Desktop upgrades, add memory, and understand the coming in

If you want a dual-channel, 2g, you're going to throw away the existing 512 and buy a brand, two of the same

It is recommended that for your machine, just buy a 1G DDR memory, it's expensive, and it's useless to upgrade to 2G

Supplement, you can't use DDR2, what you said**should be DDR2 memory**, not DDR, figure it out first, don't spend money in vain. And, to be honest, in my experience, you shouldn't support dual-channel, and dual-channel doesn't improve performance much.

What brand of NF4(X)K8MC

Some boards use DDR generation, if so, it is not recommended to upgrade!

If it's DDR2, 1 root and 2 G's will do!

The motherboard supports dual channels'I'm not too interested in this, I don't feel the speed obviously! My wrench is supported.,But with 2 1 g.,It's not as fast as 1 2 g.,Regret it.,Personal opinion.,If you have a buddy in the computer company, you can feel it on 2 1 g first!

You confirm your machine with DDR2 slivers! Buy it if confirmed! I've got n buddies burning slivers and wrenches! It's all caused by the mixing of DDR and DDR2, DDR2 is cheap, DDR is not cheap! 2 g for 400+

If you want to give full play to the best performance of the computer, it is best to buy the bus frequency of the memory and the front-end bus frequency of the motherboard, so that the computer performance is the best.

It is better to choose some good brands as well. Samsung, Kingston are all good.

Buy two of the same model, same frequency, 1GB. Chips are the same, the production date is the same, and then throw away your 512! However, there are also decimal numbers that may be problematic, about 10%!

If you want 99% of the problem, then go directly to buy a pair of memory, those pairs of memory are dual-channel dedicated, but ** more expensive!

If you support dual channels, add 2 x 1G memory sticks to make full use of dual channels to improve performance.

The memory of the previous 512 can only be eliminated.

It is better to add the same brand of memory.

One more 1g is enough.

Waste of money!

Does Sempron support dual channel?

Some of the little partner's computer has experienced many years of use, and found that their running memory is no longer enough to support their own use, so they asked how to expand the running memory of the computer, and the current method of collecting one is to set up virtual memory, and the other is to install a memory module, the specific content is put in the following article, let's take a look.

How to expand the running memory of the computer?

Fang defeated the ode to the law one

1.Right-click and select "Properties" on the "This PC" icon;

2.Select "Open Advanced System Settings";

3.Click on the Advanced option in the pop-up panel, and then select Settings at the bottom right of Performance to open it;

4.A "Performance Options" interface pops up, check "Advanced" above, and then select the "Change" option to open;

5.Remove "Automatically manage page file size for all drives", select "Custom", and select the hosted system as the C drive;

6.Setting the memory size usually uses the default value, if you feel that the memory is insufficient, you can set it again, it is recommended to not exceed 2 times the actual memory (the smaller the memory, the faster the head positioning, the higher the efficiency), after the setting, click the OK button, and then restart the system to apply the settings.

Method 2, 1If the method of adding virtual memory does not work, it is recommended to install a new memory module.

The above is the method of how to expand the computer running memory mountain volt for everyone, I hope it can help you.

Add a memory module, or change to a larger one.