I want to install win98 but I don t have a disk

You don't have anything, whether you have a disk, whether you can burn the optical drive, there are only two options, you can't do it, what do you teach me to do? Buy 98 plates! Oh I see.

Go buy a handful, now the disc piracy is only 3 yuan.

Copy to hard drive? What system is it used for? xp？win7？Can I install it when I run setup in it? Obviously not, because people are not installing win8, but win98

What about booting with a disc? People don't use optical discs, maybe they don't have optical drives.

That boots with a USB flash drive? How does copying it work?

Of course, people who can pretend will know if you say so, but friends who ask questions obviously can't, or they wouldn't ask like this.

Let's talk about the specific steps in a nutshell:

2、Put the prepared win98 into this USB flash drive,It doesn't matter which directory。

3. Start the computer with a USB flash drive, don't enter PE, go directly to DOS

4. Then switch to the directory where win98 is located, the driver may want to switch, and you will use the switch driver command, such as e: f: and so on, and use the dir command to view, and finally you need to use cd to switch the directory.

5. Then run the setup command and install it as prompted.

Of course,You can also copy the win98 of the U disk to the hard disk and then install it,This is also a way to speed up the installation。

If you are familiar with DOS, you can use the fdisk partition first, and then format c: s grid c disk, so that you can use the hard disk to start the computer, and then install it directly, so that the U disk is not used.

It seems that it can be accessed.,That's easy to do.,Go to Huajun Software Staring Park、Feifan Software、Software Home and so on, these ****win98 installation files with a good reputation,And then install it according to the Tikai Zha Prefecture Show**Liang Chaos。

First of all, back up the win98 installer to the hard disk,Remember not to put it in the system partition (that is, c:),Then re-enable the floppy disk to boot the computer into DOS mode,Enter the directory you backup,Execute the setup file on it,Just install it according to the prompts,Remember to copy the serial number first。

DOS to enter the folder of the hard disk, and press Enter after setup.

What's the use of pretending to be this? Completely eliminated.

If you don't need to install the CD or boot disk with 98, then it means that you can't format the C drive, then it's actually an overwrite installation.

The method is to restart the computer, press F5 or F8 to enter DOS mode (select item 5), and then enter the drive letter with the 98 installation source file, if your 98 source file has been copied to the D disk Win98SE folder, then enter it under DOS.

d: Enter.

Win98SE Enter.

setup Enter.

You can override the installation.

If you can still enter the system, you can find the win98 installer on the hard disk, what is needed is the complete installer, you can double-click directly in the system, and install it.

If your knowledge is still enough, you can press F8 when you start the machine, and choose to enter the DOS installation, which is safer and primitive, after all, 98 is based on the DOS layer to run, remember to back up useful files to non-system partitions before installation.

It's not difficult to install the system, good luck.

You first use the disk to copy the win98 installer to the c drive, and then restart into dos, run setup on it. If you don't know how to use DOS, it's not easy.

Create a new folder in a non-system partition (e.g. F drive) and name it win 98

Then:1Insert the boot disk (use the win98 boot disk) to start or restart the computer;

2.To display the options, press the key to select 2 start computer…— Carriage Enter;

3.After a: > type format c: s—press enter;

4.Show proceed with format(y n)—type y, enter the grid;

5.Displays volume label(11 characters......— Carriage Enter;

If the grid d disk, after a: >, type format d:—press enter, execute;

6.After a: > type f:—enter;

7.Type cd win xp after f: >—press enter;

8.After the f: win xp > type setup;

9.Display to Continue, Press Enter......— Carriage Enter;

10.The scandisk ...... is displayedWhen finished, press X to exit and install Win XP;

11.Install motherboard drivers, motherboard applications, graphics drivers, sound card drivers; install peripheral drivers;

12.Install the NIC driver;

13.Install anti-virus software, anti-Trojan software, firewalls;

14.install a network connection;

15.Install the application software;

16.delete individual temporary files;

17.Defragment and ghost the hard disk in safe mode. ok

Documentation is best. If it is a file confirmation, it will definitely start. Cover him up to your c:

Under. This way you can restart the machine and you can enter the DOS. So that you can install it.

Case-by-case analysis. That's all I can say for the time being.

Copy the 98 installation file that it backed up from the machine that uses 98, about 700 megabytes, or copy the ghost file.

If your XP is still there, then go online to DOWN a 98, remember to ask for the serial number.

Use the boot disk to boot into DOS, find the path of 98, and then run setup directly