What tiles are not afraid of high temperatures? What is the difference between high temperature tile

High temperature, which means higher temperature. The specific values referred to in different cases are different, for example, in some technical terms, it refers to more than a few thousand degrees Celsius; When the daily maximum temperature reaches 35 or more, it is a hot day. High temperature weather will have a serious impact on human health, transportation, water and electricity consumption.

Generally speaking, the tiles of acceptable quality are resistant to high temperatures, and it is said that they can reach up to 1,000 degrees.

How to buy tiles.

1.To see if the color of the tile is pure. Mainly observe whether the color of the back of the tile is uniform and consistent.

2.It is necessary to observe whether the particles of the cross-section of the tile are fine. The cross-section here does not refer to the cutting surface around the tile, but to the fracture of the tile fragment.

Generally speaking, the fracture is fine, hard and brittle, and the color is the same. Because the ceramic tiles with fine particles have strong waterproof ability, while the tiles with large particles are easy to soak in moisture, which affects the quality.

3.Pay attention to the thickness of the glaze layer. The thickness of the glaze layer is the thickness of the cross-section of the glaze. Glaze is the most expensive material in the cost of ceramic tiles, and the thicker the glaze, the better the quality.

4.To listen. Tap the tile to pay attention to whether the sound is crisp, such as the sound is clear and pleasant, such as the sound is dull, it is inferior.

5.Test the waters. Consumers can pour some water on the back of the tile and pay attention to how quickly the tile absorbs water. After a few minutes, see if the marks left by the water on the front are obvious. The density of tiles that infiltrate slowly after the water disperses is large, and the marks left by the water are not obvious, so they are regarded as the top grade.

6.Warp. Take two bricks back to back and face to face to see if they can be in close contact, and there is no phenomenon that the gap is too large to judge whether there is warping.

7.Infiltration. Find ink to apply to the surface for 1 hour and then scrub to see if there are traces, no traces are good bricks, and those that have infiltration are resolutely not selected.

The tiles are all fired, and they are not afraid of high temperatures.

Baxter ceramics are still relatively resistant to high temperatures

Pro, the difference between high-temperature ceramic tiles and low-temperature ceramic tiles 1, temperature bituan: high-temperature porcelain firing temperature is more than 1200 degrees; At low temperature, the firing temperature of pure porcelain is 700-900 degrees. 2. Color:

The color of high-temperature porcelain is fuller, delicate and crystalline; Low-temperature porcelain is more woody in color. 3. Feel: high-temperature porcelain is smooth and delicate; Low-temperature porcelain is slightly coarse.

4. Sound: high-temperature porcelain is relatively crisp; Staring at orange and warm porcelain with low hands is relatively low. 5. Texture:

The hardness of high-temperature porcelain is stronger; Low-temperature porcelain is more fragile.

Tiles can be divided into these six types: mosaic, polished tiles, antique tiles, glazed tiles, full-body tiles, and vitrified tiles.

Full-body brick: Full-body brick has an advantage that has to be said, that is, its anti-slip performance is particularly good. Generally, the non-slip bricks we know are this kind of full-body bricks. It's the same on both sides.

This kind of tile is also cost-effective, which is considered to be inexpensive.

Polished brick: To put it simply, polished brick is actually a brick made after the surface has been polished. The polished tile material is relatively hard, which is suitable for many indoor places. But try to avoid restrooms and kitchens.

The advantage of polished tiles is that the quality is very light, and the general physical object is consistent with the first color. But the disadvantage of it is that it has poor slip resistance. So be cautious when buying.

Vitrified bricks: Although vitrified tiles also need to be polished, the difference is that it does not need to be polished, it is smoother, and the material is harder. In many ways it is much better than ordinary marble.

It has the advantage of being more distinct in color, relatively safe in composition, and lighter in weight for easy cleaning.

Glazed brick: its ** is relatively high, it is worth mentioning that its stain resistance is relatively strong, so it is especially suitable for use in bathrooms, kitchens and other places, easy to clean.

Antique brick: As the name suggests, it imitates the ancient, the style is more retro, the American style is more American, and the overall atmosphere is more atmospheric and calm.

Mosaic: Presumably, it may be because mosaics don't look very high-end, so they are often used in places like bathrooms haha.

To sum up: in fact, decorating a house is a comprehensive thing, it has to combine all aspects, such as your preferences, your income, and so on. You can't blindly listen to other people's introductions, after all, what suits you is the best.

This should be the kind of ceramic brick relatively speaking. That is to say, in the case of this ceramic brick, his thermal insulation effect is also relatively good, so relatively speaking, he is still relatively high temperature resistant, I understand it this way.

On the whole, the heat resistance of all ceramic tiles is better.

The whole tile has high hardness, not easy to break, good anti-fouling performance, low water absorption, and relatively heat resistance.

Ceramic bricks have poor water resistance, easy permeability, and are not heat resistant. If you are considering heat resistance in your home, you can choose full tiles.

It must be that all ceramics are more temperature-resistant. Because it takes a higher temperature to fire it.

Generally, ceramic tiles are fired at high temperatures, and they are not afraid of high temperatures, but they are afraid of impact! It's better not to be hot and cold for a while! Hope it helps.

Of course, the tile is fired in the kiln at a high temperature of about 1200°, and it is best to use it as a geothermal brick at home, which is more conducive to the dissipation of heat. Therefore, as long as it is not more than 1200° environment, its heat resistance temperature is not limited.

High temperature resistance is only relative, generally about 200 degrees, and lower in winter.

1. Comprehensively replace commonly used decorative materials such as aluminum-plastic panels, honeycomb panels, curtain walls, etc., multi-functional integration, one construction can solve the two functional requirements of thermal insulation and decoration, and it is smooth, smooth, beautiful and decorative.

2. High strength, good rigidity, light weight, seismic resistance, wind pressure resistance, creep resistance, superior performance, reduce the load of the building, and be more economical and durable.

3. Fire retardant, thermal insulation and energy saving, sound and heat insulation, crack resistance and waterproofing, construction design in accordance with 65% building energy saving requirements.

4. The finished product is simple to install, the process is simplified, the construction period is shortened, and the quality is easy to control.

5. Do not use aluminum, steel, keel bracket, embedded in the installation, reduce the gap between the insulation board and the wall, and increase the safety system.

6. No radiation, green and environmentally friendly, can be widely used in all kinds of public buildings and home interior decoration.

7. The installation of cement saves a lot of materials, manpower and time, reduces the air pollution caused by the combustion of cement production, and meets the requirements of green and low-carbon environmental protection.

Year. The above carrier life, more than 20 years of long-term decoration life, adapt to a variety of regions such as climate and complex environment, compared with the same number of fast quality of international aluminum-plastic panels, aluminum veneer and steel hanging stones, reduce the load bearing by 30%-90%.

9. The efficacy is doubled, the construction period is generally shortened, but the comprehensive cost is reduced by 30%-70%.

Summary. Can I sprinkle water on the floor tiles at home if I don't live for a long time in hot weather? Since the weather is too hot in summer, the air is dry, and the temperature rises, you can sprinkle water on the tiles to achieve the effect of cooling!

Sprinkling can increase air humidity, reduce air temperature, increase air humidity, improve the humidity of the surrounding environment, reduce dust in the air, and make people feel comfortable, fresh, and ......happyAt the same time, it can also achieve the effect of protecting tiles! It's a great way to kill two birds with one stone!

Can I sprinkle water on the floor tiles at home if I don't live for a long time in hot weather? Since the weather is too hot in summer, the air is dry and dry, and the temperature rises, you can sprinkle water on the tiles to achieve several rounds of cooling effect! Sprinkling can increase air humidity, reduce air temperature, increase air humidity, improve the humidity of the surrounding environment, reduce dust in the air, and make people feel comfortable, fresh, and ......happyAt the same time, it can also achieve the effect of protecting the tiles!

It's a great way to kill two birds with one stone!

Will the tiles be tiled after sprinkling?

The reasons for this situation are: 1. The dry ash layer of the tile is not compacted or the mortar is not full and even, and after the water, the contraction and expansion of the mortar layer of the bridge stop at the bottom causes a part of the tile or one side of the tile to sink, resulting in the overall uneven situation. 2. The seam of the tile is too narrow, and after the ground is drenched, the base layer expands, resulting in the arching of the tile.

It means that it is better not to get drenched. Yes.

Silicon nitride ceramic.

Silicon nitride ceramics is also an important structural material, it is a superhard substance, low density, itself has lubricity, and wear resistance, except for hydrofluoric acid, it does not react with other inorganic acids, strong corrosion resistance; It is also resistant to oxidation at high temperatures.

Moreover, it can also resist cold and heat shock, heat up to more than 1000 in the air, cool sharply and heat sharply, and it will not break. It is silicon nitride that has such good properties that it is often used to make mechanical components such as bearings, steam turbine blades, mechanical seal rings, and permanent molds.

Alumina ceramic.

Alumina ceramics (artificial corundum) are a promising high-temperature structural material. It has a high melting point and can be used as high-grade refractory materials, such as crucibles, high-temperature furnace tubes, etc.

Boron carbide ceramics.

Boron carbide materials have the properties of light weight, high hardness, high wear resistance, high impact resistance, neutron absorption, etc., and have broad application prospects in high-tech industry, nuclear power technology, national defense and military industry, etc., and are important strategic materials in the national economy and national defense construction, with a wide range of uses.

Boron nitride ceramics.

The boron nitride usually prepared is a graphitic structure, commonly known as white graphite. The other is diamond type, which is similar to the principle of graphite to diamond, graphite-type boron nitride can be converted into diamond-type boron nitride at high temperature (1800) and high pressure (800MPa).

These four are the more common ultra-high-temperature resistant ceramics.

Tile. Polished tiles. Matte bricks. Wear-resistant bricks. Crystal tiles. Square bricks.

High-temperature brick is a ceramic tile made of Shina quietly high temperature and high pressure, which has higher wear resistance than ordinary tiles used for paving, so it is quite suitable for the decoration of the floor. Generally, the surface of high-temperature bricks is quite smooth, but the surface of high-quality bricks is not easy to slip even if it is wetted after special treatment. Due to the smooth and attractive color and texture of high-temperature bricks, many families began to use them to pave the floor of the living room, so that high-temperature bricks began to appear in the hall in addition to searching for slag in the kitchen and bathroom.

All porcelain ones are fine. Shunhui ceramics can.

800···1000！Then you have to use antique bricks! Antique brick bar dismantling the core·· The horse brigade is slow to dig but Polo which faction L&D is pretty good! It is produced by Weimei Group!

Good brands of polished tiles are fired at a high temperature of more than 1000 degrees, and if you want to look at the bottom of the embryo, the temperature of the bottom of the water absorption rate of the whole porcelain will be high.