Your phone got water, what should I do?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not use a hair dryer to blow or bake at high temperature (including microwave heating) after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. The mobile phone is composed of precision electronic components, and there is a potential risk after water ingress, so please keep the mobile phone turned off.

4. If you don't have a backup data, there may be a risk of data loss during repair.

If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--outlet query or vivo official website web version--slide bottom--service support--service network query--select the province and city to inquire about the customer service center address, it is recommended to contact in advance before going to avoid empty running, reasonably plan the itinerary, and travel safely.

Many people think that the mobile phone is broken, but in fact, there is no need to repair it, and it is good to use it at home.

Water ingress on the phone. Whether it falls into a basin of water or is covered with water, it is a serious problem. If it is more serious, it is likely to lead to the direct scrapping of the mobile phone.

What should I do if my phone gets water? You must know this first aid method!

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, if the mobile phone is a removable battery, please remove the battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the water by throwing the phone, this operation may cause the liquid stall to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer and other hot machines, which will cause the mobile phone to be damp and damage the electronic components).

If you are using a vivo mobile phone, the liquid inlet treatment method of the mobile phone:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Bring your mobile phone to the vivo customer service center for processing.

Customer service center address: Enter the official website of vivo Hangjia Hancheng APP--My--Outlet Inquiry or Vivo Official Website Web Version Radical - Bottom of the Slide - Service Support - Service Network Inquiry - Select the province and city to inquire about customer service Minnazi Center Address. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

If you are using a vivo phone, you can check the following mobile phone liquid inlet treatment methods:

1. Shut down immediately and take out the SIM card and SD card; Do not force it on, it is very likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to suck out the water in the gap and dig the head; When absorbing water, try not to move your phone;

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

You should turn off the phone immediately to reduce the wear and tear on the phone, and do not touch the phone. Then go to the nearest mobile phone shop for repairs.

Don't turn it on, blow it with a hair dryer, and then put it in a rice bowl and let it sit overnight.

You can put it in a rice bowl.

The first trick: "paper towel + cotton swab" water absorption method.

After the mobile phone is flooded, the most direct and effective way to know the wood is to use paper towels and cotton swabs to absorb water, paper towels are responsible for large areas, and cotton swabs are responsible for small areas. Start by wrapping your phone in a paper towel and quickly blot the water on the surface. After that, use a thin cotton swab to clean the earphone hole, charging wiring hole and other parts to avoid external moisture penetration.

The second trick: rice water absorption method.

Rice may seem common and inconspicuous, but it also has a powerful dehumidification and water absorption function! Stuff the watered mobile phone into a bag with rice, seal and store it for more than 24 hours, as long as the mobile phone is not in water for a long time, it can be restored to use and turned on normally.

The third trick: desiccant water absorption method.

Usually, you can prepare some desiccant or drying box in case of emergency. There will be some small packets of desiccant in some of the goods I usually buy, which can be used to accompany the branches, collect these small packets of desiccant, and then seal the soaked mobile phone with them, the effect is very good

If the mobile phone enters the water, it should be turned off immediately, stop using it, and let the maintenance personnel repair and dry.

Quickly shut down the machine to dry, and seriously go to after-sales maintenance.

1. If the mobile phone is flooded, in order to prevent the short circuit inside the mobile phone from causing more serious consequences, it is best to turn off the phone immediately after taking it out of the water and cut off the power supply.

2. Use a dry towel or paper towel to wipe all the water stains on the outside of the mobile phone, and take out the messy limb battery if the battery can be removed from the type companion and mobile phone.

3. Find a hair dryer and use cold air to blow on the mobile phone from the gap on the side of the mobile phone for 10-20 minutes, and do not change the position halfway. The goal is to remove moisture from the inside of the phone.

4. Leave the phone for a period of time (about two days) and then try to turn it on, if the phone does not respond or the screen is black, then you need to go to the repair shop for repair.

Shake the water dry. Wipe dry with paper.

Then blow with a hair dryer, warm and cold for a while.

Precautions for safe charging of mobile phones.

1.It is best to use direct charging: the original mobile phone charger has an overvoltage protection line, and is equipped with a rectifier transformer device, which can make the high voltage become low voltage, and the direct current is converted into alternating current.

Most of the universal chargers are produced by informal manufacturers, and they are made without protective coils, which is easy to make the voltage or current too high and unstable. Too high a voltage can easily inflate the battery, sometimes cause danger**, and the phone is easy to burn out.

2.Do not connect while charging**: Under normal circumstances, the insulation between parts with dangerous voltage and accessible conductive parts is broken down or the contact current is too large, which can easily cause electric shock to the user.

Especially for some smartphone users, "charging and playing" has become commonplace, and they should be more careful. Also, low-quality phone chargers can easily catch fire.

3.Don't cover anything when charging your phone: If you use an unqualified battery or charger, and if you use a poor environment when charging, such as high temperature and humidity, accidents may occur.

4.Choose products with qualified quality: When buying mobile phone chargers and batteries, you must choose qualified products from regular manufacturers, and don't try to buy products with unqualified electrical performance from unconventional small manufacturers.

Fire experts pointed out that a good charger has an overheated self-protection circuit inside, and when its internal temperature reaches a certain value, it will automatically disconnect the power supply and play a certain degree of protection.

5.Unplug the power plug when not in use: After charging, remember to unplug the power plug, which can effectively prevent the power bus from causing a fire.

6.Try to charge when someone is watching: Try to choose to charge the mobile phone battery when someone is there, so that you can deal with abnormal situations in a timely manner.

If the temperature is too high, there is obvious hot hands or burnt smell, etc., stop charging first, and then charge after checking the cause and carrying out necessary treatment.

Step 1: Shut down.

After picking up your mobile phone, you should press and hold the power button to turn off the power button as soon as possible, because water will slowly seep into the circuit, and it is easy to cause a short circuit in the mobile phone when it is turned on.

Article **1 Step 2 Ventilation.

In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place. The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

Article **2 The third step is to go to after-sales.

If the phone is flooded with a lot of water, or other mixed liquids, such as seawater and vegetable soup (salty liquids), even if it dries, it will still accelerate metal corrosion after being wet, and must be cleaned up

Precautions after the mobile phone gets into water.

Do not move or shake your phone frequently after entering the water, so as not to spread the moisture inside the phone and cause more damage.

Do not blow with a hair dryer or bake at high temperatures after water is in, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

The mobile phone reaches the waterproof level of GB 4208-2008 (Chinese standard) IEC 60529 (international standard) standard when it leaves the factory, but it is not permanently effective, and the bumping, squeezing, and falling in daily life may weaken the ability to resist splash and water, so try to avoid contact with water sources during the usual use of the mobile phone.

Smartphones are becoming more and more important in our lives, so much so that many times we hold our phones in the shower, swim in the summer, and go to the toilet.

So the question is: what should I do if my phone accidentally falls into the water?

The right way to fix it.

1. The mobile phone is turned off immediately.

Whether your phone has been soaked in water for a long time or dropped into the water, you have it up, and turning off your phone immediately is something you need to do urgently. When the phone is sure to be powered off, you can use a towel or toilet paper to wipe the water on the surface dry. This is the first step to properly dispose of the phone after it gets into the water, if the phone is only temporarily or partially overboard, then the probability of saving the phone is still very high.

2. Take a hair dryer to blow.

Power failure is only the first step, now you must not turn on the machine, after the boot damage must be the motherboard and screen, the maintenance cost of these two is very amazing.

Many people think that if the phone falls into the water, just take a towel or paper towel to dry the phone, and the phone can be used normally. Not really! Nowadays, when a smartphone falls into the water, you can't wipe the internal parts of the phone clean.

At this time, we need to shake the mobile phone and use centrifugal force to discharge the water; Take a hair dryer and dry the water from your phone.

3. Rice quick-drying or desiccant sealing method.

Everyone should have heard that the mobile phone can be put into the rice when it is flooded, the reason is that the water absorption of the rice is relatively good, and the mobile phone buried in the rice can help to absorb all the remaining water droplets and water vapor inside the mobile phone. After all, rice is just an emergency measure, and the water absorption effect is still a little different from that of professional desiccant and drying box, and you can seal the soaked mobile phone with them, and the effect is much better than burying it in rice.

Precautions. 1. Try not to press any buttons before the phone is completely dried to prevent a short circuit from damaging the phone.

2. Don't switch on and off frequently, wait at least two hours to turn on the device to see if it can run normally.

Point of view. Today's smartphones are 2000-3000 yuan, and iPhones are even higher. After the mobile phone gets into the water, if it is not handled properly, it will cause the mobile phone to become scrap metal directly, and we will spend thousands of yuan to buy a new mobile phone.