What should I do if the MP4 is stuck when it is turned on when it is updated?

Hello, happy to answer your questions, have found the answer for you, if your mp4 is stuck, you can try the following methods:

1. Restart MP4: Press the power button on MP4 and hold it for a few seconds until the device turns off. Press the power button again to restart the device. This bench may solve some minor problems. Clause.

2. Reset MP4: Look for the "Reset" or "Reset" button on the MP4, press and hold it for a few seconds until the device turns off. Tong Zhongkuan pressed the power button again to restart the device.

This method may clear some data, but it can solve some of the more serious problems. Clause.

3. Connect to the computer: Connect the MP4 to the computer to see if the device is detected. If the device is detected on your computer, you can try backing up your data and reformat your device. Clause.

4. Delete files: If MP4 is stuck, it may be caused by a certain file. Try deleting the files that were recently added to your device and then restart your device.

If none of the above methods can solve the problem, there may be a problem with the hardware of the device. It is recommended to contact the MP4 manufacturer or after-sales customer service for repair or replacement.

All electronics have a good way to hold down the power button and don't let go. Then he will shut down. It's equivalent to a forced power outage. And then you take that half a minute, and you turn it on, and then you turn it on.

Take it to a repair shop for repair **There is a specific solution The reason for this should be a problem with the system and battery.

How can I get MP4 stuck on the boot interface all the time? If there is a restart button, restart it. If you can't turn off the phone, you can try it after the power is consumed, or you can flash the firmware, there are many reasons, and the solutions are just a few of them. *

First, the quality of the screen itself, caused by the main control IC and other poor welding, slight bumps caused by such situations (can only go to the warranty point or Bi disturbance maintenance point to return to the factory).

2. Due to bumping, bumping, falling, regretting or not buckling during installation, etc., the wiring caused by it - that is, soft PCB or power strip.

of loosening. This problem is not big, that is, there is no data in the data area or the data transmission is incomplete, but there is current, although the screen is bright, there will be a crash, white screen, blue screen, red screen, black screen.

But the data is not displayed or semi-displayed, garbled.

Because the data of the screen is output by the orange clear main control IC through the power strip and soft PCB - that is, the cable input to the screen, in this process is the most likely problem is the power strip. (If you're confident in yourself, check the strip yourself.)

3. Without bumping, bumping, or falling, there is a sudden crash, white screen, blue screen, red screen, and black screen. Generally speaking, it is your firmware problem, this is the process of installing the firmware, 1First, find the same firmware as your mp4 brand online (preferably from the official website)**.

3.If you can't turn on the MP4, press and hold the "M" key of the machine and connect it to the computer until the Device Manager appears.

If the MP4 is stuck or there is an abnormal situation, you can try the following methods to fix it:1Restart your device:

Try holding down the power button for a few seconds to restart MP4 and see if that fixes the issue. 2.Formatted storage:

If a file system error occurs in MP4, you may need to format the storage. However, before formatting, be sure to back up all the data in the storage to avoid losing the data spine. 3.

Update Firmware: If there is an issue that is due to a software issue on your MP4 device, then you can try to update the firmware version. 4.

Charge the Imperial Tomb: If the battery is too low, the MP4 may also be abnormal, so you can connect the device to a power adapter or computer to charge it and try to turn it back on. 5.

Factory reset: If none of the above methods can solve the problem, you can consider doing a factory reset, but again, you need to pay attention to all the data in the backup storage. A factory reset will erase all data on your MP4 and restore the device to its factory state.

If none of the above solves the problem, you may want to consider sending your device in for repair or replacement.

It should be your mp4 flash is broken.,If it's broken, you can't call the book! It usually costs 30 quick money to take it to Vipei for repair. The mp4 I bought before also had this kind of problem.

Take it for repair, the master said that the flash was broken, and it cost 30 yuan. It was fixed in an hour!