mm and 200mm.

Among them, the northern market has a large demand for 400mm pit spacing products. The southern market has a large demand for 305mm pit spacing products. Second, what are the classifications of toilets - by type.

The choice of toilet is mainly based on the size of the bathroom space. The split toilet is more traditional, and the consumption is to connect the base and the second layer of the water tank with screws and sealing rings in the later stage, which occupies a large space and is easy to hide dirt at the joint; The one-piece toilet is more modern, with a beautiful body shape, and the choice is rich and integrally formed. But the price is relatively expensive.

3. What are the classifications of toilets - press the water*

The purchase of a toilet depends on the direction of the drainage. If it is a rear flush type, you should buy a flush toilet, which uses the flush of water to directly discharge the dirt. The flush-down type sewage outlet is larger and deeper, and the dirt is directly discharged with the help of the flushing water, and its disadvantage is that the flushing sound is loud.

If it is a lower type, you should buy a siphon toilet. There are two types of siphon subdivisions, including radial siphon and vortex siphon. The principle of the siphon toilet is to use the flushing water to form a siphon effect in the sewage pipe to discharge the dirt, and its sewage outlet is smaller, less noisy and quieter to use.

The disadvantage is that the water consumption is large, and the storage capacity of 6 liters is generally used up at one time.