I bought a new 320G mobile hard drive, do you need to divide it into 2 areas?

Partitions vary from person to person, but it is impossible to have only one area, so all the data will be lost when the system is reinstalled, and the system disk should not be put together with other things, which will affect the speed. I don't think there's a need to partition too much,My 500G hard disk is only divided into three areas,One is the system disk,20G,Divide the big point to facilitate the future update of the system,One is the tool disk,The tool software you use daily can all be placed in this disk,For example, Thunder,Qianqian Jingting,Super Rabbit, etc.,20G rich。 With his is the entertainment disk, the game ** movie can be in it, if you need to save a lot of documents, you can build another document disk.

You can create more folders with fewer partitions.

It can be divided or not, generally a single hard disk is divided into 3 areas, which is enough.

It is not that the big hard disk must be partitioned, but not partitioning will affect the speed, and the impact on the speed is that your hard disk has too many fragmented files, and the head seek time is too long when reading. Now they are all vertical recording hard disks, and the problem of slow disk reading is basically gone.

Plug it directly into the computer, my computer-management-disk management, and then see the black part, that is your new disk, use this point directly, how you want to divide how to divide.

I think it's almost enough to divide into four plates, 80g apiece.

How many areas is suitable for a 320G hard drive?

You can divide into five or six districts, no problem. It's all about what you're going to do.

For 2T mobile hard disk, it is not recommended to divide it into multiple partitions, one partition is sufficient.

Because desktop partitioning is for one-click restore and full disk backup, it is convenient for maintenance. The function of mobile hard disk is mainly for the convenience of data exchange between computers, and it is not suitable for long-term storage of files (it is inevitable that there will be bumps). Different contents can be managed separately with folders, and there is no need to use partitions to manage them.

If you only divide into one area, moving files between different folders is instantaneous; If you divide it into multiple partitions, then wait slowly, it will take a long time, and the larger the hard disk, the more annoying it will be, and it will be inconvenient to manage files.

Today's portable hard drives can be used on mobile phones, tablets, and TVs. Most of these devices do not support multi-partitioning. Therefore, dividing into multiple zones is often a matter of adding to one's own troubles. It is recommended to divide only one area and then divide it into folders to manage different types of files.

According to the standard, 1T = 1024GB but in real life can not play that capacity, generally speaking, manufacturers default to 1T as 1000G, in fact, it is about 931G.

The theoretical value of 2T mobile hard disk: 1024GB * 2 = 2048GB.

The actual value of 2T mobile hard disk: 931GB * 2 = 1862GB 1t = 1024G (that is, 2 to the 10th power), but hard disk manufacturers often manufacture 1T hard disk capacity is only 1000G, this is because 1T = 1000G = 1000000M = 100000000KBP This is the standard of hard disk manufacturers, which is an open secret in the storage market, and can almost be said to be an "industry standard". Some hard drives or computers will state this on the packaging or instructions.

Generally, the built-in program inside the hard disk occupies some space, and the actual algorithm is: 1GB 1000 1000 1000 (1024 1024 1024) Windows operating system of the hard disk manufacturer. Therefore, the most accurate 1TB hard drive is 1000GB, and the actual calculation is 931GB is normal.

And after installing the system, it will occupy some space on the hard disk and provide it for system files to use, so it is normal for the total capacity displayed by the operating system to be different from the model capacity of the hard disk.

The 500G hard disk is recommended to be divided into 4 areas: C drive, 20G D drive, 150G E drive, 150G F drive, 155G

If the new disk is a zone, you want to add a zone, and you can directly use disk management to add compressed space in win7.

If it's an XP, you need to use software, you can try Partition Master and use it without losing data.

If you don't care about the purity of the data, use the disk utility under XP to delete the partition directly, and then create a new partition and fill in the space size.

Do you still ask others about this?

How are you going to use his space on your computer?

This kind of problem should be written by others at all, and other people's are not necessarily with yourself, you have to adapt to local conditions.

With the PQMoculus software, you can divide it directly in the system, which is convenient.

The partitioning method of portable hard disk is as follows:

1. First of all, you need to make sure that your mobile hard drive has been successfully connected to the computer, then go to the desktop and move the cursor to the My Computer icon, and right-click to pop up a dialog box.

2. Click the second item "Manage" in the pop-up dialog box and wait for the computer management dialog box to open.

3. Now the computer management dialog box is opened, and there is a "Storage" menu on the left menu bar to open the "Disk Management" option below.

4. Find your mobile hard disk in Disk Management, and generally pull out another space under your computer disk.

5. Move the cursor to your portable hard disk, right-click, pop up the disk settings dialog box, and select "Compress Volume" in the pop-up drop-down menu to partition the disk.

6. Set the space size unit of the disk you want to detach according to your own needs is MB, and you can set it.

7. After calculating the space you want to compress, confirm that it is correct and click "Compress".

8, now you can see that the space you just compressed has been separated, but now these spaces are unallocated, that is, if you can't see it in my computer, let's assign a drive letter to him.

9. Move the cursor to this section, right-click, a dialog box will pop up, and then select the first item to "Create a simple volume".

10. Now the new simple volume wizard pops up, you can operate according to the wizard prompts, click to enter the next step.

11. Here you can also allocate the space capacity of a disk you want to create a new disk, and click "Next" after the setting is completed.

12, here assign a drive letter to your disk, don't repeat the setting, click "Next" on it.

14. Now that all the settings are done, click "Finish" to perform the final operation and format the disk directly.

15. Finally, wait for the disk format to be completed, and there will be a prompt to create the disk successfully.

16. Now that the disk format is complete, you can also see that the following disk is not unallocated now, it has become a new volume i, which means that the disk partition is successful, if you want to continue the partition, repeat the operation according to this method.

First of all, open the start menu and find "My Computer", if some people don't have it, then find "Computer".

2.Then right-click on "Computer" and in the Dande context menu, select "Manage".

3.At this time, the computer management is opened, find the storage option here, and double-click to open it.

4.Open the storage dialog box, see that there is a disk management (local) here, double-click to open it.

5.At this point, you will see the disk manager you want to use. Here is the computer hard disk and mobile hard disk, the G disk below is the mobile hard disk, let's set up the partition.

6.Make a backup of your portable hard drive, copy all the contents to your computer, then right-click on the hard drive and select (Delete Volume).

7.If you see a warning prompting you to back up your hard drive, click "Yes" to do it.

8.Then I saw that in disk 1, the size of the unallocated area could not be found to be 465G, which was the mobile hard disk, and the "unallocated" area was right-clicked.

9.In the context menu, select New Simple Volume.

10.Open a new wizard and click Next.

11.In this step, you need to assign a drive letter, just the G given by the default system, and then click Next.

12.Here, select "File System" as NTFS and click Next.

13.After seeing the success prompt, it means that the task is complete, and click the "Complete" button.

14.The 30G space in the portable hard disk has been allocated to the G drive, and a few more partitions need to be created to divide the remaining unallocated area, in the same way, create a new volume.

15.Finally, I saw that I divided disk 1 into two partitions, and this is the end of the tutorial.

According to your needs, use the computer management tool, Disk Management,

The C disc is divided into 30GB and several other average points.

Use win7's built-in partition on it,Divide a few as you like,It is recommended that each partition is less than 500g。