What should I do if the desktop is not displayed for a long time after booting up, and the desktop t

There are still places where the system files are infected with viruses, so it is recommended to use 360 to disinfect the virus. If it's still slow, then the system will have to be replaced. The antivirus you're talking about is very ineffective.

Use 360 Guard and Antivirus to get your computer right. Uninstall the other antivirus when installing. Some antivirus software uses embedded anti-virus methods, which has a certain effect, but the computer is slow.

Professional, ask for praise.

The desktop is not displayed when the computer is turned on.

If it doesn't come out, bring up the task manager, create a new explorer, and if it doesn't work, you can only redo the system.

Reinstall the system, the antivirus software can't be trusted.

That's a network connection issue, you can just change it to a manual configuration......

Start --- set --- or alert --- taskbar --- notification area--- turn on or off the system icon--- and set the clock to open.

1. Increase physical memory: If it is an XP system, increase it to at least 2G, if it is Win7, increase it to at least 4G or more.

2. Computer optimization and acceleration: 360 security guard can be used to clean up the computer and optimize the acceleration of the computer, and remove all kinds of unnecessary boot auto-start programs and plug-ins.

3. Comprehensive detection and killing of viruses: Viruses and Trojans may also affect the startup speed. You can use 360 Security Guard + 360 Antivirus for comprehensive investigation and killing.

Computer. Computer (computer), commonly known as computer, is an electronic computer used for high-speed calculation, which can perform numerical calculations, logical calculations, and also has the function of storage and memory.

Summary. Hello dear, the computer is turned on normally but the screen only shows the time.

System resolution problem,We only need to raise the resolution to the full screen,First click on the blank space on the desktop and then right-click,Click on the screen resolution setting,Adjust the best resolution of the screen。

Display image ratio issues.

We just need to go to the menu button of the monitor to adjust the image ratio, which is usually 4:3 and 16:9. You can debug up to 16:9.

The computer turns on normally, but the screen only shows the time.

Hello! It's a pleasure to serve you, we have seen your questions and are trying to sort out the information for you, and we will reply to you within five minutes, thank you! ^

Hello dear,The computer is turned on normally but the screen only shows the time system resolution problem,We only need to raise the resolution to a high point to display the full screen,First click on the blank space on the desktop and then right-click,Click on the screen resolution setting,Adjust the best resolution of the screen to display the image ratio problemWe just need to go to the monitor menu button to adjust to the image ratio,Generally, there are 4:3 and 16:9。

You can debug up to 16:9.

Summary. Dear user, Hello, the reason why the computer boots up normally but the screen only shows the time is that there are too many system loading programs Solution: Start --run == input msconfig In the startup item, only let ctfmon tick this item Then apply, restart.

The computer turns on normally, but the screen only shows the time.

Dear user, Hello, the reason why the computer boots up normally but the screen only shows the time is that there are too many system loading programs Solution: Start --run == input msconfig In the startup item, only let ctfmon tick this item Then apply, restart.

I can't log in. There's no ** to see.

What brand of tablet.

Laptop.

think pad

Notebook. New computers.

Only the desktop background is displayed**, the start taskbar is not displayed, and there is no response to mouse clicks and right clicks, like a crash.

That's the way it is.

Yes. Press the "Ctrl+Alt+del" key combination to open the task manager, click the Processes tab to see if there is a process in it, close it if there is, then click "File" "New Task", enter "Explorer" in the open "Create New Task" dialog box, click the "OK" button, wait a while and you will see the desktop icon.

About the problem that after the computer starts, it takes a long time for the desktop to appear. I've come across it too.

Recently, a few computers have been installed, and there is a problem with the boot, and the machine is stuck for half a day when you are welcome to use, and there is no taskbar and icons on the desktop, and you are dizzy for a few days. At first, I thought there was something wrong with the ghost I made. I found a lot of information on the Internet, and I tried them all (such as startup items, network settings, etc.), but the problem is still the same.

Finally, a workaround was found in the Event Viewer. As follows:

Control Panel, Administrative Tools, Event Viewer.

Select System to see if there are any errors or warnings, when the system starts, if there is an error running a service, the system will automatically retry or stop (which is why the system starts up quickly but enters the desktop super slowly). Typical errors occur in the Service Control Manager service.

Solution: Double-click to open the event log of the error, check which service has an error, and go to the service (Control Panel Management Tools Service) to view the relevant dependencies and make a judgment based on your hardware and software. Change the startup type of the service (the error service is generally automatic by default, it is recommended to change it to manual, because the error service may be caused by you installing hardware or software, if you disable it instead, the installed thing will not be usable).

For example, just installed the system and booted into the desktop normally, installed a camera, and restarted the problem of slow entry into the desktop.

Event Viewer (Control Panel Administrative Tools Event Viewer) prompts Windows Image Acquisition (WIA) in Service Control Manager to fail to start, go to Service (Control Panel Administrative Tools Service) to view the service, Windows Image Acquisition (WIA): "Description: Scanners and cameras provide image capture Startup Type:

Automatic" changed the startup type to manual, restarting the machine and the problem was resolved.

When the computer starts, there are many programs running in the background, some of which are system programs that must be run, and some of which are non-system programs that are not required to run. If there are few programs running in the background, then the boot speed will be correspondingly faster; If your computer has enough memory, it will boot up faster.

Therefore, the desktop icon is displayed for a long time after the computer starts, and the processing methods are:

1. Increase physical memory: if it is an XP system, increase it to at least 2G, if it is Win7, increase it to at least 4G or above.

2. Computer optimization and acceleration: 360 security guard can be used to clean up and optimize the computer to remove all kinds of unnecessary boot auto-start programs and plug-ins.

3. Comprehensive detection and killing of viruses: Viruses and Trojans may also affect the startup speed. You can use 360 Security Guard + 360 Antivirus for comprehensive investigation and killing.

The solution to the problem that the desktop icon takes a long time to display after the computer is turned on:

Cause: Enabled by too many startup items.

Optimize the computer: 1. Optimize the startup item;

2. Clean up computer junk;

3. Update patches.

The computer boots up very slowly:

1. There are too many add-ons to boot up.

2. There are too many junk files at the same time.

3. There are too many disk fragments.

Method: Use Security Guard optimization.

My experience is: I use XP, and the antivirus software is Kingsoft Computer Terminal. Recently installed Ali Wangwang,Since then, every time you turn on the desktop icon it takes half a day to come out。 After I uninstalled Ali Wangwang, the problem of rebooting was solved!

1.If the computer is stuck or running slowly or cannot shut down properly or the shutdown is slow or the virtual memory is small, then there is an error in running the software.

Here are some things you can do to speed up your PC as well.

Enter msconfig in the start menu run, remove all (except ctfmon) checkmarks in the startup and try to save and restart (you can speed up the startup), generally you start the run too much, or file conflicts.

Install 360 security guard, boot has been pressing F8 to enter the safe mode to kill, now nine out of ten poisons on the Internet are Trojans, so the antivirus software can not find the virus, it is recommended to install 360 kill.

If there is an error in running the software, please use the above to solve it.

Insufficient virtual memory is generally no remaining space and viruses, please delete useless things to clear the system junk and make the C drive space a little larger.

The poisoning is severe.

Use Windows Cleanup Helper to use it very well.

Isn't some service turned on! Why don't you run msconfig and see, there's a service there, and there's a startup option box, you can take a look.