-
Anonymous users2024-02-08If you use it alone, it basically doesn't make a difference, because it depends on the transfer speed of your connection to the upper level, but if you use it with multiple people, you can use a gigabit network card faster than everyone else's.
-
Anonymous users2024-02-07The peak transfer speed of the Gigabit network card is 1000MB s to 125MB s
The peak transfer speed of 100 Gigabit network cards is 100 MB s
The difference between them is that the maximum theoretical transmission speed is not passable, but the specific network speed depends on the upper speed of your connection, if it is within 100M, there is no difference between these two network cards.
-
Anonymous users2024-02-06It's just that the line capacity is larger. For example, if you can eat 2 steamed buns, you can use a small plate, even if you take a pot, you can still only eat 2 steamed buns. The amount of your meal does not depend on the size of the container. Hehe.
-
Anonymous users2024-02-05I haven't heard of anyone who has hundreds of megabit networks at home.
As long as it's up to 100 trillion, it's the same.
-
Anonymous users2024-02-04No. Gigabit and 100 Gigabit describe the range of bandwidth that the network card can adapt to, and it has nothing to do with speed.
-
Anonymous users2024-02-03Ha ha!!! This is a misunderstanding!! What to say 10-100m 100-1000m haha he just plays a supporting role!! What does compatibility do!! The most important thing is that you are online!!
-
Anonymous users2024-02-02Not necessarily, depending on your network.
-
Anonymous users2024-02-01It depends on your broadband bandwidth.
-
Anonymous users2024-01-31It is estimated that your home is only 2m at the earliest, and a 10m network card is OK
-
Anonymous users2024-01-301.Define the difference.
Gigabit network means 1000mb s, Chinese called 1000 megabit seconds; The meaning of 100 megabit network is 100 mb s, which is called 100 megabit seconds in Chinese.
2.Displays the speed difference.
Gigabit Ethernet speed display is 1GB; The speed of 100 Gigabit is displayed as 100MB.
3.Network cable differences.
100 Gigabit network cable is Category 5 line and super Category 5 line; The gigabit network cable mainly refers to the six types of lines and super six types of cables.
4.The principle of application is different.
If all network equipment, network cables, and network cards are gigabit, then the entire LAN is gigabit; If there is a place of 100 Gigabits, then the transmission rate of the devices below this 100 Gigabit interface will be reduced to 100 Gigabits.
-
Anonymous users2024-01-29It does not mean that the network card is gigabit, its actual working bandwidth must be gigabit. Because the network card is always connected to the switch and router through the network cable, if the interface bandwidth of the switch or router is only 100 Gigabit, then the Gigabit network card can only reduce its price to adapt to the 100 Gigabit switch.
In addition, the network card does not work in gigabit mode, only recognizes 100 gigabit, there are the following reasons:
1. The quality of the network cable is not up to par, although it is a Class 6 line, the distance is attenuated when the distance is long.
2. The network cable is not connected. When the crystal head was not played, the contact was poor, the 8 line sequences were not all right, and only four were required to be connected to the 100 megabytes.
3. NIC driver and settings. The driver is wrong or not fully compatible with Gigabit. Or the NIC working mode is not automatic, but set to 100 Gigabit mode.
4. Optical modem port limit. After the operator restricts, only the 100 megabit mode is recognized.
-
Anonymous users2024-01-28The unit of 100m is bps (bits per second).
100 Gigabit NIC is a type of network bandwidth, which refers to 100 Gigabit optical fiber. The theoretical transmission speed of an ordinary 100 Gigabit network card is 100Mbps, and the actual conversion limit is the fastest speed. The unit of 100M is bps (bits per second), and this bit is the bit.
-
Anonymous users2024-01-27Gigabit LAN cards are 10 times faster than 100 Gigabit LAN cards, but the specific bandwidth of your home prevails.
-
Anonymous users2024-01-26The transmission rate of the gigabit network card is 1000mbps (gigabit), and the transmission rate of the gigabit network card (ordinary network card) is 100mbps (100 megabit), the biggest difference between the gigabit network card and the general network card is that the transmission rate of its network port is 1000mbps (gigabit), which is ten times the transmission rate of the 100 gigabit network card.
The packet loss rate of 100 Gigabit network cards is higher than that of Ethernet.
In layman's terms, the maximum bandwidth supported is different. The Gigabit NIC supports a maximum gigabit bandwidth, and the 100 Gigabit NIC supports a maximum bandwidth of 100 Gigabits.
They have different fields of application, and it is impossible to simply say whether they are good or bad. Because cost-effectiveness has to be combined with applicability.
Generally, families use broadband Internet access to choose 100 Gigabit network cards.
The network card is the bridge between the computer and the network. Computer data is translated through a network card and then transmitted to other destinations through the network.
Determine Gigabit LAN and 100 Gigabit LAN cards:
The appearance is different. If it is a stand-alone NIC, the visible NIC socket panel generally has a working indicator. The Gigabit network card generally has two indicator lights, and the Gigabit network card generally has four indicators, which are the working indicators.
Gigabit LAN is a 32-bit PCI bus interface standard 10 100 1000MB S Gigabit network card, which meets the 10Base-T, 100Base-TX, and 1000Base-T network standards. It supports 32-bit PCI data bus, which does not need to occupy CPU time to transmit data, and can directly exchange data with memory without using the CPU, thereby reducing the load on the host. RJ-45 interface is used to access with twisted pair cable to achieve convenient, fast, simple and reliable connection.
Since the implementation of the Gigabit Ethernet physical layer is different from that of 10m and 100m, the twisted pair used needs to connect all four pairs of wires. Category 5e wires are required to make cables.
Software Judgment. In fact, judging the gigabit network card and the 100 gigabit network card is very simple, and you can use software to detect it, such as Master Lu.
Judging by the speed of the local connection.
In addition, you can judge from the speed of your local connection. As shown in the figure below:
Look at the light cat. There are two ways to do it, one is to look at the mark next to the network interface of the optical modem; One is to check the optical modem manual. Let's talk about each of them separately. >>>More
With the change of society, we are in the era of science and technology, and people's lives are covered with wireless, data, and broadband, and our lives are inseparable from these. >>>More
Today's network cards are generally adaptive to 10-100M, so the difference is generally not big. But if you want to buy it, you have to buy a good quality one.
The signal received by the wireless network card is weak, first, the quality of the network card itself is not up to standard; second, it has to do with the surrounding environment; Third, the signal source is not within the range of the wireless network card! According to your description, the laptop can receive 4 grid signals, but the wireless network card can only receive the grid, which can only indicate that the wireless network card itself has poor ability to search and gather signals ......Solution: 1. Change the wireless network card; 2. Try a signal booster!! >>>More
Hello, first of all, thank you for your support to China Telecom. According to your description, no, if you need to use the wireless network card of Telecom, you need your mobile phone to support the OTG function on your telecom mobile phone, and the network speed is the same as your telecom mobile phone card, which uses the 3G network of Telecom. >>>More