Can I still use my laptop if it gets into water? Can I still use my laptop after it gets into water?

It should work, I suggest you:

As soon as the laptop gets into the water, it must be immediately powered off and forcibly shut down, and the battery must be dialed. The shutdown here does not mean that you will be able to slowly click the mouse to shut down from the start menu, and the slower it is, the greater the damage to the notebook.

After that, disassemble the machine and clean up the parts that are easily damaged by liquids such as the motherboard and keyboard. To completely remove the motherboard, wash it with washing water, and dry the motherboard to 100 degrees in a dryer. to power on again. Don't leave anything to chance.

Sometimes the user turns off the machine and dumps the water, without other treatment, and after leaving it for a period of time, it is turned on. Generally, there are two results of this: one is that the machine cannot be turned on, and the other is that the machine can be used normally temporarily.

This kind of notebook that has not been treated with water will have very serious consequences if it is turned on again, maybe the water has not soaked into the motherboard and the inside of the machine, it may be fine at first, but in most cases, after a day or two of use, the machine will not be able to turn on the screen. In this way, it generally can't be repaired.

After drying at a temperature of 80-100 degrees for a few hours, let the motherboard dry thoroughly, and finally they wipe the watermark on the motherboard with alcohol before turning it on.

Don't turn on the machine when water enters, try to disassemble the machine as soon as possible to clean and dry the internal water traces, generally no problem, if there is still a problem, you need to find a skilled and experienced personal maintenance provider to help you overhaul, basically can be repaired.

Of course, you can blow it with a hair dryer and put it in the sun, but be careful not to tear the paper inside.

Find a way to dry it, and if you're lucky, you can use it.

It's best not to turn it on right away!!

The laptop got into the water,It works fine, but it may go wrong later. Here's why:

1. Take out the battery in time after the laptop enters the water, so as not to be affected by the current circuit, it is best not to turn on and off frequently, the motherboard has current in the boot state, and the water has a certain conductivity.

It can affect hardware such as motherboards.

2. When the notebook enters the water, you must clean up all the water vapor in the notebook, including using a hair dryer, absorbent paper, etc., and you can't simply take toilet paper.

Wipe it to avoid corrosion in the future, which will affect the service life of the computer.

3. Because the notebook is more precise and highly integrated, if you don't have the skills to disassemble the notebook, and it is difficult to clean it up yourself, it is best to seek the help of professionals and go to a professional repair shop.

Laptop.

Care recommendations:

1. Turn on and off the computer, and do not move the computer.

The power-on process is when the hard drive is at its most vulnerable. At this time, the speed of the hard disk bearing has not yet been stabilized, and if there is vibration, it is easy to cause bad rail. Therefore, it is recommended to wait for about 10 seconds after shutting down the laptop before moving the laptop.

2. Do not use a hair dryer in daily life to dry the body and parts of the laptop, the wind blown by this hair dryer may contain a large amount of negative oxygen ions.

It will directly affect electronic parts such as chips, and will have an adverse impact on long-term use. It is also possible to damage the components of the computer due to the high temperature of the hair dryer, so it is recommended to use a fan.

to blow dry. The rescue time for water ingress in a laptop** is within 24 hours, because most of the electronic parts inside the laptop are immersed in water, and the contact with air will cause oxidation or short circuit of the parts. Therefore, it is recommended to do the above self-first aid treatment as soon as possible and send it to the customer service center for maintenance as soon as possible.

1. First of all, immediately turn off the power of the laptop system, and remove the power cord and battery at the same time.

2. Use a clean rag or tissue paper to wipe the liquid on the surface of the laptop keyboard and the machine.

3. Move the laptop near the sink and tilt the laptop 90 degrees to pour out the liquid remaining inside the computer system and keyboard.

4. Use a clean rag or tissue paper to wipe the liquid on the surface of the keyboard and the machine again.

5. Let the laptop stand for 24 hours to dry the liquid inside, and do not use a hot air dryer to dry the case to avoid overheating and deformation.

6. Reconnect the power of the laptop and try to turn it on, if it can turn on normally, please back up the important data in the computer first.

7. Regardless of whether the laptop can be used normally or not, it is recommended to contact the service center immediately after the test and arrange for inspection and maintenance, so as to avoid sudden failure caused by oxidation and rust.

Step 1: After the laptop enters the water, the first thing is to cut off the power, and the power off here is to unplug the power supply immediately and remove it together with the battery, so as to avoid the motherboard from being short-circuited due to power.

Step 2: Remove the accessories, because the notebook is a device that combines precision accessories, and if there is a problem in one place, it will implicate multiple parts. It is necessary to remove the movable accessories on the notebook, such as external or replaceable module parts (such as optical drives, hard disks, floppy drives, expanded memory, etc.);

Step 3: Pay attention to be careful when disassembling external or replaceable module parts to avoid unnecessary secondary damage; Step 4: Pour out the water, even if we disassemble the optical drive, hard disk, and memory of the notebook, there are still many in the notebook. At this point, tilt the laptop in its entirety, then allow the water to flow out of the heat vents, pour as much light as possible, and send it to the service station to be handled by a trained professional engineer as soon as possible, so as to minimize the damage;

Step 5: Find a soft wet paper towel or soft cloth to gently wipe off the stains, and wipe off any remaining water in the keyboard. And try to avoid abrasion of the surface. Never use a hair dryer to bake.

Because there are a lot of small plastic components in the internal accessories of the notebook, it is easy to deform the components, which can lead to worse consequences. If you use a hair dryer, it is recommended to use a cold air to blow the water out;

Step 6: If the notebook cannot be turned on in the power-on state after the notebook is blown dry, then it is likely that the internal circuit of the notebook has been damaged, and in this case, you can only go to the maintenance center to test;

Hello, please wait 3 minutes, I'll be right away, and I'll reply to your question right away. Hope I can help you oh not a robot oh honey need to type to reply to you.

Good afternoon dear, I am a digital expert on Xiaomeng's mobile phone, and I will answer it for you now Not necessarily If you have really tried all the functions and the after-sales service has tested it for you, it will be fine, then it should be fine If there is a problem, it should be able to find out My friend's computer was immediately powered off when it was flooded last time It was fine after a night I hope mine can help you Happy New Year

After the laptop gets into the water, you need to unplug the power supply and remove the laptop battery as soon as possible to avoid a short circuit in the laptop caused by the motherboard being powered on. Use absorbent materials such as paper towels and cotton cloth to dry the surface of the notebook to prevent water stains from penetrating the notebook twice. Use screwdrivers, picks and other tools to remove the hardware inside the notebook and wipe it dry and air dry the water stains to reduce the risk of water stains corroding the hardware circuits.

If the laptop fails to turn on in the power-on state after the laptop is blown dry, then it is likely that the internal circuit of the laptop has been damaged, and in this case, you can only go to the repair center to test;

If the laptop is flooded, then the first time to unplug the power supply and battery, you can reduce the loss, and if you continue to operate with electricity, it is likely that the internal components of the fuselage will be short-circuited and damaged.

After cutting off the power supply, it is necessary to disassemble the machine in time, clean up the ingress water, and dry it thoroughly before continuing to use. If you can't get it yourself, go to the after-sales service or professional repair shop to find the master for help.

Don't turn on the computer after water enters, so as not to burn the motherboard, then open the back cover, dry it with a paper towel, and then dry it, if it can be used normally, then it will be fine.

It may work, you don't turn it on now, wait for him to do it, try it, if it doesn't work, take it and fix it. I'm afraid that some parts will burn out.

Notebook life.

The cost of the screen of the notebook accounts for a large part of the overall cost of the notebook, and it is extremely fragile, so we should protect it well. Adding a protective film can play a certain role in protection, and you can choose some brand-name products, so that the effect will be better. Over time, the screen of the laptop will become more and more yellow, which is the phenomenon of aging of the lamps in the screen.

Generally about 4 years, you can use it, but it takes 4 years, the performance is a big piece of poor performance, if you just surf the Internet or something, you can barely use it, but after a long time, the display will be yellow, not so bright, the keyboard will gradually fail, all parts will age, then it depends on how strong your machine is, the general computer is good for a year.

Due to the relatively high manufacturing process requirements of laptops, generally speaking, its hardware rarely has big problems within 5 years (unless it is often turned on for a long time, it is important to know that the heat dissipation of the notebook is limited, which cannot be compared with large computers), but in laptops, the LCD screen is generally the first to have problems.

The normal service life of the general liquid crystal is 4 to 5 years, after this time is not broken, but there will be uneven color, in recent years, the new high-brightness liquid crystal has made great adjustments in the process, so that its life has reached 7 to 8 years, but the general conservative life is 7 years.