Why can t I read the disk from the CD drive???

When the disc drive is read, the disc is running at high speed, the laser head is very close to the disc surface, if the disc is suddenly forcibly ejected, it will cause damage to the laser head, if you don't guess wrong, the landlord must have won the lottery, and the laser head damage means that the optical drive is basically finished.

But now the optical drive is cheap to death.,***-ROM is only about 180,***-RW is only 350,CDROM should also be at the end of its life.,The old ones don't go.,The new ones don't come.,Hehe.。

Try to see the other CDs, if the others read properly. That's just a matter of individual CD drives. Otherwise, it's likely to be broken.

How long does your CD drive last? Today's electronic products have a lifespan, only 2-3 years.

Optical drives don't usually break so easily, and I do that I do that a lot of time.

I suggest you try a different disc.

If it is broken in and out of the warehouse, repair it, if it is a bald head, there is no need to repair it, replace it!

If you don't read a disc, it's either a disc or an optical drive. After changing the disc, remove the optical drive and take turns to try, you can rule out what the cause is!

Disassemble the optical drive and wipe the bald head with alcohol! Look at the drive belt that hasn't been broken!

The optical drive is generally used for about a year

Replace it directly, it's not worth repairing It's not guaranteed how long it will last

The tips for fixing a CD player not reading a disc are: clean the disc and head, check the power supply and cables, and adjust the reading position of the CD player.

1. Clean the disc and bald head: The reason why the CD player does not read the disc may be that the disc or bald head is dirty, it is recommended to use a professional disc cleaner and a bald head cleaning stick to clean the disc and bald head, and then reinsert the disc to see if it can be read.

2. Check the power supply and wires: if the CD player does not read the disc, there may be a problem with the power supply or wires, check whether the power plug is plugged in tightly, whether the wires are damaged or in poor contact, if so, replace the wires in time.

3. Adjust the reading position of the CD player: the incorrect reading position of the CD player will also lead to the situation that the disk is not read, at this time, you need to adjust the reading position of the CD player, the specific method is to open the CD player, find the adjustment screw of the reading position, and gradually adjust it to the position that can read the disk normally.

Reasons for CD player jamming

The bald head is the key to the CD player to read the CD, if there is a problem with the bald head, it will cause the CD player to be unable to read the CD normally, thus jamming the disc. In this case, we can try to clean the bald head with a bald head cleaning tablet, or send it to a professional repair shop for overhaul.

A CD machine reading system consists of many parts, and if any one of them fails, the CD player will not be able to read the CD properly, and the disc will be jammed. In this case, we need to send the CD player to a professional repair shop for overhaul.

If the disc is of poor quality, there are scratches or stains on the surface, which will cause the CD player to fail to read the CD normally, and the disc will be jammed. In this case, we can try to use a cleaning disc or replace it with a new disc to solve the problem.

CDs and CDs are two different discs, and they differ in their physical structure and storage capacity. As a result, most modern computers and optical drives have the ability to read both disc types.

Driver shields are usually backward compatible, which means they can read and cd and ***. This is because the laser head of the drive can adapt to different disc types and operate and read accordingly as needed.

When you insert the CD into the *** drive, the drive reads it with the appropriate laser power and frequency to read the data on the CD. The basic difference between cd and *** is the storage density of the data, *** has a higher memory capacity and a finer pulse length, so it requires higher laser power for reading. The drive has the ability to accommodate this difference in order to handle both CD and *** read needs.

If the panel light is on and there is no abnormal sound, then open the shell and put it into the disc after powering on, observe the working condition of the leading motor, if the leading motor has no action, it is necessary to check whether the power supply of the leading motor is normal, whether the transmission belt of the motor is slippery and broken. Whether the status switch is switched freely, because if the switch is not in place, the leading motor cannot be started without a starting signal. To determine whether the optical drive is faulty in the circuit, or the laser head is faulty, you can put in a genuine CD, and the following actions should occur:

1. The laser emitting tube is on (red), and the indicator light on the optical drive panel is on;

2. The laser head frame has a re-assignment defense action (back to the vicinity of the spindle motor);

3. The laser head steps from the inner ring of the disc to the outer ring for retrieval, and then returns to the vicinity of the spindle motor;