What should I do if my iPhone4 falls into the water and can t turn it on? 5

It is estimated that there may be a problem with the motherboard, this repair is very expensive, it is better to buy a second-hand mobile phone is cost-effective, it is more than 1000 yuan, if you repair it is estimated that it is more than this! In fact, you shouldn't turn it off, so that the heat in it can take away part of the water vapor, and it will not cause voltage fluctuations, and if you turn off the phone, the water vapor can't go, which will not only corrode the motherboard but also cause a short circuit in the battery when it is turned on.

What should I do if my phone falls into the water?

Precautions for iPhone falling into water:

1. If the screen turns black and you can't press the power button to turn it on, once the device is working, it is easy to have a short circuit, causing damage to the motherboard;

2. Do not use the hot air of the hair dryer to blow or expose it to the sun, which will cause the circuit board to deform;

3. Do not turn on the test frequently within 24 hours after falling into the water, and place it in a cool place for half a day to install the battery for testing;

4. If the above steps do not solve the problem, do not easily try to disassemble the machine, please consult a professional Apple repair center for processing.

Coping Methods:

1. Remove the mobile phone from the water as soon as possible, and turn it off immediately. This is very important, whether the screen is black or not, please quickly shut down to prevent the motherboard from being burned out by short circuit, if you press and hold the power button to turn off, please press and hold the power button and the home button until the system shuts down.

2. Take out the SIM card, remove the mobile phone case and other objects, and use a tissue or cloth to remove the water outside the fuselage and in the crevices. Wipe the SIM card as soon as possible after it is removed. Note that the headphones and power connector can be plugged in and blotted dry with a small cotton swab or paper towel strip.

3. Wrap the body with a towel or paper towel with good water absorption to absorb the water. Don't use the method of throwing. Shaking will cause the water that has already entered the fuselage to spread, and it will come into contact with elements that cannot touch the water, causing even worse results.

4. If it is mild water ingress, you can wrap the fuselage with a paper towel, put it into a small bag of desiccant (often attached to food) while putting it into a bag, or you can put it into a bag full of rice, try to empty the air and seal it. Then put the whole set in a slightly heated place, such as a computer heat.

Note:Do not place in a hot environment, nor blow with a hot air dryer, as doing so will damage the internal components. Wait until there is no fog, it is best to leave it for another half a day, take it out, and naturally return to room temperature.

iphone6 water does not turn on, pick up a leak, fortune small capacitor is here again!

First, find a rag or toilet paper, and clean your hands and the surface of your mobile phone first.

Second, the mobile phone water treatment.

After simply treating the surface, place the phone that fell into the water in a dry rice bag and leave it for about 24 to 36 hours to remove the water, or even longer. This is a simple, convenient and easiest way to operate.

3. Use a professional tool to disassemble the phone, and then use a hair dryer to dry it.

If the phone placed in the rice bag still can't be turned on, or you can't disassemble it, just take it to the repair shop and spend some money for the technician to repair and clean it.

1. Apple 4 fell into the water, and the main reason why it can't be turned on after a day is that after the mobile phone enters the water, the internal water vapor has not completely dried, resulting in a short circuit in the circuit or damage to the parts by moisture.

2. Solution: Take the mobile phone to the nearby Apple official after-sales service point, and the staff will disassemble the mobile phone, drain the water vapor and air dry it after disassembly, and then reinstall the mobile phone for testing; If it still can't be turned on, it may be that the parts of the mobile phone have been damaged, such as battery failure, motherboard chip failure, screen failure, other parts damage, etc., you need to detect in detail, find out the fault point and repair it or replace the faulty parts.

1. Do not turn it on.

2. Use a hair dryer to dry.

3. If it is invalid, it will be repaired.

A brief explanation of the shortcomings of licensed Apple mobile phones: The main disadvantages of Apple mobile phones in general are: 1. It is not good to drop the ground.

2. Collision does not work. 3. Water ingress, dampness is not good. Apple mobile phone usually use these three most critical, so be sure to keep the use, Apple mobile phone warranty within one year into the water maintenance of 2000 - 3000 below the price, the warranty period expired repair of a new mobile phone.

Apple's various explosions are no pressure It is recommended not to play when you go to WC. . .

The ** in the water is the most taboo to forcibly turn on the machine and go directly to the maintenance.

Go to Apple after-sales maintenance, if the price exceeds 1500, replace it directly

It is estimated that the motherboard is broken, if it costs a lot of money to repair, you can sell it to me cheaper!

It may be that the circuit motherboard has water ingress, some short circuits, and needs to be repaired. After the phone accidentally gets into the water, it is recommended to do the following immediately:

1. First of all, take out the SIM card to avoid losing contact information. If the phone falls into salt water instead of fresh water. Salt water forms a "salt crust" in the phone's internals.

If your phone falls into seawater or other salty water, you need to rinse it gently with fresh water – after removing the SIM card and before the drying process begins.

2. Next, wipe each part of the phone with a cloth or paper towel, and do not move or shake the phone too much, so that water does not swim everywhere inside the phone.

3. Try wrapping your phone in a cloth or paper towel for a few minutes to absorb excess moisture. Then turn on the cool breeze setting of the hair dryer and blow at the hole of the mobile phone at a distance of about 30cm from the mobile phone for at least an hour.

4. Finally, wrap the phone in a thin tissue and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone.

5. The above is only a salvage measure, if there is still a failure, please go to the after-sales maintenance.

Do not turn on the machine after water has entered.

After the mobile phone is flooded, there may be water inside the mobile phone, and if it is turned on at this time, it is likely to cause the mobile phone to burn, and this burning is generally time-consuming and expensive to repair.

After the mobile phone gets water, it should be turned off immediately, remove the moisture from the surface of the mobile phone, and then immediately take it to a professional repair point for inspection and repair.

Eh, the phone should be removed immediately when water enters the battery to prevent the circuit from burning and put it in a ventilated place to dry to help the water volatilize (but Apple's battery can't be taken out, so in this case you shouldn't have any operation) If you are so in the case of water retention inside the phone, it is very likely that the power has caused the line to burn But it is recommended that you do not disassemble the machine yourself (I have disassembled it myself and can't install it, professional maintenance personnel feel that Apple's machine is not easy to disassemble), or take it to the store to check it as soon as possible (If you go to a third-rate shop, it will get worse and worse They will use your mobile phone as an experiment and will steal the original of your mobile phone I am the victim) But the repair cost of the store is higher I don't know if you have passed the warranty period If you haven't passed, the charge should not be much, but if it is over, it will be expensive Prepare about 500 yuan It is possible to replace the parts You can't find a solution if you ask on the Internet Or honestly take it to the store to check it Good luck!

Tell someone to disassemble the machine and dry it immediately.

Tell someone to disassemble the machine and dry it immediately, otherwise it will burn.

The possible reasons why the Apple 4S can't turn on after falling into the water and the general treatment methods are:

The water quality is very good, there is no corrosive ability of pure water, then, the mobile phone may only be a slight internal leakage, resulting in the inability to turn on, in this case, as long as it is dried or dried, it can be restored to normal;

The water quality is acceptable, but there is a possibility of corrosion, in this case, the mobile phone may not be broken, so as long as it is disassembled, clean the motherboard and parts with anhydrous alcohol, dry it, install the machine, if it is normal, the relationship between the use of the mobile phone in the future will not be too large;

For the mobile phone that has been treated by the second method, if it cannot be lit, it can only be sent for repair to replace the damaged parts of the motherboard or other parts caused by water ingress, and after repair, it can be used.

If the iPhone does not turn on due to falling on the ground or being squeezed, it is easy to cause hardware failure, resulting in broken battery cables or false soldering or cracking of the motherboard chip, which may cause the motherboard to bend and break the wire.

Water ingress, this is also the most fatal reason why the iPhone does not turn on, because the iPhone battery is built-in, and the battery cannot be removed, so if the water is in, the battery will continue to supply the motherboard, plus the motherboard is short-circuited, and the motherboard short-circuit part will be oxidized and corroded, the light one will burn out the small capacitor resistance, and the heavy motherboard power management chip will burn out and cause not to boot. Here we need to remind customers that after the iPhone enters the water, if the iPhone can be turned on, it will be turned off immediately, put it in a dry place to dry for 1-2 days and then turn it on, if it can't be turned on, it is best to send it for repair; If you feel that the back cover of the mobile phone is heating after turning off, you can only contact it for repair as soon as possible, so as not to cause serious corrosion and the cost is too high.

Static electricity automatic protection, this is the most common iPhone does not turn on fault, this is also a unique function of iPhone, if static electricity enters the motherboard, the motherboard will automatically power off protection. You need to press and hold the power button and home button at the same time for 10 seconds to turn on the computer.

4.The iPhone does not turn on due to the software caused by mistake, due to the wrong upgrade flash, jailbreak, software installation caused by the boot of the white apple or enter the recovery mode (data cable + iTunes icon). This fault is simple, and it is enough to do the system again.

iPhone not turning on can be roughly divided into these 4 categories. You can use it as a reference, if you don't understand something, you can call us, and the iPhone hardware engineer will answer for you.

Shut down immediately after falling into the water, wipe off the water and place the iphone4s upright (the charging port is facing down), and then turn it on after a few days (you can also directly disassemble the machine to see if there is moisture, but it is not recommended, the screws of the iphone4s are plum blossom-shaped, and they cannot be removed without a special screwdriver).

Sold it and bought it again, the water inlet machine is basically useless, you fix this, and it won't be long before there is a problem again。。 Hope!!

Put it in the rice pile for an interview, and I read it on the Internet before it said that it absorbs water.

If it doesn't work, you'll have to take it to the Apple store.

Mine was washed in water and later repaired.

Take it to repair and after-sales service, ask for money,

The water should be dry before it can be turned on, so you can only take it for repairs.

After soaking up the water in the rice, find a box and keep it as a souvenir.

Maintain the status quo and immediately take the repair shop to disassemble and repair.

If you burn the motherboard, you can't do anything.

Pour some toilet water to kill and kill viruses.

Where to repair, you have to be mentally prepared.

Take it apart and blow it with a hot blow dryer to see how.

Have you tried to turn it on after flooding?

Put it in the rice bowl and wait until it is completely dry to see if it can be turned on My friend's fell into the washing machine and took it out to air dry for a few days and it turned on = = iPhone water is not warranted to repair the landlord can only pay for it Find a designated iphone repair point.

Go to the store for repair, and the mobile phone should be kept in a separate state from the battery and the body to avoid causing the circuit to be UMC, and go to the store as soon as possible.

My iphone4s fell into the sea, scooped up and dried and turned on, and the rear light was on for a month. This time, I fell into the toilet and soaked for almost 1 hour before I found that the back cover had been opened, dried with a hair dryer, and put it on the balcony to dry, I don't know if it can be used.

Apple devices can not occupy water, please go to the store immediately for repair, say bad can be saved.

Take it apart and wipe it with grappling water.