When my car brakes, the steering wheel can t rotate, what s going on, it affects my novice parking?

It is because you turn off the engine and then pull the steering wheel, causing the steering wheel to lock, at this time insert the key to open, and then pull the steering wheel and then ignite, if it still doesn't work, try the opposite direction.

1. Explanation of steering wheel: a wheel-shaped device for controlling the direction of travel of automobiles, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft.

2. The role of the steering wheel: the original car was controlled by the rudder. The violent vibrations generated by the car while driving are transmitted to the driver, making it more difficult for them to control the direction.

When the engine was relocated to the front of the car, the driver could no longer use the rudder to drive the car due to the increased weight. The result is a new design of the steering wheel, which introduces a gear system between the driver and the wheels that is flexible and insulates from the harsh vibrations of the road. Not only that, but a good steering wheel system also gives the driver a sense of intimacy with the road.

Hope, thank you.

Hello, I come to your problem, this fault is more complicated, it is recommended that you go to the nearest 4S shop, let the professional staff diagnose you, the fault of the car is not a trivial matter, and I hope you pay more attention to it, all the way safe.

Probably you, probably because your steering wheel is too stiff, you should loosen the screws or add some oil.

The brakes become heavier, the steering wheel can't turn, and the three modes of sports mode, in addition to the change in throttle response, even if the speed does not rise, the weight of the steering wheel will change, and the sports mode is the heaviest;

Hello, the current number of people consulted may not reply in a timely manner, if it is a vehicle failure problem, it is recommended to use the computer to detect the specific cause of the failure, search for "car master" can consult car problems at any time, 24 hours ** answer.

If it is after starting the car,Steering wheelIt doesn't move, probablyDirection machineThe booster pump is broken, and in this case, you have to go to the repair shop for inspection and repair. If it is in the state of flame-off, the steering wheel does not rotate, generally the automatic anti-theft function of the steering wheel is activated, and the steering wheel is locked, and the steering wheel can be lifted by turning the steering wheel back and forth and then opening the ignition key.

In general, the steering wheel automatically locks when the engine is turned off, which is a simple anti-theft function. This situation is not encountered every time the ignition is encountered, and the steering wheel is naturally unlocked after starting the vehicle with the key.

Precautions for car brakes.

Under the normal driving conditions of the car, every 5000 kilometers of the brake shoe is inspected, not only to check the remaining thickness, but also to check the state of the shoe wear, whether the degree of wear on both sides is the same, whether the return position is free, etc., and the abnormal situation must be dealt with immediately.

Car brake pads.

When replacing, replace the brake pads provided by the original spare parts, only in this way can the brake pads and brake discs be made.

The braking effect is best and the wear is minimal.

It could be a mechanical injury, or the engine temperature is too high. It is normal for the brake to not be pressed, because the car brakes in the starting state, and the power comes from the formation of a low-pressure area when the engine takes in, and there is a vacuum pump in front of the brake pump, and the low-pressure area formed is in this pump, and the vacuum pump can help you brake when you brake, but there is no low-pressure area when the engine is turned off, and there is no power assist, so it naturally cannot be stepped on. The steering wheel is because of the power assist, as soon as the engine turns off, there is no power assist, and most of the current cars have an anti-theft function, and when the steering wheel turns to a certain angle when the engine is turned off, it will be stuck until the next start.

The latter two are normal, as for the first one, I think it is better to go to the 4S store if you have the conditions.

Check the directional boost oil to see if there is less oil.

According to this situation, it can be roughly judged that the internal leakage of the direction booster pump is too large, and the engine speed is higher when the car is driving normally, which can basically offset the internal leakage of the booster pump, so it does not feel that the direction is heavy when driving. However, when you step on the brakes, the engine speed drops suddenly, and the pressure generated by the booster pump is not enough to drive the steering cylinder due to the large leakage in the booster pump, so the direction will not move or it will be very heavy.

Changing the direction when braking is a protection to prevent the vehicle from losing control and flicking its tail!

First of all, what kind of car is yours?

Reasons why the steering wheel is locked and the brakes can't be stepped on and how to solve it:

1. Direct method: pull the steering wheel a little hard in the direction of returning to the right and hold it, press the brake hard (because the lock is very hard, in fact, you can't step on it), press the key to start, and it's OK;

2. The steering wheel of the one-button start model is automatically locked, in this case, you close the door and re-unlock it to try again. If there is no power to change the battery, you try to put the remote control near the one-button start or under the wiper switch lever and press the one-button start, it seems that it can start;

3. The reason for the steering wheel locking: The main reason for the steering wheel locking is: the steering wheel did not return to its position when it was parked last time, which caused the steering wheel to be abnormally locked.

4.The car battery is dead, in this case, you also follow the method one, after inserting the key, twist to the battery switch, observe whether the driving display behind your steering wheel is energized, if you can't judge, turn on your lights to confirm again, the lights are not on to confirm that the battery is dead. At this time, you need to assist in taking electricity or replacing the battery, you can call your insurance company to rescue**, let him provide electric rescue, usually in the urban and county seats, are free;

Solution: 1. Pay attention to daily car habits, and return the steering wheel to the right when parking. 2. Try to install and install spare parts, such as adding audio, electric massage cushions, modifying hollow LED screens, etc., so as not to increase the power consumption of the car, accelerate the burden of the battery, and greatly reduce the battery life and storage capacity.

3. Pay attention to the switch of the air conditioning compressor, the compressor is used more in summer, remember to turn it off after stopping, turn it on after starting the car, and control the voltage reasonably. 4. Pay attention to the battery inspection regularly during vehicle maintenance.

You have used up some of the hydraulic power reserved in the vehicle, and of course you can't step on it. As long as you turn the key to the power-on position, you don't need to light it. Wait a while, and the brakes will be activated. Then just hit the brakes and ignite.

The solution to the steering wheel locking and the brakes not moving:1. You have used up some of the hydraulic power reserved in the vehicle, and of course you can't step on it. As long as you turn the key to the power-on position, you don't need to light it.

Wait a while, and the brakes will be activated. Then just hit the brakes and ignite.

2. That is, to remind everyone that if the engine stalls for no reason during driving, everyone should pay attention to the chance that you step on the brakes once or twice;

3. Pull the handbrake in time, turn on the emergency lights, and inform the rear vehicle that there is a problem with your vehicle. Then turn off the ignition, return to P gear, twist the steering wheel slightly, bring the steering wheel back to the center, and then restart it so that it can be restarted and the steering wheel is unlocked.

The reason for the locked steering wheel is a very basic anti-theft feature of the car. The principle is that through the rotation of the key, a steel pin is controlled by a spring, and when the key is pulled out, as long as the steering wheel rotates, the steel pin will bounce into the hole left in advance, and then jam the steering wheel to ensure that you can't rotate. In the case of a locked steering wheel, the steering wheel will not turn.

What else can be done? Why don't you go to the nearest repair?

Same as ordinary, different from other things, adjective. Rare; Strange; Weird. Basic information is different from the same kind of thing or ordinary situation.

In this case, it means that your steering wheel is locked, and after the key is inserted, turn it in the normal direction of ignition, do not turn it to the end, gently turn to the battery switch, so that the steering wheel will be fine. Then step on the brakes and ignite, remember to turn the parking steering wheel back to the right in the future.

When you get out of the car, you pull out the key and turn the steering wheel again, and the car automatically locks the steering wheel. So don't step on the brakes when starting, turn the steering wheel left and right, then press the brakes, and press the keyless start to unlock it.

When the steering wheel is locked, don't step on the brakes first, turn the steering wheel left and right, then step on the brakes, and press the keyless start to complete.

The steering wheel of the car is locked, and you have to twist the key door first.

After the car is parked, it turns the steering wheel, it doesn't turn, and it can't start when it is restarted, why.

Hello! After the car is parked, turn the steering wheel, it can't turn, and it can't start when it restartsSun Xing: After parking and pulling out the key, if you turn the square volt crack disc, the steering lock and steering column will automatically buckle together in the lack of Kai closed, so as to lock the steering wheel, then you can no longer turn it, playing the role of anti-theft.

Second, the solution for the key to start the car: the method is very simple, is to first insert the key into the keyhole, and then shake the steering wheel while twisting the key, until the key can be turned, the steering wheel is also unlocked! For push-button start cars:

Don't step on the brakes, gently press the power-on, shake the steering wheel left and right, step on the brakes, and press the start button again, and the ignition is successful.

Summary. The steering wheel does not rotate when the brakes are applied, which is normal. Because in the process of stepping on the brakes, the 4 wheels of the vehicle will be bringed, the braking resistance is relatively large, and the yield of his suspension is also relatively large, so it will feel that the direction of turning is more difficult, and it feels a little heavier, this is a normal phenomenon, this is the case with every car, and it can be used normally.

When my car brakes, the steering wheel can't rotate, what's going on, it affects my novice parking?

Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

This is a normal phenomenon when the steering wheel does not turn when the brakes are struck. Because in the process of stepping on the brakes, the 4 wheels of the vehicle will be brought, the braking resistance is relatively large, and the yield of his suspension is also relatively large, so it will feel that the direction of turning is more difficult, and a little cautious feeling is heavier than the positive tremor, this is a normal phenomenon, this is like this for every car, and it can be used normally.

Check whether the contact surface between the brake pads and the brake disc is flat, it is likely that the brake steering wheel shakes caused by this fault. There are many reasons:1inconsistent tire pressure;

2.The brake pump is not working properly;

3.The most important point; The dynamic balance of the tires is not good, especially the front wheels (do a four-wheel alignment).

If it is at high speed (more than 80 miles) It is normal to have a slight vibration when stepping on the brake steering wheel, because there is the influence of the drag coefficient of the road surface and the deceleration of the body. But usually in about 60 miles slowly step on the brake pedal, first from the pedal to the jitter, as the pedal aggravates the steering wheel also begins to swing, it is necessary to measure the amount of brake disc jump, if the edge of the disc jumps large, but the flange runout is normal, then you have to replace the brake disc on it.

If the runout of the flange is too large, then the elevation bearing, flange and brake disc need to be replaced together. Because the brake disc at this time will also be worn and deformed. If the front of the car is shaking when braking, it is necessary to check whether there is any space for the ball head of the directional dry pull and the ball head of the lower arm.

When you step on the brakes, the steering wheel swings left and right is caused by the deformation of the brake disc, and the brake disc needs to be replaced, and the brake disc can also be milled flat, but if it is too thin, it is easy to step on the brake disc. It's better to change it, if it's a slight shake when parking.

The brake disc or the surface layer of the brake disc is unbalanced or deformed, and there are too many gaps between the brake disc and the automobile brake pad, which causes problems in the steering system and the data of the four-wheel alignment.

There was a problem with the brakes on one side.

You can check the brake discs and pads on both sides of the front wheel and the rubber sleeve underneath. See if there is a gap and if it is too large. Thank you.

When the car brakes, the steering wheel rotates, indicating that the brakes are offset.

This phenomenon is an imbalance in the front brakes, and it really helps you look forward to it