Is it good to use a matte film for iPad Air

iPad is recommended not to apply film, first of all, the ipad is made of bulletproof glass, which is very hard, and it is difficult for nails and sharp metal to leave scratches on the top, so there is no need to stick the film, and secondly, the frosted film can disperse part of the light, so it will look darker, which is not conducive to power saving. And some people have proved through experiments that things that can cause damage on the ipad screen can easily cut through that thin film, but the film is not useless ipad is afraid of sand, because sand is a crystal with high hardness, which can leave scratches on the glass, but the tablet is not a skateboard, I believe that no one will put it on the floor to rub, in short, it is not recommended to stick the film, you insist on sticking, it doesn't matter.

The film will reduce the user experience, if there are special circumstances, it is nothing, the film should be chosen:

1。Non-frosted.

For a long time, the traditional market so-called"Anti-fingerprint protective film"All of them are matte matte,At most, it can only produce a "shallow fingerprint" effect,From a specific angle, it is possible to see fingerprints or oil residues on the screen surface; This time, Fujimori Industry has developed a new product and is coated with special nano raw materials, so that no fingerprints or oil stains can be seen from all angles, realizing the real significance for the first time in the history of the protective film industry"Zero fingerprints"Effect.

2。Maintain anti-glare function.

3。Diamond embellishment, under the general lighting, will sparkle, eye-catching, presenting the most luxurious scene, is the first choice of fashionistas.

4。Anti-scratch treatment on the surface (3h).

5。Using silicone, fast exhaust, no bubbles.

Dear users, iPad matte film is a relatively common protective film, which can effectively protect the screen of iPad from scratches and stains. However, for the question of whether the frosted film can be washed with water, we need to judge it according to the specific situation.

First of all, if you are using a high-quality matte film, then it is generally washable. This is because the high-quality matte membrane uses special materials and sensitive process, which has strong waterproof properties and can be used underwater. However, even if it is a high-quality matte film, it is not recommended to soak it in water for a long time, as this will affect its lifespan.

Secondly, if you are using a low-quality matte film, then washing is not recommended. Because the low-quality grinding stool mountain sand film often uses more common materials and processes, the waterproof performance is poor, if soaked in water for a long time, it may cause the frost film to fail, and even affect the service life of the iPad.

In short, if you want to wash the iPad matte film, it is recommended to first understand the quality and waterproof performance of the matte film you use, if it is a high-quality matte film, you can wash it properly, but do not soak it for a long time; If it is a low-quality matte film, it is best not to wash it with water, so as not to affect the use effect.

I didn't pay attention to the self-contained film! That's probably not a membrane!

I bought the air a few years ago, and I spent money to buy the film, almost 200 yuan, and he gave it for free!

Apple has made the screen so good (and it feels so good) that you even put a film on it. I floated naked all the way.

Nope! The landlord is delusional

It is recommended to apply a film, which can prevent the iPad screen from being damaged and play a protective role.

Film method: 1: Preparation before filming.

Clean up the dust, oil stains, etc. on your hands first.

Paste high permeability film, or paste matte film? Advantages and disadvantages often coexist, high transmittance film can reach more than 95 light transmittance, on the image quality, pixels, brightness has little impact, but the full screen fingerprints, oil stains, sometimes miserable, poor aesthetics. The frosted film can effectively reduce the visual perception of fingerprint residue, but it affects the image quality to a certain extent, resulting in a sense of visual haze and affecting the experience.

Two: Check if the appearance of the new film is the right size for the iPad.

Tear off the original foil and set the iPad aside while we open the new foil to see if the packaging is complete.

Generally, a wiping cloth is installed inside the film, which is set aside for later use, but it is best to prepare another one. Place the new film on the iPad to see if the connector fits perfectly.

Three: Clean the screen.

Use the included wiping cloth to spray the screen cleaner to wipe the surface of the iPad (you can replace it with clean water) to clean the fingerprints, dust, etc. on the surface. In this step, it doesn't matter if you don't have glasses or camera lens cloth, we can find a soft cloth that doesn't shed lint instead. If the screen is too dirty, you can clean it with a non-corrosive cleaning solution, and do not use alcohol and other corrosive liquids to clean the iPad screen.

After cleaning, use another cloth, this time remember to wipe again if it is dry, of course, in the process of wiping must only wipe in one direction, otherwise it will leave static electricity and adsorb dust.

After wiping, it is necessary to insist on whether there is dust on the screen in a well-lit place, and it is necessary to check it many times, of course, it is best to choose a place with less dust in the environment of the film.

Four: Ready to start.

First of all, check the front and back of the film, never stick the opposite direction, and see the two labels on the film.

Peel off the protective film and start with the Home button or the side above the front camera notch. Then align the notch with the home button, and align the top and left metal edges to apply the film. When applying the film, try to maintain a constant speed, but the speed must be fast.

If there are bubbles, please pull back less to ensure that there are no bubbles on the surface of the film.

Five: follow-up work.

After pasting, if there are bubbles, it is best to use the cloth that has just wiped the screen to wrap a slightly harder card, such as a bus card, bank card, etc., which is too short and easy to produce bubbles in some areas. Slowly press the film on the surface of the iPad with the wrapped tool, and there will be few bubbles even if it is generated. If there is dust, you can use tape to pick up the dust under the film, remember to be very careful with this step, otherwise it will damage the film.

After the above steps are completed, the iPad film is completed, the whole process needs to be carefully repeated by the user, and it is easy to perfect the iPad film with some patience.

Not very needed.

Tempered film. The function is only to protect the screen from shattering under a certain height (impact with a certain force), but when the impact is insufficient, the screen will not break even if there is no film, and when the impact is too large, the screen will still break even if there is a film.

If it will not be dropped and collided often, the tempered film will only deteriorate the use experience, and increase the overall size of the iPad, weakening the design purpose of the thin and light iPad.

iPad generally uses a protective cover with a protective cover, which covers the screen when it is not usually applicable, and it has played a protective role, and there is no need for tempered film for secondary protection. If you don't like the thickness of the protective case, you can consider using tempered film instead of protection, but in terms of protection ability, the protective sleeve is better.