How to add memory when the memory slot is full

Since you are willing to spend money on a memory expander, it is better to change the motherboard, and the dual-channel motherboard can easily install four memory.

When the time comes, you can have four single 2G RAM.

But be careful.

The model and brand of the memory must be consistent, otherwise it is easy to blue screen.

What do you do with so much memory, generally 2G is enough, too much memory will affect the speed of the computer, the XP system can't recognize 4G memory, it's better to save the money of memory for a good graphics card. If you really need a large memory, change the board, the maximum support is 16G, which is more expensive. You can go to the computer city and ask, they are all high-end motherboards.

Look at you, you're not short of money.

Why do you want such a large memory?,The computer is not the larger the memory, the better.,4G is completely enough.,No matter how big the memory is, it's a waste of money.。。

If the memory is too large, it will not be good for the machine, 4G will do.

It also depends on whether your CPU can handle it.

What else do you not have to satisfy with such a configuration, it's all 4G.

There is no need to add it.

There are many memory slots on the server motherboard, but the CPU also has to be replaced, which is too expensive. If 8G is enough, then change to a motherboard with 4 memory slots.

Points to note when adding memory to your computer and when purchasing it.

I only remember a programming friend who wrote about artificial intelligence, and he said that if there was a room of memory to exchange data, it would not be enough, but the amount of scientific computing is very large! Suggest a way to love without a trace!

4G is pretty good.

There is no other way.

It depends on how much memory your motherboard can support

Dear, hello, I'm glad to answer for you, how to count the memory slots: The number of memory slots in the computer refers to how many memory slots can be inserted. The larger the motherboard, the more interfaces there are.

The memory module is connected to the motherboard through a gold finger, and the memory module has a gold finger on both sides. The gold finger can provide different signals on both sides or it can provide the same signal. SIMM is a kind of memory structure that provides the same signal on both sides of the gold finger, it is mostly used in the early FPM and EDD DRAM, initially can only transmit 8BIF data at a time, and then gradually developed 16bit, 32bit SIMM modules, of which 8bit and 16bit SIMM use 30pin interface, 32bit uses 72pin interface.

After the development of memory entered the SDRAM era, SIMM was gradually replaced by DIMM technology.

The easiest way to find out how many memory slots you have on your computer is to open the lid (side) of your computer's main unit and you can see the number of memory modules at a glance. As shown in the figure below. 02Another simple way to know the memory module is without opening the computer host, just right-click the computer in use on the icon in the lower left corner of the screen, and then the screen will appear menu, and then click "Task Manager".

03 Then, a window will pop up on the computer screen, as shown in the figure below, you can click on "Performance" in the menu. 04 Then, the window will display the menus of CPU, memory, disk, and Ethernet, and the CPU performance status will be displayed, and there is a slot in it. 05At this time, you can click on the "memory" item in the window, and you can see the number of memory slots 2 4, that is, there are 4 in total, and 2 have been used.

It's easy. Well, that's the general content, (end) the number of memory slots of each model of computer is different, the more memory slots, the more memory sticks can be inserted, and the greater the expansion space.

Hello, it is a pleasure to serve you and give you the following answers: A: 1

Generally speaking, the reason why the number of memory slots is empty is that the memory slots cannot be connected correctly due to the mismatch of the type of memory modules or the insufficient number of memory slots, resulting in the number of memory slots being empty. 2.

Solution and practice steps: (1) First, check whether the motherboard supports the type of memory module, if not, you need to replace the memory module of the same type; (2) Secondly, check whether the number of memory modules is sufficient, if not, you need to add the same type of memory modules according to the support of the motherboard; (3) Finally, install the memory module to the slot, make sure the connection of the slot is good, and complete the installation of the memory module. 3.

Related socks knowledge: memory slots are the installation location of computer memory, is a necessary part of computer memory, the number of memory slots determines the maximum capacity of computer memory, and the type of memory slots also determines the type of memory module. Therefore, when installing a memory module, it is important to pay attention to the number and type of memory slots to ensure the correct installation of the memory module.

If the laptop can't add a memory slot, you can use CPU-Z to check if there is a free memory slot, and if so, you can add it.

If you have a memory slot, you can't increase the memory without the memory slot, let alone increase the memory slot, and you need to change the motherboard wiring to increase the memory slot. It's actually a tongue twister.

How is it possible that notebooks are integrated, and you can only insert as many memory sticks as there are slots, and you can change to a larger one, for example, it turned out to be two 2G, then you can only buy a 4G 8G and replace one of them.

Generally, no.

1. The size of the motherboard circuit and body of the laptop should be determined at the beginning of the design, and the memory slot cannot be increased in the future.

2. If you need to increase the memory, you can change to a larger memory module, such as 8G and 16G memory modules.

As long as it is DDR2-800, the memory module can be mixed, and the compatibility problem can be ignored, Kingston, ADATA, and memory technology are all options.

DDR2-800 1G Now the second-hand price on the Internet is generally around 50-55 yuan, and some are particularly cheap, the second-hand price of DDR2-800 2G online has doubled, around 100-110 yuan, if you go to the place where the computer is repaired or the electronic market to buy second-hand strips, ** more expensive, DDR2-800 2G is almost sold to 140-150 yuan.

It is not recommended that you buy the so-called new DDR2 second-generation memory, ** is much more expensive than the current DDR3-1600 memory, the performance is only 1 N, and it will be eliminated in a few years after buying it, and the cost performance is too low.

Regardless of whether your system is XP or Win7 32-bit, you can only use memory when you are long, so your 1G+2G = 3G can be recognized and compatible, unless this memory module itself has some quality problems and is not very stable to run, then there will be symptoms such as blue screen in the process of reuse.

If you add a memory module, you must insert it like 1+3 or 2+4, that is to say, add a memory module to mix, then you must use 2 red slots or 2 yellow slots, of course, you can also mix 4 memory together (this requires 4 memory sticks are exactly the same), some motherboards have both DDR2 memory slots and DDR3 memory slots, but they cannot be mixed with each other.

First and foremost, it's important to check your motherboard model.

With the small report function of the Rubik's Cube Optimizer, you can see what model it is at a glance.

According to the model, go to the Internet to check whether it supports DDR2 or DDR3. If you support DDR3, don't use this 2. Buy a DDR3 2G directly, depending on your machine should be relatively old, XP?

If it's a 64-bit system, 4G is enough. If the system is 32-bit, 2G is sufficient. Because it supports a single 1333 Kingston at most, about 150, 2g85 blocks.

Zhongguancun**).

If the motherboard only supports DDR2, then buy a D2 one, regardless of the brand. I didn't find D2's memory module in Zol**, you go to the second-hand computer city to ask. It won't be expensive.

And also. First of all, you have to determine whether your computer motherboard still has extra memory slots Generally, desktops have at least 2 slots, and notebooks are generally up to 2 slots Actually, you can unplug the original memory and take it to the electronic city to match, it is easy to buy It is best to take the machine to the electronic city to install it and try it If not, it is easy to change

Can be compatible with Kingston memory. DDR2-800 Kingston 2G memory JD ** price is 219 yuan, ADATA 2G memory is 199 yuan. If two RAMs are inserted into the same color slot, dual-channel memory will be enabled, and the performance will be increased by 10%.

If a 1G memory is added to a 2G memory, only 1G of the 2G memory can be used to enable dual channels, and the other 1G is still a single channel.

You can use Kingston's, compatibility is OK If you want to add 4G, you can do it, depending on the needs of your program.

As long as it's the same as the gold finger notch in your memory, it's fine.