I want to buy NOKIA3250, please help my friends with my staff, how about this machine? 5

2: The maximum supported capacity of the card expansion is 1GB;

3: Provide support for many audio formats;

4: 270 degree waist rotation design camera.

Shortcoming. 1: The screen display effect is average;

2: The design of TF card slot is not user-friendly enough;

3: The design of the rotary keyboard may affect the lifespan;

4: Lack of software game support.

Use the **** (support *** eaac+ format) to manage ** and ** lists, control ** through a dedicated ** key; Copy the CD** tracks from the PC via Nokia ** Administrator, Windows Media Player (Windows****); Enhanced** features: Sound Check (equalizer, stereo boost, reverb, bass boost); Supported formats: EAAC

Main camera: 2 million pixel CMOS sensor, 4x digital zoom.

**Resolution: Supports up to 1600 x 1200 resolution.

Burst support. Time-lapse: Yes.

**Quality: A variety of **quality options.

**Resolution: 176 x 144 or 128 x 96 pixels (QCIF or SubQCIF), 15 frames per second; Up to 10 minutes of clips can be recorded (internal memory only, memory card not included), viewing, video streaming.

Specifications: Rotatable camera; **Maximum support 1600 1200 resolution; Support continuous shooting and timed shooting; Support night shooting, contrast brightness adjustment, rotate the disk to 90 degrees and automatically start the shooting mode; A variety of ** quality options.

Standard Configuration: Lithium battery (BP-6M1100mAh), charger, **Earphone HS-20, 512MB MicroSD card and adapter, data cable CA-53, CD-ROM (including Nokia PC kit), User Manual, Quick Start, product brochure.

There are two ways to do it:

1. Soft grid: Enter on your mobile phone.

After asking you to enter the lock code, the initial password is: 12345, if you have changed the phone password, that is the changed password (not the SIM card password), after which a white screen appears, only the word nokia is displayed, 2 3 minutes after the grid is completed, re-enter the time.

2. Hard grid: turn off the computer first, press and hold the dial key, "* key, and "3" key when turning on the computer, and turn on the power until the word "nokia" appears (no button can be released during this process). Wait a few seconds until "formatting...... appearswords, then you can release the above buttons.

After a few minutes, the system format is completed, and the phone automatically restarts and enters the standby screen.

The above grid machine needs to pay attention: keep the power absolutely sufficient, do not try to shut down the grid on the way, can not plug in the charger, etc. Generally, soft grid is preferred. (Remember to back up the data you want before the machine).

In the case of normal standby! Press * and you're good to go!

But before you check your phone, make a backup of your important stuff on your computer!

For example, business cards and the like! Your phone may prompt you to enter your phone lock code!

If you have changed the lock code, enter the password you have set!

If you haven't reset your password! Enter the default password for the exit and you're good to go!

1. Carefully check whether there are any imprints in the screen, and whether there is dust in the data cable, headphone jack, speaker hole, and hanging tape hole.

2. Carefully look at the battery lock of the fuselage to see if there are scratch marks, see if the gap between the seams of the shell is uniform, whether there are pry marks, and whether there are pick marks at the two sealing points under the screen in the upper cover.

3. Carefully check the SIM card contact points and whether there are wear marks on the contact points of the fuselage battery (these two contacts JS generally cannot be replaced.) If it is a refurbished machine, then there will definitely be clear friction marks on the contacts of the SIM card chip, which will look shiny, which is caused by too much friction. If it is an unused chip for a new machine, the contact surface should be frosted).

4. Generally look at the other mouth of the screw, whether it has been twisted (this point is quite a personal touch).

The last time I went to a store, I wanted to see if there was an e398, but the boss first said no, then said yes, and turned around and got one inside. When I looked at the screw, one of them was twisted into a circle, and the others were all crossroads! Sweat!

5. Use your nose to smell whether there is any pine fragrance (not the sandalwood fragrance of the new machine), because the repaired machines have a pine fragrance.

6. Carefully check whether there are any records in the WAP and voice functions and call log information functions.

7. Look at the two rubber pads under the inner screen for picks.

8.Call quality. Bring your own SIM card to test the machine, call**to your friend, it is best to fix**, ask the other party how the call quality is, whether the call sound is clear, whether there is noise, current sound, whether the volume has dropped suddenly.

Finally, of course, it is to ask for three bags and bring all the formalities. When you get home, you should "bake" it first.

If there is a problem, change it immediately (although everyone on earth knows it, it's still nonsense).