How can I reset my fiber modem from the new settings after factory reset?

Unplug the fiber and turn off the power. Then press and hold the reset button and turn on the power again, pause for 10 seconds, wait for the red light to change from solid to flashing, and then release the reset button.

1. What you need to note is: After the optical modem is restored to the factory settings, the previous LOID is gone. You will need to re-enter the LOID to register.

The LOID verification code is provided by the operator. Once you're logged in to the home page, select Manual settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type.

In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly. The connection method is always (or automatic.) Model, version may be different) mtu value is 1492.

The save is done.

2. After turning off the power, turn on the power again, set the IP of the computer as, subnet mask, gateway, open the browser and enter to appear the login page, enter the user name root password admin, select Chinese as the language, and log in.

3. Remember not to log in to the modem to change any data, let alone change the password of the broadband account. If you have already restored the factory settings, call the maintenance staff of the broadband operator** directly, and let the other party come to the door to reset it.

If you are unable to operate the Unicom broadband service, you can call the local Unicom customer service to report the problem, and the customer service will guide you to set it up or arrange your local installation and maintenance personnel to assist in handling it.

"What should I do if I can't connect to the network after the fiber modem is restored to factory settings? "Recently, many netizens have asked such questions. When the router encounters a problem, the router is restored to factory settings and the fiber modem is also restored to factory settings, and then the router cannot be connected to the network after setting, asking what is going on?

Restore the fiber modem to factory settings, this practice is actually 10,000 should not be, because when our broadband is installed, the fiber modem generally has to write the interface data, and the broadband installer will write the data well. If the factory settings are restored, the interface data written to the cat will be cleared, and the broadband will naturally be unable to use the Internet.

Solution: Call the broadband operator**, and ask the broadband installer to set the interface data of the fiber modem again.

Once the modem is restored to factory settings, it will not be able to access the Internet and will need to be re-registered. Here's how:

1. First of all, set the gateway for local connection to be the same as the gateway of the modem, the IP address is within the IP range of the modem, and the DHCP function is enabled by default for the modem, and the computer will automatically obtain it. Then enter 19216811 in your browser to enable the local connection.

2. After entering the interface, enter the super administrator username and password, if it is a change of cat, please **customer service No. 10000, let the staff of the data class help you unbind the original lot optical modem, otherwise you can't open it if you set it**, 3, and then go in to open the router, turn on the wireless, select the network in the optical modem interface, select the broadband setting, select the 41 line, after the option appears, click on the option of 46, and see if the network detects the public network after the setting is successful.

4. Set the **number, select the broadband ** setting of the application, and select the basic setting of the broadband**.

5. Complete the setup and registration.

The cat replied that the factory needs to be re-registered, in order to send broadband data, to register, you must know the LOID number.

Steps: 1. Enter the modem to enter the modem login page.

2. Click Device Registration.

3. Enter the loid. The prompt is successful and the delivery is complete. The LOID number needs to be checked by the maintenance personnel. Every broadband LOID is different.

Generally, the broadband installation is, the technician will help you set the broadband password on the optical modem, and you can use it directly by connecting to the router and setting the wifi password. Now the optical modem has restored its factory value,If you have a broadband password,You can also go to the optical modem to set it,The address is generally:

The optical modem generally can't restore the factory value, this thing doesn't need to be set, it's directly the transmission device, so if something goes wrong, it's not necessarily a problem with the optical modem.

Optical modem, the scientific name is modem, it is given by the operator, it is the first device after fiber to the home, on the back of the device, there is a login method (username and password), you can reset it. If not, you can call the operator's customer service, and they will come to the door.

The easiest way is to apply for repair, if you are in a hurry and understand some network setting knowledge, you can ask the network service company for broadband and password, and set it yourself.

There is no way to use this, you can only find a professional person, to set it up, you directly call ** to report for repair, just say that the computer can not be connected to the Internet, let them send someone to repair, it's OK.

The optical modem is restored to factory settings, and the staff of the network operator are required to provide on-site service, because there are some parameters that we personally do not know. Hit your network operator's service** now.

Unplug the fiber and turn off the power. Then press and hold the reset button and then turn on the power Labrother skin, pause for 10 seconds and then release the reset button after the red light changes from solid to flashing, this can make the light cat return to the setting, be cautious with the wheel difference.

Device: China Unicom optical modem all-in-one machine.

Operating Equipment: Dell Computer.

Operating system: win10

Software: Browser.

1. Open the browser and enter the enter enter to enter the routing login interface;

2. After logging in, various setting options will appear.

3. Check the setting items of each wide stove: in the status, you can see whether the Unicom network you are connected to now is registered, and you can surf the Internet normally.

Four liquid oranges, Internet settings: Enter the Internet access password here.

5. Optical modem router wireless name setting: SSID name, here is the wireless name used, change it to your favorite name.

6. Optical modem routing wireless password setting: WPA pre-shared key, set up wireless Internet access password carefully.

7. Password setting for logging in to Unicom Optical Modem: user name.

It cannot be changed, and the password can be changed to make it easier for you to log in next time.

The light modem restores the factory setting beam.

The steps are as follows:

1. Unplug the broadband and turn off the power;

2. Press and hold the reset button, that is, the resset button, then turn on the power of the optical modem, wait for 10 seconds, and release the reset button after the red light changes from solid to flashing.

3. Wait for a minute to shout the bell and then turn off the power, and then turn on the power.

Factory resetMethods such as under the shed:

1. Manually reset and press and hold the light cat with a toothpick.

The rest key can be used later.

2. Use the password to reset, first of all, the lead cover will power on the optical cat, connect it to the computer, or use the mobile phone to connect the optical cat to wireless wild trouble.

3. Enter the registered address of the modem in the address bar.

4. Click Device Registration, and then the device will show that it has been registered.

5. Click below to restore factory settings, and then enter the password scdx189, and then the modem will automatically restore the factory settings.