After I partitioned the data, the data was gone, and the system was always said to be mirrored wrong

1. Reformat the C drive.

Second, it is best to enter the PE installation when installing the system to avoid errors.

3. Install the system according to the following method.

1. Put the system disk into the optical drive.

2. Press the F2 button to select Start from CD when you boot up.

3. Select Enter PE System in the Disc option.

4. After entering the system, use the one-click restore tool in the PE system to restore the system image in the disc to the C drive.

5. After the restoration ends, start the computer from the new, the system will automatically install the drivers and applications, and the computer will automatically restart and enter the system when everything is ready.

6. The installation is complete.

4. If the installation still fails, it can be considered as a problem with the system disk, and replacing the system disk and reinstalling the system can solve the problem.

1. It may be a problem caused by the partition is not divided "System 119" has a detailed partition tutorial above, compare it with your partition to see if there is any discrepancy, if there is a discrepancy, re-partition your computer;

2. There is a problem with the guidance of the installed U disk, and there will be various small problems at this time, so the guidance of the U disk will be remade;

After trying the three methods, there should be basically no problem.

When the system is reinstalled, a message is displayed indicating that the image file cannot be stored on the restored partition, which means that the image file cannot be stored in the system partition.

The system partition is the object of restoration, so the image file cannot be stored.

For example, a mirror file is like all the materials used to build a building, and the system partition is like the foundation of a building. Therefore, all the materials used to build a building must be stacked in an area other than the foundation of the building.

The image file is all the original materials of the system, and these original materials must be combined into the system according to certain rules and stored in the system partition. Therefore, the image file must be stored in a partition other than the system partition.

You should now be in PE, go to DiskGenius to see if your hard drive is not partitioned and not formatted.

To put it simply, "files used to install the system - mirrors" cannot be placed in the "partition used to install the system". Generally, the system is installed on the C drive, and the image should be placed in a partition other than the C drive.

Copy the image file to another disk.

The image file here is the file you use to restore the system, if this file is in the partition where you plan to install the system, that is, the target partition to be restored, then the image file will be overwritten during the restore process and cannot be read, so the program will prompt when it detects this situation and will not continue to perform the restoration.

Copy the image file to another partition and then restore it.

What did you use to reinstall the system.

Resolution.

1. Click the "Start" button, right-click the "Computer" option in the "Start" menu, and select "Manage" in the pop-up menu.

2. Open the computer management menu, if the current user is using a standard account, the user will be asked to enter the administrator account credentials. In the computer management window that pops up, click the Disk Management option in the left navigation bar under Storage, and the disk management tool will be loaded in the right pane.

3. Hard disk management, click the "unallocated" space in disk 0 (if it is the second hard disk, disk 1, and so on), right-click and select "New Simple Volume", and the "New Simple Volume Wizard" dialog box will appear.

5. Set the partition size, Windows allows users to create partitions with a minimum space of 8MB and no space upper limit (if there is enough allocable space), the unit here is megabytes (MB), and users can allocate according to the allocable space of the disk and personal needs. After setting the partition size, click the "Next" button, the page of assigning a drive letter and path will be displayed, and you need to set a drive letter or path.

6. Assign a drive letter.

After setting the partition allocation method, click the "Next" button, the partition formatting page will be displayed, to make the partition available, the partition must be formatted, in this step you can make a simple setup for formatting.

7. Formatting settings: After setting the formatting options, click the "Next" button, and the completion page of the "New Simple Volume Wizard" will be displayed. The settings selected by the user to create a partition will be displayed.

8. Complete the partition creation.

If the settings are incorrect, click Back and return to the corresponding steps to set the settings again.

Once you've confirmed that everything is correct, click the Done button and the partition will be created for the physical disk. When a partition is created, the system will automatically connect to the new partition and may display the dialog box shown in the figure, which the user can choose to do or close as needed.

As we all know, the operating system will slow down after being used for a long time, and this is because the software installed on the system, temporary data, system junk, etc., will affect the running speed of the operating system. In addition, the brigade split mold operating system can also suffer from virus attacks, and sometimes the operating system will crash for no reason. When there is a problem with the system, the most effective way to solve it is to restore the system or reinstall the system.

According to statistics, only a few users will have a backup of the system, and most users choose to reinstall the system after the system has a problem.

Reinstalling the system is when the operating system of the computer is reinstalled. When the user misoperates or is damaged by viruses and Trojan horses, the important files in the system are damaged, resulting in errors or even crashes that cannot be started, and have to be reinstalled; Some people who like to manipulate the source of the computer, in order to optimize the system under the normal operation of the system, so that the system works in the optimal state, and reinstall. Reinstalling the system involves formatting the previous system disk, which often leads to loss of important files saved in the system partition.

For example, many users like to save files on their desktop, so that the files will be formatted after reinstalling the system. How to reinstall the system data recovery is a problem that many computer users are concerned about and urgently need to solve. So how to get back the data lost after reinstalling the system?

As mentioned earlier, the reinstall operation will first format the original system partition, so you can use the "Formatted Hard Drive" module of the top data recovery software to retrieve the lost files.

Steps: Step 1: Click"Formatting the hard drive by mistake"Mode.

This mode can be used to recover: formatting the disk by mistake, reinstalling the system to another disk, and reinstalling the data of the C drive before reinstalling the system.

Note: Before reinstalling the system, please scan the C drive for files on your desktop.

Step 3: Wait for the scan to end.

Note: If a file is lost, the file name will be automatically changed by the system. If you don't find the files you need, use them"Magnum recovery"mode scan again.

There are a few ways you can tell if it's the data you need.

1.** And documents are supported preview, please click on the scanned file to view.

2.It is determined based on the time when the data was created and modified.

3.Find according to the type of file, for example, if you are recovering Word, select Document as Type, and then click Find.

After following the steps above, the recovered data will be stored in the disk you selected.

Prepare before reinstalling the system:

2.Back up data on your desktop, including other personal files in the system disk.

3.Back up IE favorites.

4.To back up the drivers in your computer, please use software such as Driver Life, Driver Genie and so on.

5.Back up your internet and passwords.