Which is the best Chinese medicine pill making machine, the introduction of Chinese medicine pill ma

I bought the DZ-20 for a month, and I feel that the principle is quite simple, not worth more than two thousand, and you brothers can buy Olli or Yongli, and it is also a brand machine, as long as it is about 1600, and it can be drawn If the motor is not broken, it is not easy to break in other places.

1 The powder should be ground fine enough 80-100 mesh I grind it to 80 mesh Use an ordinary grinder (a few hundred yuan) to powder it several times If you use thousands of flowing mills, it should be better because I haven't used it yet, and it's not good to say too much.

2 Do not use a brush after crushing the powder with a grinder, because the brush will lose the hair and it will get into the balls made later, so you should use a plastic brush so that the hair will not fall out.

3 This machine has its own live medicine The ratio of starch to water has to be mastered by yourself According to the formula given by the seller, it is not ideal I use corn starch.

Because there is no sweet potato starch locally, the ratio I use is corn starch 15 grams and 100ml of water The powder depends on the specific quality, because some of the powder is heavier, and some are lighter.

4. This machine presses the cake and the strip is defective, always sticky into a lump, very troublesome, I bought another manual meat grinder, 30-40 yuan (the diameter of the meat grinder's discharge port must be the same as the diameter of the pill), so that the medicine strip is very round, and the balls are much faster.

5 It is recommended that friends with a large amount of pills should buy more than 5,000 or directly out of the strip, which is much more convenient.

I hesitated for a long time to buy this machine because there was basically no experience on the Internet, and now I'm going to write so much.

Changsha Changhong, the manufacturer includes freight, one-year warranty, lifelong maintenance. If you need more information about the pill making machine: such as more products**, actual products**, products**, etc., please check Changsha Changhong Pharmaceutical Machinery and Equipment Factory Co., Ltd., contact us.

The Chinese medicine pill making machine is a new type of pill making machine developed by the company on the basis of LD-88 series products, which has (1) small size;

2) Light weight; (3) Stable performance; (4) Simple operation; (5) Easy to clean; (6) Power-saving safety; (7) Low noise; (8) beautiful appearance, at the same time can make two kinds of pills of different diameters, to solve the general small pill making machine can only do one diameter pill technical defects, the small pill making machine also has the function of drying and coating, so that its scope of application is more extensive, such as individuals, hospitals, private clinics, Chinese medicine stores (rooms), pharmaceutical laboratories, school teaching, on-site processing and sales points of precious tonic and food processing pill food development, etc.

This machine is composed of two parts: a pill maker and a high-pressure strip ejector, the high-pressure strip ejector can increase the viscosity of the material with poor viscosity, so that the extruded medicine strip is uniform and not easy to loosen, so that the pill made is smoother, moisturized, disintegrates slowly, and the medicinal power is long-lasting. The pill maker has two kinds of pill making rollers, which can make two different diameter pills at the same time, making it more diverse in structure than ordinary small pill making machines.

Technical parameters: pelleting specifications: 4mm, 6mm, 8mm 10mm, 12mm (two specifications are optional).

Production capacity: 2-15kg h (subject to 6mm).

Motor output power: host power kw (electric heating power).

Motor voltage: 220V, 50Hz

Motor speed: 1440 rpm Working speed: 50 rpm.

Dimensions: 550 330 250mm

Machine weight: 35kg

ZW09X Guangzhou Leimai Machinery Equipment****.

Changsha Changhong Pharmaceutical Machinery Factory Direct Sales.

Talk about slag ** discount, the manufacturer includes freight.

The small pill making machine is mainly used for the production of Chinese herbal medicines. It can produce pellet granular products such as dense pills, concentrated pills, watertight pills, coating, drying and food processing with high efficiency. The machine adopts high-precision mechanical transmission.

It can be processed continuously and automatically (or manually). The traditional Chinese medicine, health care and food industries produce round, flake and strip products that need to be formed. The thermoelectric drying process is used to coat the finished product for side coating and sugar coating drying.

Small Pill Making Machine Features:

1. The machine has stable performance, simple operation and easy cleaning;

2. The machine continuously discharges, rubs and dries the pills at one time, and the size of the pill round is uniform, not easy to break, and there is no need for screening;

3. The applicability of this machine is strong. It can produce soft and hard pills of various viscosities, with a high pass rate of pill making, especially suitable for small pharmaceutical factory trial room, Chinese medicine research institute, hospital, pharmacy and health care, food pill production.

Main technical parameters of small pill making machine:

1. Functional range: it can produce honey pills, concentrated pills, water honey pills, water pills, coating, drying and pill-like food.

2. Shot making specifications: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm

3. Yield: 7kg h (subject to 5mm).

4. Motor output power: electric heating 1kw

1) Voltage: 220V, 50Hz;

2) Voltage: 110V, 60Hz;

The motor speed is 1400 rpm, and the working speed is 50 rpm.

5. Scope of application: suitable for small pharmaceutical factories, large and medium-sized pharmaceutical factory trial production rooms, research institutes of traditional Chinese medicine, research units of traditional Chinese medicine, hospitals, private clinics, traditional Chinese medicine stores (rooms), on-site processing of tonic sales counters and the development of pill food in food factories.

6. Dimensions: 546 321 247mm

7. The weight of the machine: 30kg.

8. Structure: This machine is composed of extrusion strip clutch roller, shot making roller, water shot coater, full gear variable speed, motor, electric heating and other components.

9. Technical characteristics:

1) One machine is multi-purpose, easy to disassemble and wash; (2) Small size; (3) Light weight; (4) Stable performance; (5) Simple operation; (6) Easy to clean; (7) Power-saving safety; (8) Low noise; (9) Beautiful appearance; (10) The parts and shells in contact with the drug are all made of stainless steel, which conforms to GMP standards.

The traditional Chinese medicine pill making machine can produce honey pills, concentrated pills, water honey pills, water pills, and Qiaoyun pill-like food, and can also be coated and dried. Make the finished pill uniform and beautiful. It is especially suitable for small pharmaceutical factories, large and medium-sized pharmaceutical factory trial production rooms, Chinese medicine research institutes, Xiao or Liang hospitals, private clinics, Chinese medicine stores, on-site processing of precious tonic group sales points, and the whole machine is made of stainless steel, in line with GMP standards.

And small size, low energy consumption, high efficiency, low noise, no pollution, simple operation, safe and reliable, this machine adopts 220V lighting electricity, and it is convenient to take the electrode.