Questions about the upgrade of Yingtai 690G motherboard!

1Gx2 dual channel is better for G, 2Gx2 dual channel is better for 4G; But now a single 2G is not expensive, so buy a single 2G to facilitate upgrading to 4G in the future

g motherboard, once a discrete graphics card is plugged in, it will automatically shield the original integrated x1250; Within 500, you can choose a Pro card.,But it's recommended that you get on a better point.,Because you play games as the main thing.,Now buy a card to buy sapphire hd3850 overseas version is better.,N card directly on 9600gt; But it's all out of your budget, so you add 100 yuan, consider the 8600GTS of Yingla, the high-frequency, and now it's only selling for 600 yuan!

If you don't mind, I'll sell you my Sapphire HD2600PRO directly.

I bought it for 699 at the time, and now it's 200 yuan**. Huh

I'm in a similar situation to you, and now I want to upgrade and study all the knowledge in this area.

1. Now ordinary users are using a 32-bit operating system, adding more than 2G memory will greatly reduce the efficiency of memory usage, it is recommended that 2G is OK.

2. In the case of not considering future upgrades, it is better to use the 1g*2 dual-channel method.

3. Because my machine is about the same configuration as yours, I know your machine well.

With dual channels, the 667 memory is already very good (for the system, the amount of data generated is already too much), so it is not recommended to use the popular 800 to build dual channels.

AMD 4000+, it is not recommended to use HD4830 or higher graphics cards, I think it is best to use HD4830.

Onda's 800SP HD4830 You can consider, and of course Dilan Hengjin's HD4830 is also good.

Dilan Hengjin 4670 490 yuan.

Dilan Hengjin 3850 495 yuan.

Dilan Hengjin 4830 680 yuan.

These three are the best price-performance 4830.

Yingchi 9600GT enhanced version 599 yuan.

Sapphire HD3870 512M Overseas Edition 599 Yuan.

Whatever you like.

Do I have to restart my computer for the settings to take effect?!

It is recommended to try it!!

If you really can't do it, turn off the speakers!

The CPU is relatively low, and the graphics card will be very stuck, please change the CPU by the way, your highest is the last AMD5000 or 5200. Then add a graphics card, this configuration is on the line with GT240, no matter how high it is, remember to ask for about 500, if the merchant recommends a cheap one to you, it is imbecile, the performance is not good, don't be greedy for cheap.

It's a good motherboard, but it's really old.

If you don't change the motherboard, you can't change the CPU, and the performance won't improve much.

If the CPU can't keep up, then no matter how good the graphics card is, it's a waste, because the CPU drags down.

In addition, if the motherboard is not replaced, the memory can only continue to use DDR2, and DDR3 can no longer be used.

In this way, there is basically nothing that can be improved on the whole machine.

On the whole, your whole set of machines is balanced and powerful.

Balanced means that no matter which accessory you enhance, it will actually play a smaller role in improving performance.

Cask theory, you know.

How much water can be filled in a barrel depends on the shortest board.

For a good barrel, there is no shortcoming, in fact, to strengthen, only full replacement.

Well, having said that, I'm talking about it.

Your whole set of machines is worthless, and the whole set of hosts is not much money to sell.

And you want to spend 800 to improve.

With 800 yuan, you can buy a set of second-hand machines with four cores. **Lot.

I think your best bet is to sell the whole machine and buy a brand new one.

The speed is definitely several times faster than your +800 yuan improved machine!

I'll help you configure it, as follows: Accessory Name Quantity **.

CPU AMD Athlon™ II Quad Core 760K Boxed CPU (Socket FM2 1

Motherboard Gigabyte F2A75M-D3H Motherboard (AMD A75 Socket FM2) 1

Graphics: Onda HD7770 Aegis 1GD5 950 4200MHz 1G 128bit DDR5 graphics card 1

Memory: Apacer Classic DDR3 1600 4G Desktop RAM 1

HDD Seagate 1TB ST1000DM003 7200 rpm 64M SATA 6GB SES Desktop HDD 1

Chassis: SAMA Miracle 3 Mid-Tower Chassis (front blackened, iron mesh dustproof, SSD supported), black 1

Power Supply: Delta Rated 350W NX350 Power Supply (80PLUS Bronze 12cm Temperature Control Silent Fan Support Backline) 1

7 products

45nm Athlon X2 5000 processor Buy a package to open the quad-core, which is the highest performance CPU that this motherboard can support...

If you have a budget of 800 yuan, add 2G memory first, 2GDDR800, about 150 or so, and the remaining 650 can add a mid-range graphics card, such as GTX650, HD7750 core, although your motherboard can not fully play the performance of this grade graphics card, but like your 1T hard disk, you can still use it for a new machine in the future. If you want to save 300-400+, you can use it first, such as GT610, GT630, HD6574, etc. Most online games and single-player games should be fine.

It's not interesting to upgrade, 800 yuan can go to the second-hand forum to shop!

It doesn't mean much to speed up.

It is advisable to give up**.

The master pack contains a disc that contains all the drivers for your master board.

Find HD4870 or 9800GT, you can form a 3A platform with HD, but HD's support for drawing is not very good, INVISTA's 9800GT series is better for drawing, but it doesn't match your motherboard CPU very well, plug-ins, some matches are not too good. If a higher graphics card is not necessary, it will not match your other configurations.

You can check the specific details according to these models. I won't go into details.

ls...Even if it's a fallacy. It's not that n is better than a for plotting.

If it's a 2D drawing, you don't need to add it.

3D diagram words. Actually, it's okay not to add it. Add 4670 is enough.

Choose the first one on the right in the BIOS, don't change anything after you go in, see the rated frequency of the CPU 200MHz, just change 200 to 240, 99% success (don't change it high, I tried, the external frequency is not very stable if it exceeds 240MHz).

My motherboard is also Yingtai's, the model is NF520-A2, so the settings should be about the same, if you don't know clearly, look at the motherboard manual, it will tell you where to change the external frequency.

The multiplier can go up to the external frequency of about 300, my motherboard is relatively bad to go up to 280, to 242 the main frequency is 2300, it is already quite 4400, each motherboard is different, you look at the manual, the option default is 200MHz is the external frequency super to 250 after 10, 10 to add up, can start normally without crashing.

You don't need to upgrade this board is not bad for overclocking You can overclock it, it's not enough to use 4000+ What do you think the CPU is low? I don't think you can change it for 5200+ spend 400 to burn the bun.

If it's not enough to play games, it's a graphics card problem, you plug in an independent piece to ensure that the current CPU is very powerful, and the game mainly eats the graphics card, especially in the case of high-resolution special effects.

I recommend a graphics card to you.

Onda HD4830 512MB Shenge This is very good It is 800SP In fact, it is equivalent to 4850 **It is also very good Less than 600 It is a high-end graphics card that is very valuable in the near future.

Your motherboard supports up to AM2 processors;

But I think you don't have to change the processor, the bottleneck is in the graphics card, just change it to HD4650, about 400 yuan, with your computer is quite suitable and all parts can play a performance.

Directly change to AMD

Athlon 64x26400+, **should be at 300, I changed this, 200 yuan to buy a friend's.