How can the glue be wiped off after high temperatures???

Due to the small residue, it can only be found through the feel or close observation that this has a great impact on the baking paint, usually resulting in spraying not in place, empty spots and other phenomena;

In view of this phenomenon, the key is to control the quality of high-temperature resistant tape manufacturers, and must conduct sampling high-temperature tests before the batch supply of tape suppliers, and conduct preliminary screening tests on high-temperature tapes to meet the company's requirements before putting them into production;

Because the production of high-temperature glue belongs to the high-tech process, and the raw materials contain chemical components, plus the use of each customer's environment, coating equipment, technical requirements, production process, personnel operation and other factors, so it is inevitable that there will be abnormal phenomena in the production process, if there is a residual glue phenomenon found in the production process of the production line, the abnormal workpiece should be taken out immediately, stored separately, and at the same time, increase the inspection of the first product, through a period of time or a certain number of bad statistics, analyze the percentage of residual glue rate, Finally, according to the actual situation, this batch of tape is isolated until the root cause of the problem is found, and then it can be put into production;

For the residual glue workpiece that is found and isolated, it can generally be removed by wiping a small amount of Tianna water with a cotton cloth, or the same type of tape can be used to remove the tape residue;

Hello, no. After the glue dries, its viscous properties change and cannot be wiped off with water. If you want to wipe off the glue, you can use a solvent such as gasoline, dish soap, laundry detergent, etc., to dissolve the glue, and then wipe it off with a rag.

However, it should be noted that the solvent may damage the surface in the middle of spring, so it is best to try it in an inconspicuous place before using it to avoid irreparable damage.

Hello! Absolute <>

I am glad to answer for you, according to your question description, there are the following two types of glue that will not fall after high temperature: 1. Organic glue: including phenolic resin glue, polyimide glue, etc., this glue can be used in an environment of 400 degrees Celsius, with the characteristics of fire resistance, flame retardant, etc., and can be used in the case of a temperature of no more than 400 degrees.

2. Inorganic high-temperature glue: Compared with organic glue, this glue can withstand a higher temperature and can withstand a high temperature of 1800. In addition, the inorganic high-temperature adhesive not only sticks firmly, but also does not corrode the metal, and the service life is longer.

Summary. Dear, you can put the clothes in the refrigerator to freeze or use ice packs to ice it, wait for more than ten minutes, and the hard and hard hot melt glue can be manually deducted.

Dear, is the high-temperature glue you said a hot melt adhesive?

Dear, you can put the clothes in the refrigerator to freeze or use ice packs to ice it, wait for more than ten minutes, and the hard and hard hot melt glue can be manually deducted.

No, it's an industrial glue, which has to be 600 to 700 degrees to dissolve.

Wipe with a paper towel dipped in some alcohol (preferably industrial alcohol) and rub it a few more times to get clean.

Wipe with diesel and gasoline to wipe off the sticky industrial glue. Use absorbent cotton dipped in cooking oil, rub and rub the viscose, and you can easily remove the glue on the clothes. Use a cotton swab dipped in nail polish and absolute ethanol to remove the industrial glue that sticks to the clothes that cannot be washed off by soap.

Hot melt adhesive is a kind of plastic adhesive, which is more sensitive to heat, and the temperature difference of more than 10 degrees may cause the product to change, the higher the temperature, the more intense the molecular movement, resulting in the lower the strength of the glue, which will lead to the phenomenon of glue flow in high temperature weather.

Hot Melt Adhesive Selection Criteria.

1. The color requirements of the glue should be different. If there is no special requirement for the color of the substrate itself, then the color of the glue itself will not have much effect, and the common hot melt adhesive colors are yellow, coffee, dark coffee, white, and transparent.

2. The surface treatment of the substrate is carried out. The hot melt adhesive is not as strict as other adhesives on the surface treatment of the substrate, but the dust and oil stains on the surface of the substrate should also be properly treated to make the hot melt adhesive better exert its adhesive effect.

3. Work time. Fast work is a major feature of hot melt adhesives. The operation time of hot melt adhesive is generally about 15 seconds, with the wide application of modern production methods - assembly line, the operation time of hot melt adhesive should be 4, and the temperature resistance is discussed.

Hot melt adhesives are sensitive to temperature. When the temperature reaches a certain level, the hot melt adhesive begins to soften, and the hot melt adhesive will become brittle if the wheel bumps below a certain temperature, so the selection of hot melt adhesive must fully consider the temperature change of the environment where the product is located.

5. Sticky. The adhesion of hot melt adhesives is divided into early adhesion and late adhesion. Only if the early tack and the later tack are consistent can the hot melt adhesive be stable with the substrate.

In the production process of hot melt adhesive, it should be guaranteed to have antioxidation, halogen, acid and alkali resistance and plasticity. Depending on the material of the substrate, the viscosity of the hot melt adhesive is also different, so different hot melt adhesives should be selected according to different materials.

Kiss! Hello, happy to answer your <>

How to remove the glue on the electrophilic blanket is as follows:1. Use banana water to drop on the glue stain, and at the same time use an old toothbrush to stir constantly, until the glue becomes soft and takes off, then rinse with water, brush repeatedly, and brush until it is clean.

Put an absorbent cloth on the back of the garment with glue marks, then apply some white vinegar to the glue marks, and finally scrub it clean with cotton dipped in water2. Drop 502 in place to melt the original 502, and then quickly wash it off with water, very smart! 3。

With insulating oil, pour some insulating oil in the transformer on the table, and the 502 glue will quickly become soft and can be rubbed off quickly. I hope I can help you <>

Do you have any other questions?

How to remove glue from clothes.