What is the best material to use for a fishing rod?

The following points should be paid attention to when wiring the sea pole:

1. As long as the strength is enough, use thinner lines as much as possible. For fish of the same weight, the line used for the hand rod should be thicker than the line used for the sea rod.

2. Use soft threads as much as possible.

3. After changing the thin line, the wheel will inevitably empty a large circle, and the line will inevitably rub against the wheel body when it passes, reducing the flight distance of the fishing rig. Wrap some waste thread around the wheels to occupy some space, and then wrap new threads. In order to reduce the friction between the line and the wheel wall.

The sea rod wheel must be adjusted to drain the force.

When the fish bites the hook and lifts the rod, when the tension between the person and the fish is greater than the tension limit of the line, the line will be tangent. If the drain force is adjusted to a tension limit that is less than the line, when it encounters a big fish, the line will be pulled out of the wheel, thus avoiding tug-of-war and tangents.

Adjust the discharge force of the wheel, according to the different diameters of the line, first look at the nodule tension of the line, and then assemble the sea rod, connect a spring scale at the nodule of the main line, pull outward, adjust the discharge force according to the reading of the spring scale, when the discharge force is close to and less than the nodule tension is pulled out, the discharge force is adjusted.

Some fishing lines are inherently substandard products, and this method can also be used to check whether the quality of the line is qualified. When you already have this kind of line in your hand, you must first break it once to obtain the ultimate tensile force value, and use this as the standard to adjust the discharging force, when it is close to and less than this standard.

Now Taiwan fishing is a carbon rod Taiwan fishing generally uses a line of equal rod length (counting the brain line is slightly longer than the rod) There are also longer than the rod Lifting the rod is too tired and not recommended.

Carbon fiber rods, also known as carbon rods, are made of high-tech carbon-dimensional materials. It has electrical conductivity ( cm - and very good tensile strength (e.g. kg mm2 - 400 in 12000 filament units).

At present, the vast majority of carbon fiber fishing rods are made of shuttleless spinning carbon fiber longitudinal cloth tubes, which are cured by impregnating resin.

Fishing rodsMediumThe material of the fishing rod of the carbon rod is good.

Carbon rod, also known as carbon fiber.

A fishing rod, or carbon rod for short, is a type of fishing rod. to carbon fiber.

The fishing rod is made of composite materials and is woven longitudinally with high-tech carbon-dimensional materials. The carbon rod is relatively lightweight, high-quality, elastic, and has the characteristics of high temperature resistance and corrosion resistance.

Introduction to other types of fishing rods:

1. FRP rod.

Fiberglass. Transparent rod, also known as glass saturated resin rod, is a rod formed by high temperature curing of unsaturated trees and resin bath-soaked glass fiber cloth. The production of this fishing rod requires strict technology, especially due to the unsaturated resin and glass fiber cloth and resin and glass fiber cloth fully melted, in the high temperature curing process to improve its physical and chemical properties, the toughness of the real fishing rod is excellent, is the top grade in the glass fiber rod.

2. Glassy carbon synthetic rod

Glassy carbon synthetic rod is also known as carbon mixed rod, some manufacturers for the sake of excellence, performance ratio, the production of some mixed material fishing rods, in the inner layer and outer layer with different fibers; There are also the first three sections made of carbon fiber, and the tail section is made of fiberglass. This kind of fishing rod has certain advantages in terms of ** and performance.

For example, to a certain extent, it makes up for the lack of sensitivity of the glass rod, and in terms of insulation, due to the use of FRP tail joints, it greatly reduces the possibility of electric shock in the high-pressure environment of thunderstorms, and is correspondingly cheaper than the general carbon rod, but this rod is also easy for anglers to misunderstand that it is a fake carbon rod and is not accepted, in fact, it is also a good choice to buy this rod.

The carbon fiber synthetic rod material of the fishing rod is the best.

At present, the most commonly used carbon mixed rod and carbon rod are the main ones, which are light weight, high hardness and not easy to deform. However, the only drawback is that it is electrically conductive, which makes it dangerous to fish during thunderstorms or in environments with high-voltage lines with power poles.

In the past, fishing rods were mostly made of glass fiber, which was characterized by strong strength, large dead weight, not easy to deform, and non-conductive. These old-fashioned rods are still available on the market, as well as a mix of carbon and glass fiber, but they are heavier and not lighter than those with a high carbon content.

Material characteristics

Bamboo rod is the most primitive fishing rod, many old anglers like to use this retro and exquisite fishing rod, but after the advent of fiberglass fishing rod, bamboo rod has been gradually eliminated, and only a few high-end and rods are still bamboo rods.

FRP rod is the first generation of fishing rod to modernize the product, the advantage is high strength, durable, cheap, the disadvantage is the weight of the weight, poor feel, in the lighter carbon fishing rod after the advent of the FRP rod was gradually eliminated.

Compared with bamboo rods and FRP rods, carbon rods have the advantages of good toughness, light weight and good feel, but the disadvantage is that they have strong conductivity, so they must not be used in thunderstorms and wires.

Fishing rods made of fiber.

It's better. The first is carbon fiber.

It is very light from the point of view of weight, relatively lightweight, flexible and labor-saving when operating, and novices can also operate it relatively easily. In addition, they are also relatively resistant to corrosion and are not easily damaged. The second type is fiberglass.

theirs are more affordable, very flexible, and have good tensile strength. If you use these two rods, it is recommended to use a rod with a length of less than 10 meters, which is more effective.

A fishing rod is a tool that can play a major role when fishing, so you need to pay attention to your choice. There are many fishing rod materials that can be seen on the market, and their differences are still relatively large, and there are many differences. When choosing, try to use the most handy and effective fishing rod.

Among the many materials of fishing rods, the effect of fiber material is very good. The first is fiberglass, and the second is carbon, both of which are better. Generally speaking, they do not exceed 10 meters, and they are relatively light and easy to use.

The first is carbon fiber, and their advantages are very obvious. In terms of weight, they are relatively light in weight and relatively light in general, so that they are very flexible and labor-saving when they are used, and even novices will find it more convenient to operate. Moreover, they are very resistant to corrosion and are not easily damaged.

Of course, their ** will be relatively higher, which is one of their disadvantages. The second is fiberglass, which is relatively cheap and affordable. And they are also more flexible and have good tensile strength.

But they are comparatively heavier.

As mentioned above, there are many specific materials for fishing rods, so you must pay attention to the selection. Sturdiness and durability are two of the more important criteria, and when choosing a fishing rod, you can choose according to these two criteria. The carbon fiber rod mentioned above is very suitable for both characteristics of being strong and durable, and can be used for a long time, and it is relatively lightweight.

In addition, there is another type of fishing rod that also meets the requirements of strong and durable, that is, titanium alloy.

Fishing rods, they are also strong and durable, do not corrode easily, and do not age easily, and can be used for a long time.

It is a low-priced fishing rod, made of fiberglass ladle carbon, which is quite convenient and general, and novices can consider choosing it if they are advanced, and they can lose the equipment in the later stage.

A fishing rod is a fishing tool in the shape of a long, slender and knotted rod, usually with a handle, which tapers and sharpens from the handle to the back end, and is used by connecting a fishing line to a hook with bait.

Originally used by humans to make a living by fishing, the fishing rod is now commonly used for recreational fishing in outdoor sports, and is also used in some competitive fishing sports or outdoor competitions.

Fishing rods are divided into three series according to the material: bamboo, glass fiber reinforced plastic (glass fiber material) fishing rod, and carbon fishing rod. Among them, carbon fishing rods are divided into low-carbon fishing rods, high-carbon fishing rods and ultra-high-carbon fishing rods according to different carbon content, and at the same time, a company in the United Kingdom has launched a high-carbon fishing rod with nano-boron fiber, and the industry is accustomed to merging the latter into a separate category.

Fishing rod making needs: bamboo, dropped line, gooseskin tube, lead skin (fuse, gold source toothpaste skin can be replaced), hook, old-fashioned fish float or reed rod, knife, scissors, pliers, sandpaper.

1. Cut a bamboo. Bamboo should choose relatively straight old bamboo, and the old bamboo is yellow. The length is chosen by yourself, and it is better to choose black bamboo where there is black bamboo, which is just the right size and very straight.

2. Handle bamboo. Remove the branches and leaves, burn the bent parts with fire, and then press them. Then use sandpaper to polish it smoothly and finish the dress, so that the rod is ready.

3. Integrate fishing lines, hooks, chicken skin tubes, lead skins, and fish floats. Tie the hook to the fishing line, then roll it three centimeters above the hook and gently clamp it with tongs. Then cut the line, which is about the same length as the length of the bamboo rod.

Then cut a one-centimeter-long chicken skin tube, put it on the fishing line and insert the fish float.

4. Tie the fishing line, and tie the fishing line made in the previous step to the fishing rod made before. So that an old-fashioned fishing rod is done.