Why is the display illegible? 10

1. There is a problem with the monitor.

2. In the desktop anti-mouse - properties - settings - advanced - monitor - screen refresh rate there one by one tune is too fast.

3. The interface between the display and the graphics card is not in good contact.

4 system reasons.

You can take a look at the letters of the boot detection to see if it is not clear, and if it is, change to a different version of Windows XPIf the letters detected on boot are not clear, then your laptop is broken.

The refresh rate can sometimes affect the clarity of the display, so try adjusting the refresh rate a few more times to see if it improves.

Your monitor or graphics card does not support high resolution or the signal lines are not in good contact.

Hard drive repartitioning Format After installing the Chinese version of Winxp

It may be that the machine is damp and placed in the sun.

Pay attention to unload the machine frequently and clean up the dirt inside, (main chassis).

Both XP and 2000 can be used, with strong stability and not easy to crash. Change to SP2

Reinstall the latest Chinese version of Win XP

1 Reload 98

2 Reload XP

3 What's not working yet, just change it.

Check the display first, then adjust the brightness and refresh rate to see if it works.

The driver for your monitor or graphics card may not be installed or correct.

The problem with the display or the reason why the resolution is not adjusted properly.

There may be something wrong with the monitor.

If it's a display problem, there's no way to do it, such as defocusing. Teach you to set it up, if you are a flat monitor, just go to the desktop right click - properties - settings - adjust the resolution to 1024*768, and then click advanced - monitor - adjust the refresh rate to 75mzh, other monitors can also be adjusted in the same way. Give it a try.

LCD? It could be a graphics card issue. Or maybe you're having a problem with the resolution setting.

How much resolution have you turned up?

Is it a screen-only display? If it's not LCD, prove that your monitor is of age, and get ready to change it.

It has nothing to do with the graphics card, it should be that the driver is not installed properly.

The next driver wizard, just update the graphics card driver.

It's a problem with the graphics card driver, or it may be a problem with the resolution, the resolution is low or the best resolution of the display is not reached, and the displayed words or images are of course not clear.

Generally, liquid crystal has an inherent resolution, you can check what the inherent resolution of your display is, and the resolution of the machine is set to the natural resolution of liquid crystal, and the effect is the best, not that the higher the resolution, the clearer.

There's an auto button on the monitor, and if you press it and it makes the monitor adjust automatically, if the computer sets the best resolution for the monitor, then it will be very clear after automatic adjustment.

There are two reasons why a computer screen may display blurry fonts

1. The screen resolution is set incorrectly.

2. The graphics card driver is not installed or installed incorrectly.

Screen Resolution Setting Error Workaround:

1. Right-click on the blank space of the desktop.

2. Select the screen resolution in the context menu.

3. Find the resolution in the pop-up dialog box.

4. Click the drop-down button.

5. Select the appropriate resolution in the drop-down menu, generally select the one recommended by the system, and then click OK.

6. If the size displayed on the desktop is not suitable, select No when asked whether to save it. Repeat item.

7. If the size of the desktop content is suitable, click to save the changes.

Reinstall the graphics driver:

2. Open the software.

3. Find the update driver in the software.

4. Update the driver.

5. Restart your computer.

Hello, for your case, there may be several scenarios:

1.If there are magnets affecting the display, please check whether there is any magnet interference within 1 meter next to the display. In the absence of magnet interference, please degauss, degaussing several times.

2.If degaussing does not work, it is possible that the inside of the display is not working properly due to dust or moisture, and you can directly use a powerful fan to fan the small hole in the back for a few minutes.

3.If there are no holes in the back of the monitor, or if step 3 is still useless, you can remove the monitor yourself and blow it into the dust. Do not use a damp cloth to remove the plaster, it may cause electricity leakage.

Note: Remember to keep the display parts, if you drop it, you have to match it, it will be troublesome! ）

4.If the above three points do not work, please take the monitor to a professional place to repair the computer, do not take it to those unprofessional small shops, so as not to make the small problem big.

1. Right-click on the blank space of the desktop and select Personalization - Display;

2. Click "Adjust cleartype text" in the upper left corner;

3. Check "Enable cleartype", confirm the enablement, and click Next.

4. Complete the adjustment.

Via NVIDIA graphics card settings.

1. Right-click on the blank space of the desktop to open the "NVIDIA Control Panel".

2. Open the management 3D settings, find "Smoothing-FXAA" under the global settings, check whether it is enabled, and turn it off if it is enabled;

3. If you don't want to modify the global settings, add the browser path under the program settings, and then turn off the "Smoothing-FXAA" below.

There are two possible scenarios for blurry text opened on a computer:

1. The text belongs to the ** type, and the quality itself is not high, resulting in blurred display;

2. The resolution of the computer monitor is too low, resulting in unclear display.

If all documents opened by the user are blurry, then it is likely that this is the second reason, and it is recommended to set a higher resolution.