The weight that a fishing rod can bear, the difference between the dead weight of the rod and the ne

Hello, most of the fishing rods.

This question actually asks about the fishing rod weight, and the following will introduce you to this meaning:

The so-called rod barrel indicates the fishing weight of the rod, that is, the fishing force, which means that the angle of the rod bending is fixed at 45 degrees, the rod is bent directly below, and the rod tip is bent to the horizontal position of the tail end of the grip, and the gravity of the rod is measured in kilograms, which is not the maximum value of destroying the strength of the rod. Fishing weight is an important indicator of a fishing rod, but once you have a basic net fishing weight (which is common with both good rods), you don't need to pay too much attention to it. The main reasons are:

1. Fishing (especially catching larger fish) is actually to lead the fish to the side, not to hang the fish, and fishing is not to hang the fish!! Since it is to attract fish, it is not only the strength of the fishing rod, but also the elasticity and recovery of the fishing rod, so no one thinks that a hemp rope and steel bar are good fishing rods. 2. Net fishing weight and rod weight are basically a pair of contradictions, generally the net fishing of the heavy rod is heavier than the light rod, so the net fishing is important and the quality of the fishing rod is not fundamentally related, otherwise, you have to use the crane arm to fish.

In addition, it is not very interesting to study the static breaking force of the fishing rod, because fishing is a dynamic process, and the angler's on-site position adjustment and force angle adjustment skills often determine whether the line is tangent and broken when the big fish is on, otherwise there will be no skill level of fishing. The performance of a rod is comprehensive, and it is inappropriate to overemphasize the net fishing weight, or even use it as the only indicator to measure the rod, and it is also a trick for some people who cannot make a good rod to mislead anglers. Because it is much easier to make a rod with a big net fishing than it is to make a rod with good overall performance.

The weight is the weight of the fishing rod, which is the value of the fishing rod when it is bent to a large position, and the net weight is the value of the fishing rod when it is bent to the grip.

The specific differences are:

1. The net fishing weight of the fishing rod is the fishing force, which means that the bending angle of the fishing rod is fixed at 45 degrees, the fishing rod is bent directly downward, and the rod tip is bent to the horizontal position of the tail end of the grip, and the gravity of the fishing rod is measured in kilograms, which is not the maximum value of destroying the strength of the rod.

Fishing weight is an important indicator of a fishing rod, but once you have a basic net fishing weight (which is common with both good rods), you don't need to pay too much attention to it.

Fishing weight refers to when the angle between the rod and the ground reaches 45 degrees, when the rod is bent directly down, when the rod is slightly bent to a large position, the weight value of fishing, it should be noted that this value generally does not refer to the maximum tension value of the rod, at this time the rod is not broken, but refers to the tension value in this state, this value we call fishing weight, also known as net weight.

2 net fishing weight, net fishing weight is the limit of the fishing rod tensile value, simply put, when the fishing rod catches a weight, a little plus about 10g of weight will be broken immediately, this is the net fishing weight.

The net fishing weight is generally not very high, and the net fishing weight index reaches 2500g, which is already a very large value, but the instant tensile value of about 3 catties of fish out of the water may be about 10 15 catties, if it is a wild fish, the instantaneous tensile value of the water is similar to that of herring or even sturgeon.

The significance of the net fishing weight is that the manufacturer cannot describe the maximum tensile force that the rod can bear in each water, and can only indicate the net fishing weight according to the use.

To put it simply, it is to first clarify the fishing application scenarios, such as tonality and occasions, and generally now the tonality will be marked: two.

VIII.III. Seven, nineteen, and then mark the net fishing weight, which means that in this tonal scene, the theoretical value can fly up the fish of this weight directly, that is, pull it up directly, if it is a slippery fish, it must be able to catch a bigger fish.

Of course, most manufacturers will not show this actual value, and generally use 60 70 of the actual net fishing weight as the net fishing weight identification.

Don't you know if you call it?

Fishing weight refers to the weight of the fishing rod when the angle between the rod and the ground reaches 45 degrees, when the rod is bent directly downward, and when the rod is slightly bent to a large position.

It should be noted that this value generally does not refer to the maximum tensile value of the rod, at this time the rod is not broken, but only refers to the tensile value in this state, this value is called the fishing weight, also known as the net weight.

The weight of the rod usually refers to how much weight the rod can catch without roding, and the higher the relative weight value, the tougher the rod and the greater the possibility of catching larger fish. But this fishing weight value is basically a kind of propaganda of the business, are theoretical values, there is a big error in actual operation, how much fish can be caught or have a lot to do with the technology of individual fishing operations, and the fishing rod is only one aspect.

That is, the fishing rod can lift many things, generally 1200g-1000g

Fishing rodsGram weight refers to the weight of the whole rod without the rod cap and rod plug。Originally used by humans to make a living by fishing, the rod is now commonly used for recreational fishing in outdoor sports, and is also used in some competitive fishing sports or outdoor competitions.

A fishing rod is a tool for catching eggplant, which is in the shape of a slender and multi-knotted rod, usually with a handle, which gradually becomes taper and sharpened from the handle to the back end, and is used by connecting a fishing line to a hook with bait.

The structure of a fishing rod

Matching joints, an ordinary fishing rod is composed of a number of hollow matching joints, nested and put away when not in use, and pulled out or plugged in groups in turn when in use. The thinnest section of the rod's knot is called Section 1; From the inside to the outside, that is, from fine to coarse, it is section 2, section 3, and so on.

The first section is also called the section of the slurp, and the section with the thickest handle is called the section of the handle or the section of the handle, also known as the section B. The rod has as few as 3 5 knots, as many as 7 or 8 knots, and even some unconventional stream rods reach 10 knots. Generally, the more nodes there are, the shorter the length of the sections, the more convenient it is to carry, but the lower the strength.

Therefore, the general short-knuckle rod is used as a stream rod.

Rod caps, accessories designed to cover, fix or protect guide eyes when the rod is retracted.

Rock rod. Sea rods generally have protective caps: straight protective caps, triangular protective caps and special protective caps for rock fishing rods, etc., and the colors are transparent, translucent, black and gunsmoke color.

The cap is required to be consistent with the thickness of the fishing rod, and if it is too large, it is easy to fall off and break the guide eye. Covers that are too small can be easily damaged and can damage the guide eye, so neither too large nor too small is acceptable.

The cap of the hand rod is generally simplified to the front plug of the insertion style, and the front plug is generally wooden or rubber. After a long time, the wooden rod cap is easy to shrink and fall off; Rubber is elastic and has a suitable tightness, and has become a commonly used rod cap material. The design of the rod and hat is also varied, and some mid-to-high-end brands have their own unique rod and hat design to attract anglers to buy.

Fishing rodsThe net weight of 68g is the weight of the wax ruler cover of the hand rod, which refers to the weight of the fishing rod after removing the front and rear plugs, generally speaking, if the same length of the fishing rod produced by the same material and process, the more layers of cloth winded, the heavier the strength, and the lighter it is, the lower the strength.

It can be concluded that the weight of the hand rod is not the weight of direct weighing, and it is necessary to remove the front and rear plugs and weigh them, and then the accurate weight can be obtained, and the rod can be better selected according to the needs.

When we choose a fishing rod wheel, the first step is to pay attention to the quality of the fishing rod, the second step is to choose the right fishing rod for your own situation according to the comprehensive performance of the fishing rod, it is best to know the net weight of your fishing rod before determining the fishing rod, know its maximum bearing range, and do it in mind, so as not to break the rod due to insufficient bearing capacity.

Fishing rod selection tips

1. Appearance and feel: the most important thing is that you like it.

If you don't like the appearance and livery of a rod, don't buy it, after all, you have to face it all the time when fishing. The shape of the handle and the feel of the grip are also the first things to consider.

2. Material: Not the higher the carbon rod, the better.

Carbon fishing rods are divided into: carbon-packed, pure-carbon, and high-carbon. Fishing rods, but not all rods are made of a kind of carbon cloth.

done. The tonality of the fishing rod is actually modulated with carbon cloth of different modulus.

Some fishing rods are made of carbon cloth below 30t, but only a very small amount of 40t or 46t carbon cloth is used, which is called a high carbon rod, which is actually a practice of confusing the public. Anglers can be identified by weighing and feel. A true high-carbon rod is light and stiff.

Put the two poles together, and when you compare, it is obvious.

3. Details: hardness, waist strength, elasticity, center of gravity.

The rod is all withdrawn, and the handle of the rod is held with one hand to vibrate up and down, left and right slightly, or make small circles continuously, and feel the tonality of the rod. Up and down a small amount of vigorous vibration to close the rod, listen to whether there is a rattling sound, feel whether the joints are tightly combined.

What is the difference between the material weight, net weight, self-weight, and finished product weight of the table fishing rod and hand rod?

1. The nature of the hand is different: the weight of the material can be said to be the weight of the semi-finished hand rod, which is the sum of the weight of the carbon cloth used to produce the hand rod, the weight of the epoxy resin or unsaturated polyester of the bonded carbon cloth and the weight of the rod. The net weight of the hand rod is the weight of the finished product, and on the basis of the semi-finished product, the weight of the paint, explosion-proof ring, etc., of course, neither of them includes the front and rear plugging.

2. The weight is different: the painted weight of the rod, some anglers say that it can be ignored, in fact, some repainted hand rods account for a considerable proportion of the painted weight, for example, a heavy painted 75 grams of fishing rod, the weight of the material may account for about 48 grams, and the weight of the paint may account for more than 20 grams. 3. Different characteristics:

After the semi-finished product is completed, only the transparent resin paint is applied once, although the rod body is not as good as the heavy rod, but the proportion of paint weight is small, and the weight of the rod is relatively light. Rough and bad.

Its length is generally meters, meters, meters

Fishing rods are classified according to their use: they are divided into two types: sea rods (also known as throwing rods and throwing rods) and hand rods. In China, the fishing rod is equipped with a reel, a guide eye, and a fishing rod that can be released and reeled.

In some areas, it is also called throwing rod and throwing rod. The rods of the sea rod are made of bamboo, plastic, fiberglass, and materials containing part or all synthetic carbon fiber.

The sea rod has the functions of extending the fishing point with a long cast line and freely releasing and reeling the line according to the amount of winding. In fact, according to this function, sea rods are divided into boat fishing rods, rock rods, beach fishing rods, sea bream fishing rods, trout fishing rods and other categories.

Choice of length.

Before buying a fishing rod, you must first determine the length of the rod you are buying, whether you want to buy a long rod of more than one meter, or a short rod with a length of about 600 mm.

Because the long rod is missing a few interfaces, not only the use of the force is more uniform, and the weight will be lighter, but do not underestimate the weight of these interfaces, in the dense fish field, every day need thousands of times to hit the rod, lift the rod, even if only a few grams of weight on the fishing rod, the labor intensity will be very different.

The advantage of a short rod is that it is easy to carry, whether it is placed in a basket or in a rod bag, and can even be strapped horizontally to the rear hanger of a bicycle without much impact on safety. The disadvantage of the short rod is that there are several more interfaces, not only the force is not as uniform as the long rod, but compared with the long rod, under the premise of the same length, the weight of the short rod is also higher.

"Fishing Open Class" No. 60 How to choose the length of the fishing rod for actual fishing.

According to the People's Republic of China's light industry "new standard for fishing rods", drafted by Guangwei Group and the National Fishing Gear Quality Supervision and Inspection Center, implemented on January 1, 2005. The calculation method is as follows: l=lo-.

where L is the actual length used, Lo is the indicated length, and N is the number of segments of the rod. I'm afraid you still don't understand.

For example: a fishing rod marked with 4 meters 5, a total of 5 sections, its length should not be less than 442 cm, 5 sections minus one section, minus the rod that section, 2 multiplied by 4, is 8, and then 4 meters 5 minus 8 to get 4 meters 42, below the number of times is not standard. For another example, the same 4.5 meter rod, if it is a nine-section, 9 minus 1 is 8, 2 times 8 is 16, 4 meters 5 minus 16 cm to get 4 meters 34 cm, below this number, it is not standard, in other words, the lap point error of the fishing rod is 2 cm, generally reserved in the next section, with the date of use, the rod will be longer and longer.

The rod subtracts the section, and multiplies the number by 2 for a few sections, and subtracts the number of meters marked to obtain the number, which is the standard basis number.