Only one person can access the Internet with a router. How to reset routing

1. Connect the network cable (both use a direct connection), and the incoming cat router routes two computers. (Note that the cat router is connected to the WAN port, and the router LAN port is connected to the computer).

2. Enter your land tour. (Take a look at the manual, what is the IP address, username and password of Lu You.) If the manual is gone, check it on the Internet.

For example, the IP of my unit's land tour is Then I enter it in the address bar of IE and then press enter, and the login dialog box will appear, and you can enter the land game by entering the user name and password.

3. Set up your extranet, which is WAN. (The options in different land tours are different, but the basic functions are the same, and you should be able to find them all if you look for them.) Find this option and fill in your adsl account and password in poppe.

4. Set your LAN IP, which is LAN. Or take me as an example,Since my land game's IP is So in order to facilitate my setting of the LAN IP is Of course,If you don't like it, you can change it to something else.,But after changing, you have to change the land game's IP to it.,If I want to set the LAN IP to Then I have to change the land game's IP to.。

Well, now that the LAN IP has been set, if you don't want to do any management to go online, then each computer can access the Internet as long as the network card automatically obtains the IP. If you also want to do some management of the computers in the LAN, then you need to set a fixed LAN IP address for each computer. If the LAN IP is set to then your computer's IP can be set to any number between 2 and 254, and each computer should not be the same, 1 is not your land gamer.

If the LAN IP is set, then the IP of the computer can be set.

Maple zmx said in great detail.

Suddenly, absolutely no problem, I just ran into your problem, but by solving it.

Just set up one available IP and you know it.

If, after the router is set up, one person is unable to connect to the router, the steps to fix the problem are as follows:1First check if the device's network settings are correct.

You can try to reconnect to the network, restart the device, and other operations to ensure that the device can be connected to the network normally. 2.Check if the router settings are correct.

You can check if the device is disabled or MAC address filtering in the router settings page, and if so, undisable; If the MAC address is added to the MAC address filter list, the device address is added to the allowlist. 3.Try reconfiguring your router.

You can try to reconfigure the network settings such as wireless network and DHCP on the router management page to ensure that the device can connect to the router normally after rebooting. 4.If none of the above methods work, you can try resetting the router and then resetting the network and device connection again.

5.If you still can't solve the problem, you can try to contact the router brand customer service center or after-sales service for more detailed technical support. The above are common solutions, and users can take corresponding measures according to their specific situation.

If only one person needs to connect to the router, you can follow the steps below to set it up:1Connect the router to a broadband access point (such as Fiber Modem, ADSL Modem, etc.).

2.Connect your computer or other device to your router's wireless or wired network. 3.

Open a browser on your computer or other device and enter your router's IP address (usually or. 4.Enter your router's username and password to log in.

5.On the router's management page, select Wireless Settings or Wired Settings, find options such as "Add Device" or "Add Client", and follow the prompts to set up. 6.

Once the setup is complete, save the settings and restart the router. Once you've completed the above steps, you're ready to get a person connected to the router. If you need more than one person to connect to the router, you can add multiple devices or clients to the settings.

Your statement is too unclear, what kind of network are you on? Broadband or campus or a shared network like a company?

If it is broadband, you need to insert the socket of the external network into the WAN port, insert several sockets that need to share the Internet into the LAN port, and you need to set up a PPPOE account, which is available in the router settings page, or can also be found in the setup wizard. The LAN is set to the same network segment, for example, the gateway is set to. However, now the encryption method of e-Surfing broadband has changed, and you need to log in with a special client, so you can't use a router, and you don't know if the broadband business of other companies has changed, if it doesn't change, you can still use this method to share the Internet.

If it is a campus network, you need to set the address of the WAN port to the IP given to you by the school network center, and if it is automatically obtained, you need to ignore it. The campus network needs to be logged in on the web page to log in and then you can share the Internet, if you need to log in to the client, such as "Ruijie", you can't share the Internet with the router.

Similar to the corporate network or residential area network, the LAN is similar to the campus network, and you need to set the WAN port to provide you with the IP or automatically obtain it.

All in all, as long as the network that requires the client to log in cannot use the router to share the Internet due to the incompatibility of encryption methods, it can share the Internet without this similar protection method.

Your router is momem, you can only access the Internet by one person, if you want multiple people to access the Internet, you also need to buy another broadband router, about 60, 70 yuan for 4 ports, and about 100 yuan for a wireless router.

If the router settings do not meet the network requirements, you can reset the router. Here's how:

1. Connect the home network cable to the WAN port of the router.

2. Use another network cable to connect one end to the computer, and the other end to connect the routing LAN port (the LAN port is the interface marked on the route).

3. Turn on the computer, open the browser, and enter the route login IP in the address bar.

4. Enter the routing login account and password in the pop-up dialog box, if you don't know the routing login IP, login account and password, you can flip the route over and look at it, and write it on the back of the route.

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface, which is pppoe, and enter the Internet account and password.

6. After the settings are complete, save the exit and restart the route.

After the routing restart is complete, the routing hardware connection and setup are complete.

1. Check whether the DHCP function on the routing settings page is enabled, and if not, it is enabled.

2. Check the network card settings of each computer to see if it is set to "automatic". If so, each computer can automatically obtain the IP address assigned by the router's DHCP and surf the Internet.

3. If you see which computer network card has been set to "automatic", and you can't automatically get the IP address and go online, change "automatic" to "manual" setting, and fill in the corresponding router gateway address segment correctly and manually fill in the IP address, mask, gateway and primary and secondary DNS and other parameters.

4. Check the connection between the original router and the computer. The correct one should be the network cable of the modem (cat), or the network cable that goes directly to the home, which should be connected to the WAN port of the router, and the network cable of each computer should be connected to the LAN port of the router.

If you can access the Internet on 2 computers at the same time through the route, but you can't do it after repair, then you can first call the ISP service provider to ask if they block the function of multiple computers accessing the Internet at the same time (some regions have this restriction), if you don't answer that there is no such restriction, then you can manually configure the router. For specific configuration, refer to the manual. Note:

For example, if the IP of the router is set to, the IP address of the NIC is set to any one between 2 and 255), the subnet mask is set to the gateway IP is the same as the IP of the other computer, and the IP address of the NIC is different from the IP address of the previous computer. It is also the last change. (For example, machine A is set up, machine B is set.)

The subnet mask and gateway copy the first one. If the router has DHCP turned on and the router dials up, your NIC only needs to keep "Automatically obtain IP address".

Whether the router dial-up is set, if it is set, it is necessary to check whether the computer that cannot access the Internet has obtained the correct network parameters, and compare it with the network parameters of another computer that can access the Internet.

A router's network is not just for one person.

The number of users of the router network depends on the wishes of the router owner.

The owner can choose not to open it to the public for the rest of his life, so only the owner can use this router to erect a slow limb network.

The host can also choose to be completely open to the public, as long as anyone can receive a signal can use this router network.

If a password is set, then the owner can choose the crowd to tell the password, and the person who knows the password can use this router network.