What problems should be paid attention to when maintaining home elevators?

When maintaining household appliances, you should wipe him for a long time, and give him some lubricating oil regularly.

What problems should be paid attention to when maintaining home elevators? Then there should be a maintenance introduction in this area when installing the elevator!

When maintaining the elevator, it is necessary to think about frequent maintenance, and the elevator should be tested by relevant personnel, so as to ensure the effective operation and safety of the elevator.

When maintaining home elevators, we must pay attention to the smoothness of the opening and closing of the elevator door, as well as whether the average speed of the elevator running speed is smooth.

The number of villa elevator maintenance depends on the frequency of your use, and the cost and number of on-site maintenance of each manufacturer have their own regulations.

Home elevators need professional maintenance, and Schindler is recommended to install home elevators.

For villa home elevators, Schindler can tailor a professional elevator maintenance plan according to the customer's specific use of the elevator, establish an elevator file, and avoid frequent maintenance to cause trouble to customers. Appointment-based maintenance services provide convenience to customers. Click Get Plan & **

About the maintenance of home elevators:

1. Professionals regularly visit for maintenance. Maintenance professionals are required to inspect, repair, and replace the equipment parts in the elevator operation through professional equipment to ensure the safe operation of the elevator.

2. Lubrication and maintenance of mechanical parts. Whether it is a screw elevator or a traction elevator, lubricating oil is a necessary maintenance product. After using it for a long time, its work efficiency.

It will decrease, and the noise will increase, so increasing the lubrication of parts is also the maintenance of the elevator.

3. If the home elevator is found to be faulty in daily life, it is recommended that the owner contact the manufacturer directly for door-to-door maintenance.

The exhibition center of the headquarters is composed of a professional customer service team, which serves customers 24/7. We are committed to listening to the needs of customers through various channels, enthusiastically and efficiently assisting customers to solve various problems, and escorting customers to use our elevator products with peace of mind.

1. Maintenance of mechanical parts of household elevators: 1. The traction machine of the elevator needs oil lubrication. There are two scales on the outer cover of the traction machine, open the grease nozzle to see that the oil should be in the middle of the two scales, if the oil is lower than the scale below, it means that the traction machine should be refueled, if you do not refuel, the elevator will not be well lubricated for a long time, which will lead to the burning of the elevator traction machine and the motor.

2. Cleaning and lubrication of elevator car guide shoes. We all know that the guide shoe runs on the guide rail, and there is an oil cup on the guide shoe, so that the elevator does not produce friction sound in operation, it is necessary to regularly refuel the oil cup and clean the guide shoe, and the hygiene of the car should be cleaned. 3. Maintenance of elevator hall doors and car doors.

Elevator failures are generally mostly on the elevator hall door and car door, so attention should be paid to the maintenance of the hall door and car door. First, the upper sill of the door should be refueled in the place to refuel, keep good lubrication, the elevator will not make unpleasant sounds in operation and the opening of the door. Second, the maintenance of electrical parts of home elevators:

The electrical components of the home elevator are roughly divided into control panels, electrical switches of each safety circuit, etc., it is the brain of the elevator, the central nervous system of the elevator, and the starting, running and door switches of the elevator are dominated by it, so it must be treated as a priority in the daily maintenance work. It is best not to short-circuit the elevator circuit in the control screen during work. When the elevator door system fails, someone shorts the elevator door for convenience, so as to find the fault, which is very dangerous, if the elevator is found to be very faulty in daily life, then it is recommended that the owner should contact the manufacturer directly for door-to-door maintenance.

Generally, by observing the operation status of the design, checking and simply covering up, we can find possible problems in time, especially where the elevator needs to be used frequently, and it is recommended to carry out routine observation and maintenance every two weeks. This is routine maintenance.

Regular maintenance is to carry out detailed inspection, repair, replacement and adjustment of the parts of the equipment, so as to make the equipment reach a high-quality state, such as lubrication and maintenance of mechanical parts, which is not only to improve the working effect, but also to reduce loss and noise.

Under normal circumstances, maintenance is carried out once a year, one is to check whether there is any abnormal noise? Is the current normal? As well as a lubrication, steel strip wire rope inspection, two years can do a load test.

The maintenance of home elevators requires annual inspection of elevators on a regular basis every year, as well as regular lubricating oil on some lubricated parts.

The maintenance procedures and procedures of home elevators and other elevators are the same, you need to find those professional personnel to give you elevator maintenance, which brand of elevator you are, you directly call the elevator manufacturer's goods collection service to maintain.

Home elevators should be in accordance with the maintenance specifications, every year to find professionals for inspection and maintenance, the safety of the elevator is directly related to the safety of people, must be taken seriously.

This still needs to be done by professionals, and you can't do this kind of maintenance yourself, unlike cars.

1. Add lubricating oil to the home elevator traction machine.

If you don't refuel, the elevator will not be able to run smoothly for a long time, which will lead to damage to the elevator traction machine and motor. Therefore, it is necessary to load the elevator in real time for oil change to protect the traction machine of the elevator smoothly.

2. The elevator car guide rail is clean and smooth.

As we all know, the guide shoe runs on a guide rail, and there is an oil cup upstream of the guide shoe. In order to ensure that the elevator does not have conflicts during operation, the oil cup is forced to feed oil regularly, and the guide shoes are cleaned and the carriage is cleaned.

3. Adjustment of elevator hall door and car door.

Most of the elevator failure problems are due to the elevator hall door and car door of the elevator, so special attention should be paid to the adjustment of the elevator hall door and car door. The first choice is to refuel at the refueling location on the upper shelf to ensure a smoothness, so that the elevator will not make unpleasant noise when running and opening the door, pay attention to the inspection of the elevator safety touch board or light curtain touch board switch line. The switch line will be damaged by the frequent opening and closing of the elevator door.

This is a condition that maintenance personnel must check in every job. Changes must be made in advance, and users should not doubt the quality of the elevator product due to problems with the door.

Electrical parts recuperation:

The main idea of electrical components is divided into control panels and electrical switches for various safety circuits. It is the brain of the elevator and the central nervous system of the elevator. It controls the start-up and operation of the elevator and the switching of the door, so it is used as the main inspection site in the maintenance work.

It is best not to short-circuit the elevator circuit in the control panel during operation. When there is a problem with the elevator door system, some people short-circuit the elevator door for convenience in order to find out what the problem is. It is very dangerous, with the most accidents at the short circuit gate.

1. From the maintenance of the nuclear bureau of the computer room, the operating parts of the computer room, the key components, the runners in the control cabinet, as well as the circuit boards, the connection of the circuits, and the use environment of the computer room, are checked one by one, and this maintenance takes about 1 hour.

2. For the maintenance of the hoistway, all the spare components of the hoistway, including all the electrical components, are checked one by one.

3. For the inspection of the imitation pit, all the pit safety buffers are inspected. Do all these three steps carefully, and the maintenance of the elevator will be safe and in place.

<>1. Start the maintenance from the computer room, the running parts of the computer room, the key components, the runners in the control cabinet, as well as the circuit board, the connection of the circuit, and the use environment of the computer room, are checked one by one, and this maintenance takes about 1 hour.

2. The maintenance of the well is checked one by one for all the hall infiltration components, including all electrical devices.

3. The inspection of the pit, all the pit safety buffers are inspected. Do all these three steps seriously, and the maintenance of the elevator will be safely in place.

The elevator maintenance methods are: 1. Regularly inspect and repair the elevator and replace the damaged parts in time; 2. Clean and lubricate the wire rope and car guide shoes of the elevator to prevent the wire rope and car guide shoes from accumulating dust and aging; 3. Lubricate the elevator door frame to reduce the wear and tear of the elevator door on the elevator door; 4. Clean the walls and floors of the elevator regularly every day to keep the elevator clean and tidy. 5. Check the safety touch plate of the elevator or the contact plate switch line of the light curtain type.

In the process of elevator use, the wire rope should be cleaned and lubricated in a timely manner. Lack of maintenance is one of the main reasons for the short life of wire ropes. In the elevator regular inspection, the inspector often finds that the surface of the traction wire rope has a layer of oil stains, which is formed by mixing the lubricating oil and dust that seeps out from the wire rope, if not cleaned in time, it will not only affect the service life of the wire rope, but also change the friction coefficient of the traction rope in the traction pulley groove, reduce the traction capacity, and in the case of light or heavy load of the car, it may cause the traction rope to slip and cause the car to rush to the top or squat to the bottom.

Normally, most of the new wire ropes are already lubricated during production, but during use, the loss of lubricating grease is reduced. In view of the fact that lubrication can not only play a role in the corrosion protection of the wire rope during transportation and storage, but also reduce the wear between the wires, between the rope strands and between the wire rope and the traction wheel groove during the use of the wire rope, and it is also very beneficial to prolong the service life of the wire rope. Therefore, in order to minimize the harm of corrosion and wear to the wire rope, it is necessary to carry out lubrication inspection.

First of all, we must choose the appropriate wire rope grease, elevator wire rope grease should use a certain coefficient of friction special grease, high-performance wire rope grease is the fundamental guarantee for maintaining the wire rope to extend the life of the wire rope. When the wire rope is working, there is a three-dimensional fretting friction inside, which requires that the wire rope grease must have strong permeability, that is, the lubricating oil molecular anti-wear agent components in the lubricating grease can penetrate into each steel wire. In addition, the wire rope grease must also have strong adhesion properties to ensure that it adheres evenly to each wire rope.

Usually there are several ways to lubricate and maintain the wire rope, one is to disassemble the steel pin ear wire rope and soak it in lubricating oil at a temperature of 80 100 degrees for about 2 4 hours, and the other is to use a brush to brush the lubricant directly on the wire rope, the key is to master the method and interval of brushing.