What to do if the elevator compensation chain PVC rubber is broken

I have a knot to be connected, I use glass glue to make it solid, mainly because there is a sound, a high-speed ladder, otherwise it will be placed.

It's okay.. It doesn't affect. If there is a sound, wrap the cloth.

Hello, I am happy to serve you and give you the following answers: The solutions and practical steps for repairing the damage of the outer skin of the elevator compensation chain are as follows: 1

First of all, check the damage of the outer skin of the elevator compensation chain, determine the location of the damage, and determine the degree of damage. 2.Then, clean up the residue from the broken area and wipe it clean with a clean cloth.

3.Then, the compensation chain skin at the damaged part was pasted back into place with hot melt, and the compensation chain outer skin cavity at the damaged part was pasted back into place with hot melt. 4.

Finally, the compensation chain skin at the damaged part was pasted back into place with hot melt, and the compensation chain skin at the damaged part was pasted back into place with hot melt. Personal tips: When repairing the damage of the outer skin of the elevator compensation chain, pay attention to cleaning the residue at the damaged place, and paste the outer skin of the damaged compensation chain back to the original position with hot melt to ensure the repair effect.

Summary. Hello, dear, glad to answer for you; The damage to the outer skin of the elevator compensation chain can be repaired in this way; Elevator compensation chain skin damage can be replaced and repaired, if the damage is more serious, it is recommended to replace a chain in the entire elevator maintenance process, to ensure the normal use of the future, if the damage is not a special product of the same locking strength of the steel wire buckle the broken ring, can not affect the use, and after the maintenance and then do a bit of anti-corrosion on the elevator in our daily life is still more important, in order to maintain the safety of elevator travel, in addition to regular maintenance, If there is damage, it is still necessary to repair it as soon as possible, and the elevator has a certain life, and the elevator for too long you should replace it as a whole.

Hello, dear, glad to answer for you; The damage to the outer skin of the elevator compensation chain can be repaired in this way; Elevator compensation chain skin damage can be replaced and repaired, if the damage is more serious, it is recommended to replace a chain in the entire elevator maintenance process, to ensure the normal use in the future, if the damage is not a special product of the same locking strength of the steel wire buckle the broken link, can not affect the use, and after the maintenance and then do a bit of anti-corrosion can be the elevator in our daily life is still more important, in order to maintain the safety of elevator travel, in addition to regular maintenance of the trouser stoolIf there is damage, it is necessary to repair it as soon as possible, and the elevator has a certain lifespan.

How to deal with the rupture of the elevator compensation chain? How to deal with the rupture of the elevator compensation chain:

Use the same locking strength of the steel wire to buckle the broken ring, the skin break does not affect the use, do a bit of anti-corrosion, and check the broken part of the chain every time the branch is maintained, and it will be replaced if it is too rusty.

Extended information: the role of the compensation chain: when the elevator is on the top floor, the wire rope is on the counterweight side, and when the elevator is on the bottom floor, the wire rope is on the car side.

That is to say, with the continuous up and down movement of the elevator, the weight of the wire rope on the heavy side and the car side is constantly changing, which will produce a dynamic weight slip imbalance, and the action of the compensation chain compensates for this part of the imbalance.

It is used to compensate for dynamic balance, because the wire rope has weight, and with the continuous up and down movement of the elevator, there will be a dynamic imbalance, so the compensation chain is used.

Quality judgment: The compensation chain can make the elevator run safely and smoothly and achieve the effect of silence and comfort.

There are 3 main characteristics of a poor quality compensation chain:

1. The elevator shakes violently during operation, causing the car to shake and make noise, which greatly reduces the passenger experience;

2. Short service life, poor flexibility, not cold-resistant, easy cracking of the outer coating, violent shaking after cracking, etc.;

3. Poor strength and instability, easy to cause chain breaking accidents.

Summary. Elevator compensation chain skin damage can be replaced and repaired, if the damage is more serious, it is recommended to replace a chain in the whole elevator maintenance process, to ensure the normal use in the future, if the damage is not particularly serious, with the same locking strength of the steel wire buckle the broken link, can not affect the normal use, and after the maintenance again to do a bit of anti-corrosion.

Elevator compensation chain skin damage can be replaced and repaired, if the damage is more serious, it is recommended to replace a chain in the entire elevator maintenance process, to ensure the normal use of the future, if the damage is not particularly serious, with the same locking strength of the trap macro to answer the clear ruler to remove the steel wire to buckle the broken link, can not affect the normal use, and after the maintenance to do a little anti-corrosion.

Because the wire rope has weight, and the quality of the chain is not the same, it is necessary to find a professional maintenance team to replace it. In order to maintain the safety of which Kai elevator travel, in addition to regular maintenance, if there is damage, it is still necessary to repair it as soon as possible, and the elevator has a certain service life called by Li, such as the elevator that is too long to replace as a whole, for some people who want to buy second-hand houses, in addition to considering the house itself, but also to investigate the facilities and equipment inside and around the house.

Use the same locking strong steel wire to buckle the broken ring of the rubber does not affect the use, do a little anti-corrosion can Zheng Ying, every time in the future when the maintenance is called, check the broken chain, rust too much to replace.

Hello, I am very happy to be able to find out that the elevator can be repaired if the elevator is damaged. The specific maintenance steps are as follows: 1

First of all, the elevator needs to be stopped and powered off to ensure safety. 2.Next, use a tool to remove the compensation chain and remove the damaged rubber sleeve.

3.Clean the compensating chain and sprockets, and inspect the sprockets for wear or damage. 4.

If the sprocket is damaged, it needs to be replaced with a new one. If there is no damage, you can proceed to the next step. 5.

Install the new sleeve on the compensation chain to ensure that the sleeve fits snugly to the chain. 6.Reinstall the compensation chain to ensure that the chain is properly mounted on the sprockets.

7.Finally, it is enough to conduct a test to ensure that the elevator is operating properly.

If the elevator compensation chain rubber sleeve is damaged, it can be repaired or replaced. The compensation chain rubber sleeve is an important part in the elevator, which can play a role in protecting the compensation chain and preventing the chain from being worn or rusted due to long-term use. If the compensating chain rubber sleeve is slippery and damaged, it will affect the stability and safety of the elevator.

Generally speaking, repairing the rubber sleeve of the compensation chain of the electric roller ballast ladder needs to be repaired or replaced according to the specific situation. If the damage is minor, it can be repaired, such as repaired with a special glue. If the damage is severe, it is necessary to replace the compensation chain sleeve with a new one.