Hello, does Konka LCD TV LED50U60 have a network cable interface? The network cable can be connected

Hello, we are happy to answer your questions.

This Konka50U60LCD TV is equipped with 4 coreA7 architecture CPU+Mali450GPU,The TV runs very well,The picture quality is delicate,Then this TV has a built-in wireless network card,You can connect wirelesslyWiFi,Of course, you can also connect the network cable as you said,TV built-in Ethernet and HDMIInter,Meet the use of your wireless and wired connection。 Of course, I suggest that if the wireless router is not far from the TV, it is more convenient to use wifi connection, and the rate loss rate is relatively low, if it is too far away from a few walls, you can consider connecting the network cable from the wireless or wired router, plugging in the TV Ethernet interface, which has ensured a better rate**program.

Konka led50r5100de TV how to connect to the network cable to the Internet, no CCTV, there is a router, detailed operation, thank you.

Konka led50r5100de TV how to connect to the network cable to the Internet, no CCTV, there is a router, detailed operation, thank you! Hello, happy to answer your <>

Pro-Konka led50R5100DE TV connection network cable to the Internet, no CCTV installed, there is a router, detailed operation, as follows: Hello, led50R5100DE is Konka third-generation network TV, the connection network supports wired connection, wireless connection, please correspond to the following operations: 1. Wired connection, please operate as follows:

1. Wired connections need to match: routers, network cables, computers, and network TVs; 2. First of all, the router and the computer can be connected to the network normally (please set the IP of the computer to automatically obtain first; After that, connect the computer and the router), and then connect one end of the network cable to the router and the other end to the network interface of the TV; 3. TV menu - network settings - wired settings, IP type Select automatic get, and finally click Settings.

2. Wireless connection, please operate as follows: 1. Wireless connection needs to match: wireless network card, wireless router, computer, network TV 2, wireless router and computer can be connected to the network normally, please connect the wireless network card to the TV; 3. TV menu-Network Settings-Wireless Settings-SSID(Search for router devices)、Encryption type(Same as set on the computer)、IP typeSelect automatic getting,Finally, click Settings。

3. When the wireless connection cannot be connected, pay attention: 1. Please confirm that the wireless router and wireless network card used are normal and can be used 2. The signal strength of the wireless network is too low (when the wireless network strength you use is less than 35%, although our machine can detect the network, it cannot be successfully connected.) In order to ensure the normal use of the wireless network, the signal strength is required to be stable at more than 70% or more than two bars.

Hope mine can help you <>

Do you have any other questions?

If you can,Check out the manual,If the TV has this function,Then there must be a description of how to use it in the manual。

The following is the information found online:

Dear Konka users:

Hello, thank you very much for your support of Konka products, Konka led50R5100DE TV does not have built-in wifi function, you need an external wireless network card to use wireless network, wireless network card is recommended to use the chip model RTL8191, RTL3070, RTL8712.

When setting up a wireless router, you need to pay attention to the following points: Envy draft.

1) Wireless routers can only use the following two encryption methods: WEP and WPA.

2) Use WEP encryption mode, set as follows: open for authentication mode, 64bit for wep encryption, ASCII for key mode, any one key can be set, and the password needs to be set to 5 digits.

3) Use WPA encryption mode, set as follows: TKIP as password type, PSK ESK as PSK, and 8 digits for password.

Note: The password is recommended to use the numbers 0-9 for easy identification).

First, the router and the computer can be connected to the network normally (when wired connection, please set the IP of the computer to automatic data acquisition; Connect the computer and the router, log in the router, generally on the back of the router, such as: etc., after entering the **information,), connect a network cable to the router at one end, connect the network interface of the TV at one end, cut off the power of the TV and restart, enter the TV system settings - network - wired - IP type automatic acquisition - setting - network detection.

Plug in an Internet cable or connect wirelessly.