For a new hard disk, is it feasible to connect the old hard disk to the new hard disk as a slave dis

Partition first, then format. It's ironclad, especially for new hard drives, and nothing can be installed without partitioning.

It's still 98, what's the matter?

None of them are used now.

Let's have an XP.

If the new hard disk is not partitioned, it cannot be directly installed with the 98 operating system. Therefore, you can install it after using software or fdisk partition and formatting it with format. However, it may be more suitable for your machine to run XP, and the system disk is completely sufficient for 6 Gs.

Partition first, then grid by grid! Now there are fewer 98 loads, and they are generally loaded with XP! If you install 98, 5G is enough for C disk! XP is actually 6G enough, but it is generally divided into 10G!

98 Ah... It's no problem, but like upstairs, it's true that XP will be better.

As for the partition, it will be very slow to use 98 grids, and 98 comes with fdisk does not support 80G, you need to use windows me to start the disk in fdisk.

However, I recommend that you use 2000 XP to install the disc boot partition, remember not to continue the installation but to exit after the partition, and then install 98.

There are also only FAT32 or FAT16 file formats, NTFS file format 98 is not supported.

It seems that your configuration is low enough, otherwise you wouldn't use a 98. Partition first, then format.

Divide the area first, and then cut it.

Partition first, of course. Waste of 98. What configuration yours is.

A. A hard disk is a kind of storage device that stores computer data, which stores data on a fixed disk, and the surface of the disk is divided into a number of tracks, each track is divided into multiple sectors, and each sector holds several bytes of data. Hard disks are usually divided into two types: internal hard disks and external hard disks, internal hard disks are hard disks that are installed inside the computer host, and external hard disks are hard disks that are independent of the computer host and can be placed outside the computer, usually in the form of mobile hard disks or hard disks.

Is the portable hard drive one or the other?

It's a piece, oh dear, it's the same as a hard drive.

I also want to ask if it's okay? Does the total amount of data refer to the size or footprint of the property?

Data capacity refers to the capacity of the hard disk.

Generally refers to the space that is not occupied.

Summary. Dear, hello, I'm glad to answer for you: put the 1T old hard disk in the mobile hard disk box, and then add the 2T hard disk in the notebook, can you transfer the data from the old hard disk to the new hard disk?

The application can find the data, answer: pro Put the 1t old hard disk in the mobile hard disk box, and then add it to the 2t hard disk in the notebook, you can transfer the data from the old hard disk to the new hard disk The application can find the data, oh, the motherboard hard disk of the general computer has two interfaces, connect the previous hard disk to another interface of the motherboard with a data cable, and copy the hard disk directly to the hard disk when you boot it. Thank you for your patience.

If you are satisfied with my service, please give a thumbs up, and once again wish you all the best! Peace and joy!

Put the 1T old hard disk in the portable hard disk box, and then add the 2T hard disk in the notebook, can I transfer the data from the old hard disk to the new hard disk? The app can find the data.

Dear, hello, I'm glad to answer for you: put the 1T old hard disk in the mobile hard disk box, and then add the 2T hard disk in the notebook, can you transfer the data from the old hard disk to the new hard disk? Can the app find the data?

Put the 1t old hard disk in the mobile hard disk box, and then add the 2t hard disk in the notebook, you can transfer the data from the old hard disk to the new hard disk The application can find the data, oh, the motherboard hard disk of the general computer has two interfaces, connect the previous hard disk to the motherboard with a data cable to another interface, and directly copy the hard disk to the hard disk when you boot it. Thank you for your patience. If you are satisfied with my service, please give a thumbs up, and once again wish you all the best!

Peace and joy! You don't need any apps, just copy and paste.

Select the Chinese email and transfer it to other hard drives.

The old hard disk can be used as a slave disk. The premise is that the motherboard supports the interface of the old hard drive.

1. The old hard disk is SATA interface, and only needs to be connected to other interfaces on the motherboard except interface 1 with another SATA cable, all of which are from the disk (the main disk should be connected to the SATA1 interface is the main disk, if it is connected to other interfaces, it is necessary to enter the BIOS, and the interface can be selected as the first boot priority device to become the main disk).

2. If the old hard disk is an IDE interface, it needs to be connected to the IDE interface on the motherboard, but most of the motherboards on the market no longer use the IDE interface. Before installing, make sure your motherboard supports it.

3. Although the old hard disk can be used as a slave disk, if the hard disk interface is too old, it will affect the performance of the host, so it is recommended that if the old hard disk interface is too old, it is still not a slave disk.

Yes, the serial port hard disk will automatically act as a slave disk when it is connected.

Don't throw away the old hard drive, you can change it to a portable hard drive to use.

No problem, what's wrong with this?

Use partitions, how to divide it depends on your preferences and the size of the hard disk (a main partition installation system 50g 100g or so and the other is divided into expansion partitions), sockets you need to check your motherboard model, each socket should be different, divided into sata, sata2, sata3, depending on which port your hard disk is sata, just plug it in.

The partition is still better, and the system and daily files are more clearly separated

1.Both are big brands and are okay.

2.Your board is a satatiii interface The difference between the third generation and the second generation is the theoretical transfer speed There is not much difference between the two plugged in Unless you test it with test software, consider the cost performance of the overall computer and the current hard disk ** is high 2 generations **moderate can...

3.The black disk is larger than the blue disk and the green disk is greater than the green disk

The green disk speed is 5400-7200, the cache is small, and it is mostly used for monitoring, or the home blue disk speed is 7200, the cache is moderate, and the common language is used at home.

The black disk is an enterprise-class hard disk with high speed, large cache, stable and high overall quality4The power consumption of a hard drive is not enough.

The performance of Seagate is better, the stability is still Western Digital, and the mainstream hard disks are SATA3 excuses. The blue disk is balanced, the green disk is energy-saving, the performance is not good, the black disk performance is better, and the power supply should be okay as long as it is not a miscellaneous brand.

1) If the fault is caused by a newly installed computer, a new hard disk, optical drive or other IDE equipment, please check whether the master-slave jumper setting of the hard disk is set incorrectly, because improper setting of the master-slave jumper will cause the system to not correctly identify the two IDE devices installed on the same IDE interface.

2) The BIOS does not recognize the hard disk, first try whether the system can boot from the floppy drive, if the floppy drive cannot boot the system, it is likely that the motherboard and power supply are faulty.

3) If the floppy drive can start the system, the system still can't recognize the hard disk, generally caused by hardware failure, please open the case, boot to listen to whether the hard disk is rotating, whether the rotation sound is normal, if the hard disk is not rotating, please check whether the hard disk power cord (large four-pin plug, four wires are yellow, black, black, red) is plugged in, you can change a large four-pin plug, pull out the hard disk data cable to try, if the hard disk still does not rotate or the rotation sound is abnormal, you can determine that it is a hard disk failure.

4) If the hard disk rotates and the rotation sound is normal, check whether the hard disk data cable is broken or has poor contact, it is best to change to a good data cable.

5) If there is no fault in the data cable, check whether there is a broken needle or poor contact between the hard disk data cable interface and the hard disk interface of the motherboard.

6) If the system still can't recognize the hard disk, please have another machine to check the hard disk, you can confirm whether it is a hard disk failure, if the hard disk is trapped, please replace or repair the hard disk.

7) Check the hard disk on another machine to confirm that the hard disk is in good condition, the motherboard should be further checked. You can remove the optical drive and the second hard disk, and plug the hard disk into the IDE2 interface of the motherboard. If the system can boot without the optical drive and the second hard drive, the fault is due to insufficient power capacity of the power supply; If the BIOS of the IDE2 port of the motherboard can identify the HDD, the IDE1 interface of the motherboard is damaged.

8) If the two IDE interfaces of the motherboard are damaged, you can connect an external multi-function card to the hard disk, and the CMOS parameters must be modified to connect the multi-function card to the hard disk, and it is forbidden to use the motherboard (on

board).