What is the function of wall reinforcement? What is wall solidification and what does it do?

Wall solidification is a wall curing adhesive, a substitute for 801 glue and interface agent, and a green environmental protection, high-performance interface treatment material. The wall solid has excellent permeability, which can fully infiltrate the surface of the substrate, make the base layer dense, and improve the adhesion of the smooth interface. The wall solid is non-toxic, tasteless, and is a green and environmentally friendly product.

It has excellent permeability, can fully infiltrate the surface of the wall base material, make the base layer dense through gluing, improve the interface adhesion, improve the bonding strength of the mortar or putty and the wall surface, and prevent hollowing. It is suitable for the compacting treatment of the base layer before plastering or batch scraping putty of brick-concrete wall. Wall solidification can improve the adhesion of smooth base layers, and is an alternative product of traditional building interface agents.

It is also suitable for the bonding of wallcovering and wallpaper. Due to the easy coating, thin adhesive film and suitable initial tack, it is especially suitable for the smooth bonding of wallcloth and wallpaper, and it is not easy to produce dead folds and bulges. It can also be used for basal "hair making".

Wall solid is a wall curing adhesive, which is a substitute for 108 glue and interface agent, and is a green and environmentally friendly, high-performance interface treatment material. The wall solid has excellent permeability, which can fully infiltrate the surface of the wall base material, make the base layer dense through gluing, improve the interface adhesion, improve the bonding strength of the mortar or putty and the wall surface, and prevent hollowing. It is suitable for the dense treatment of the base layer before plastering and scraping putty on brick-concrete walls.

Wall solidification can improve the adhesion of smooth base layers, and is an alternative product of traditional building interface agents. It is also suitable for the bonding of wallcovering and wallpaper. Due to the easy coating, thin adhesive film and suitable initial tack, it is especially suitable for the smooth bonding of wallcloth and wallpaper, and it is not easy to produce dead folds and bulges.

It can also be used for basal "hair making". Good wall solid is a water-based adhesive made of polymer and various additives, and the appearance is milky white glue. It has excellent permeability, which can fully infiltrate the wall base layer, improve the bond strength of the base layer and prevent hollowing.

It is suitable for the interface treatment of concrete, aerated concrete, brick-concrete wall batch scraping putty or plastering before the base layer to improve the adhesion of the smooth base layer. Manual "brushing" on the wall base can be used for cement brushing, and can also be used to paste wall covering.

If there is a phenomenon of running sand, the cement floor is loose and difficult to clean, and a large amount of floating dust will appear every time it is cleaned. This not only causes pollution to the environment, but also adheres to the dust particles of the cement floor on the working surface during the subsequent construction process, thereby reducing the quality of batch scraping putty and latex paint. The appearance of wall solid can avoid the above problems, the wall solid is made of imported polymer after multiple processes composite, polymer can penetrate the cement floor, firmly block the loose particles of the cement floor, so that the ground forms a tight one, which is convenient for the close combination of decorative materials and the ground, and effectively prevents the hollowing of the floor tiles.

The wall is resistant to water and moisture, which can avoid the deformation of the wooden floor due to moisture erosion, and at the same time avoid "dusting" from the cracks of the floor in the future. Wall solid products do not contain formaldehyde and other harmful substances, are green and environmentally friendly products, and are harmless to the human body.

After the acceptance of the house, there will be these three problems: now the ground and wall of most new houses are not in place during the painting construction, resulting in hollowing, cracking, and sand; The marking of cement in the mortar is insufficient, and the structural force is insufficient; It is the insufficient proportion of cement in the mortar; It is that the soil content in the mortar used is too high, which affects the structural force of the stucco layer; The wall is made of the base layer, and the base layer is made above the stucco layer. The appearance of the wall solid is milky yellow emulsion, and the ecological wall solid has strong permeability for the wall and ground, which can replace the traditional chiseling, improve the interface adhesion of the smooth base layer, and have high bonding strength, ensuring that the cement brushing is firm and reliable.

Enhances the potent combination of putty, latex paint, wallpaper, mortar, etc. with cement walls. For example, wall solidification can effectively solve the problems of roughness of cement smooth base layer, putty depowdering and adhesion of latex paint, wallpaper and mortar.

Wall solid is a relatively common home decoration material, used for wall curing, is a green environmental protection, high-performance interface treatment material.

Function: 1. Curing the wall: the wall has a good infiltration effect, and has a good inhibitory effect on the sanding, loosening and hollowing of the wall.

2. Increase the adhesion of the foundation: Brush the wall before scraping white, which can increase the adhesion ability of the putty to the wall and prevent the putty from hollowing and peeling.

3. It has an inhibitory effect on the anti-alkali of the wall: the wall solid can also play a shielding role, and it has a certain inhibitory effect on the anti-alkali of the cement wall.

Usage and Dosage:

After the wall is smeared and dried or "hair-making" curing and drying, you can start plastering or scraping putty, add cement mortar with 1:1 cement mortar, and wipe it on the back of the tile for leveling and compaction, the mortar is carried out from top to bottom, and the flatness is checked with a ruler at any time.

When bonding wallcovering and wallpaper, if the viscosity is high, a small amount of water can be added to dilute it, and water should not be added to "make hair" with wall solids. Consumption: Theoretically, 1 kg of wall solid can be coated with 10 square meters, and the actual amount is determined by a variety of factors in the construction.

The exterior wall tiles bulge off and fall off, and it is found that the wall is sandy and powdered, whether it is good to paint the wall, and whether it is necessary to brush the wall.

How to tell if the wall is good or bad?

1. First of all, open the barrel to observe whether the wall is uniform, there should be no delamination, agglomeration, and pungent odor.

2. During the construction process, the wall should not produce a large number of pungent odors, and the smell should not remain for a long time after the construction is completed.

3. Wall solid is a kind of permeable curing agent, the firmness of the wall should be significantly improved after the construction is completed, and the wall solid penetrates the base but there should be no obvious film formation on the surface.

4. The wall should have water resistance, and the water will not fall off or fade after the construction is completed. If the glue type wall is thick and thick, there will be obvious film formation, and the coating film is not water-resistant, and there is a great risk of bleeding and peeling of the late tiling or batch scraping putty powder.

5. In addition to the above performance, it should also have bright colors. As for adding powder to the wall solids for better coverage, this product will significantly sacrifice the curing ability of the wall solids to the base layer.

The basic role of ground and wall solidification:

1. In the early stage of decoration, the cement floor can be hardened, which can effectively avoid sand and ash on the cement floor and wall, so as to improve the quality of putty scraping and latex paint.

2. The ground solid is water-resistant and moisture-proof, which can avoid the deformation of the wooden floor caused by moisture erosion, and at the same time avoid "throwing ash" from the cracks of the floor in the future.

3. It can also be used for the curing of gypsum leveling ground.

4. The wall solid fully infiltrates the surface of the substrate, makes the base layer dense, improves the adhesion of the smooth interface, and makes the coating easier to apply in the later stage.

Ground solid is a kind of coating that acts on the cement floor, which is suitable for the closed treatment of the cement floor in the early stage of home decoration or engineering decoration. It can firmly block the loose particles of the cement floor, so that the ground forms a tight one.

Wall solidification is a wall curing adhesive, in fact, it is a kind of interface agent, which plays the role of connecting the upper and lower levels, consolidating the substrate and allowing other substances to cover it.

The functions of wall reinforcement are as follows:

What is the role and use of <> wall solid.

This material acts as a link between the previous and the next, making the base layer stronger and covering all other materials. For example, for the dust on the interface part, you can directly use it to cover it. At the same time, it also has strong permeability, which can fully infiltrate the base layer, thereby improving the adhesion ability of the wall.

In addition, it can also be used in wallpaper paving, which is very convenient for construction, and the surface is uneven or bulging.

In fact, the wall solid is the interface agent, which has the effect of fully infiltrating the surface of the base layer. Used on walls, the two interfaces can be connected together, increasing the reinforcement of the base layer and thus improving the adhesion of the coating. In addition, it is only enough to paint the wall, but also to solidify the floating ash on it, effectively reducing the probability of cracking and other phenomena on the wall.

What are the advantages of wall solidification.

1. The wall has good aging resistance, waterproofing, corrosion resistance, and air permeability. Painting it on the wall, it will not produce any toxic gas, and it has no smell and does not cause pollution to the environment, it is very green and environmentally friendly, and you can use it with confidence.

2. If the environment is too humid, the wall can also be used, in this environment, whether it is construction or subsequent hardening problems, there will be no trouble, and it is very convenient and fast to deal with.

Precautions for the use of wall fixing agents.

If it is stored for a long time, the wall may be layered, and even mildew will grow on it, but as long as it is stirred evenly before use, it will not affect the use effect. Also, when applying it to the wall, you should try to apply it as evenly as possible and don't miss out on what you don't paint.

The function of wall solidification is: wall curing, increasing the strength of the wall surface, and the adhesion of the wall surface.

The full name of wall curing should be called wall curing adhesive. Hearing its name, we can roughly judge its function and cure the wall. Wall solid, this is a kind of glue building material, its main role is to cure the wall, increase the strength of the wall surface, and the adhesion of the wall surface.

The wall solid is made of polymer through multiple processes, and its principle of action is the permeability of the polymer.

Wall fixing has only become popular in recent years, in fact, this kind of wall surface treatment has been available before. For example, the earliest one we used may be 108 glue, or an interface treatment agent, that is, an interface agent, which treats the wall with the same materials as the wall solid, and treats the wall to increase the strength and adhesion of the wall.

What are the construction requirements for wall reinforcement?

The first point is the requirement for the wall surface to be painted with solid walls. The surface of the base layer that needs to be painted should be basically solid, without any dust floating on the surface, and no oil stains are allowed. Otherwise, it will lead to the wall being unable to achieve the desired effect.

The second point is that we must follow the product instructions for wall fixing. For example, a brand of wall solid products requires the wall solid to be diluted with 20% to 30% water, and then painted on the wall with a roller brush; In addition, the requirements of a certain brand of wall reinforcement are different.

The third point is to pay attention to the temperature of the wall during construction. The requirements of wall solid products must be more than 5 before they can be used; At the same time, it is required that the wall solid is not mixed with other adhesive substances, or some adhesives of other brands to be used; And the wall that has not been used up must be sealed and preserved.

Wall solid is a strong adhesive, which is used for the reinforcement and repair of walls, floors and other parts of buildings. Its main functions are as follows:

Reinforcement of the wall: Wall solidification can re-coagulate and tightly connect the originally loose, cracked or damaged wall, enhance the overall stability and strength of the wall, and make it more durable.

Filling cracks: Cracks may appear on the surface of the wall due to factors such as temperature difference and moisture, affecting the aesthetics and durability. Wall solids have excellent caulking function, which can fill these cracks and bond them tightly together, reducing problems such as moisture penetration and dust accumulation.

Moisture-proof and mildew-proof: The wall solids form a tight protective layer after curing, which can not only prevent the wall from being damp and mildew, but also effectively isolate the invasion of bacteria and viruses and improve the sanitary quality of the living environment.

Fire and explosion protection: Some special requirements of the place (such as factories, laboratories) need to use fireproof and anti-explosion decorative materials, wall solid can become a strong flame retardant, fire retardant adhesive, to ensure the safety of the building.

Therefore, wall reinforcement is a very important building repair material, which has a wide range of application prospects.

Wall solid is a building construction material, usually made from a mixture of raw materials such as cement, lime, sand, etc. Its main function is to strengthen the wall, improve the seismic resistance and load-bearing capacity of the wall, and prevent the wall from cracking and deformation.

Specifically, wall solidification can play the following roles:

Enhance the stability of the wall: The wall solid can form a hard film layer on the surface of the wall, increasing the stability and load-bearing capacity of the wall. This is especially important for high-rise buildings or areas that need to withstand high winds or **.

Prevent cracking and deformation of the wall: During the construction process, the wall solid can fill the tiny gaps and cavities in the wall, making the wall tighter and stronger, thereby reducing the risk of cracking and deformation of the wall.

Improve construction efficiency: The use of wall reinforcement can speed up the speed and quality of wall construction, reduce construction time and labor costs.

In a word, wall reinforcement is a very important building material, which can provide reliable support and protection for buildings, ensuring the safety and stability of buildings.