What should I do if my phone automatically shuts down when water intrusion?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. Because the phone has been turned off, please do not try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

The phone is flooded, the best way is to wipe it dry, take out the battery and SIM card, and then pour anhydrous alcohol into a plastic bag that will not leak, be sure to have anhydrous alcohol, let the phone be completely immersed in it, and wait until the water molecules are fully combined with the alcohol, and then take it out, (I don't remember the specific time, it seems that ten minutes is enough, because it is a small idea in a Japanese variety show, I watched it for a long time, and I forgot a little.) Because alcohol is volatile, the water in your phone will be volatilized and it will be restored.

Don't press the button, don't be busy turning it on, quickly remove the battery, first take paper or dry cloth to wipe the place where there is water, and then take the hair dryer to turn to low and blow slowly, and wait until it is completely dry before returning to the mobile phone (it is best to get on it again every night), if it is not good, you can only take it for repair.

Hurry up and get the battery out, hurry up, hurry up, get the water out.

Then put your phone in a warm place and dry it quickly.

I used to soak my phone in water, and that's what I did.

Later, the phone was fine.

Hope yours is okay too! ^_

The mobile phone is divided into local water ingress, the whole machine is immersed, just soaked and scooped up, or immersed in the water for a period of time, we can do the following steps first:

1 If the machine is still turned on, it must be shut down first, and if the battery can be removed, the battery must be removed first.

2 shell set Other accessories are removed first, stand-alone state.

3 The tail plug of the mobile phone The earphone port is outward, and the water is thrown out 5-10 times.

4 Place the phone on the desktop, the screen is facing down, use the hair dryer to blow the hair to the back of the maximum wind, the distance is about 15cm.

5 The hair dryer blows for about 20 minutes, and I am not afraid if the phone case is not hot at 80 degrees.

Do not force charging with a fluke mentality, in this way, the burning of components is small, and it may even cause a short circuit of the battery, which is really a heavy loss.

After blowing with a hair dryer, find a repair shop that can disassemble the machine in the fastest time, remove the battery button first, do not connect it to the motherboard of the mobile phone, blow the motherboard with a hair dryer, and the moisture in the motherboard will completely evaporate (not a professional repair shop, do not disassemble the motherboard), and the motherboard can be powered on to try to turn on the situation when the moisture is also dried in time.

Hello, it's a pleasure to serve you, I've seen your problem. Due to the large number of inquiries now, I will answer them one by one and query and summarize the data for you, so please be patient. Please do not close the order too early, and provide more effective information in order to better answer you, thank you for your understanding and support!

The internal components may have burned out, so don't try to boot it on again. Take it to the after-sales service or mobile phone store to repair it. After the mobile phone enters the water, be sure to turn off the phone as soon as possible, remove the battery (if the battery is not removable, it will not be disassembled), disassemble the case, absorb the water with a paper towel, and then dry it with a hair dryer or naturally (it may take several days), and you must not try to turn it on before the water that enters the mobile phone dries out, otherwise there is a high possibility of burning out the parts.

Hope it helps! Have a great day! If you think it is helpful to you, please give it a thumbs up!

In such a situation, try not to turn on the phone, you can take the phone out of the water, try to dry the water, and then put it under the lamp, or put it in the rice tank, so that the water in the phone can be absorbed as soon as possible, the best way is to send it to a professional repair shop for maintenance as soon as possible.

It's okay to turn it off, don't turn it on. Shake the water dry, wrap it in old newspaper, and wait until the water is soaked up before turning it on.

When the phone is flooded, it usually causes the internal circuit to circuit, resulting in automatic shutdown. Here's how to fix it:

1. If the mobile phone battery supports disassembly, remove the battery first, then disassemble the mobile phone, and air dry the internal water vapor.

2. If the mobile phone battery does not support disassembly, press the power button to turn off first, then disassemble the mobile phone, and air dry the internal water vapor.

3. For non-professional users, it is not recommended to disassemble the machine by themselves, and it is necessary to contact the after-sales service of the mobile phone, and professional and technical personnel will disassemble the machine for the user and dry the internal water vapor; If it can't be turned on, it may be caused by hardware failure, such as battery failure, internal circuit short circuit burning, motherboard chip failure, in this case, it also needs to be detected by professional technicians, find out the fault point for repair, or replace the faulty parts.

Take most brands of smart phones such as Huawei and Apple as an example: the reason why the mobile phone enters the water and turns on and automatically shuts down may be that the internal components of the mobile phone are damaged when it is turned on. Generally, the mobile phone cannot be turned on immediately after being flooded, because it is easy to cause the mobile phone to be injured a second time.

How to deal with water after the phone is ingressive:

1. When the mobile phone is taken out of the water, if the mobile phone is turned on, it needs to be turned off immediately and stop the operation of the mobile phone, which is to avoid the short circuit of the mobile phone after the water ingress and cause the motherboard to burn out.

2. After turning off the mobile phone, you need to immediately wipe the moisture on the surface with a paper towel or a cotton cloth that can absorb moisture.

3. Do not use a hair dryer to dry the hot air after the mobile phone enters the water, many people think that you can use a hair dryer to dry the moisture inside the mobile phone, but in fact this operation is completely wrong, because if you blow it with a hair dryer, the water vapor in the mobile phone may adhere to the motherboard, causing the motherboard of the mobile phone to also be soaked with moisture, thus causing secondary damage to the mobile phone.

4. You can find a dry and ventilated environment to let the mobile phone air dry naturally, or wrap the mobile phone in a closed plastic bag and put it in rice for a few days.

5. If the mobile phone still cannot be used normally, it is recommended to find a professional for repair.

If you are using a Huawei mobile phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Customer Service Center.

Make an appointment for service. Repair Spare Parts**.

Boarding service.

There are two main situations of water ingress into mobile phones: one. If the mobile phone penetrates into clean water, it will generally cause the mobile phone components to be short-circuited and burned when exposed to water.

Two. The mobile phone is infiltrated with corrosive liquids such as salt water and alkaline water, which will corrode the motherboard components. The loss caused by this is irreparable, and can generally only be solved by replacing the motherboard, which is costly, and the user needs to bear the relevant costs.

Generally speaking, after entering the water, the battery should be deducted immediately, if it is a built-in battery, you can press and hold the power button to turn off, and then put it in a ventilated and warm place to dry, if you have the ability, it is recommended to immediately disassemble the machine to clean up the liquid that enters, and then turn on the test after ten hours after thorough drying.

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. To drain the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the cracks of the mobile phone and absorb the water in the mobile phone as much as possible. Try not to move your phone when absorbing water.

5. Place the phone in a ventilated and dry place to let the excess moisture on the surface of the phone air dry naturally.

Step 1: Fish out your phone.

Step 2: Remove the battery. Don't press any keys, don't turn it off, just remove the battery (if you can, but most of today's phones don't support pool removal).

Step 3: Remove moisture. You can use a hair dryer, but the wind should not be overheated, and it should not be left to bake by the stove, as doing so will melt some components of your phone.

Step 4: Dry the process, put it with food desiccant.

The best way is to wrap the phone with toilet paper, and go to the mobile phone repair shop to open the phone repair shop to repair the phone, which depends on luck.

Take it to the aftermarket for blow drying repairs.

If you have a budget, you can get a new phone, and if you don't go to the old one, you won't come to the new one.

Summary. If your phone has been flooded and turns off automatically, then it is recommended that you take the following measures immediately:1

Stop using your phone and turn it off. In order to prevent a short circuit in the circuit, you can remove the phone battery first or turn it off and restart it several times in a row. 2.

Take your phone apart and blot the excess water with absorbent paper or a dry cloth. Never use a hair dryer, microwave oven, or other heating device to dry the machine, as this will accelerate water evaporation and cause more moisture to become trapped inside the machine and corrode. 3.

Keep your phone in a well-ventilated and dry place, such as a well-ventilated room or balcony, and wait at least 24 hours to ensure that the inside is completely dry. 4.Reassemble the phone and test it on.

If you still encounter problems, it is recommended to find a professional repair organization for overhaul or replacement parts as soon as possible.

If your phone has been flooded and turns off automatically, then it is recommended that you take the following measures immediately:1Stop using your phone and turn it off.

In order to prevent the circuit from being short, you can remove the phone battery first or turn it off and restart it several times in a row. 2.Take your phone apart and blot the excess water with absorbent paper or a dry cloth.

Never use a hair dryer, microwave oven, or other heating device to dry the Mega as this will accelerate water evaporation and cause more moisture to remain inside the machine for corrosion. 3.Keep your phone in a well-ventilated and dry place, such as a well-ventilated room or balcony, and wait at least 24 hours to ensure that the inside is completely dry.

4.Reassemble the phone and test it on. If you still encounter the problem of blind dates, it is recommended to find a professional repair organization for overhaul or replacement parts as soon as possible.

After the water is repaired, and then it always automatically shuts down, I feel that it is the same as the electric board charging mountain can not cover the electricity, the above shows that it is fully charged, but it is automatically shut down after charging, it shows that the macro is only 1%, this is not a problem with the electric board?

If the phone still turns off automatically after repair, and the battery level is unstable, it may be related to damage to the battery or circuit board. After the mobile phone is flooded, it is very likely to cause corrosion, short circuit or damage to the battery circuit board, which will affect the normal use of the battery, resulting in unstable power or abnormal charging. We recommend that you try the following:

1.Try replacing it with a new battery and then test whether the battery is working properly. 2.

If the battery still does not work properly after replacing the battery, then it is possible that the circuit board is damaged. It is recommended to find a professional maintenance personnel for inspection and maintenance. 3.

Now the OPPO brand battery on the market is about what price is it.

OPPO mobile phones of the same model need to use different models of batteries to accompany Xun, **It will also be different. Generally speaking, it is possible to change the OPPO battery on the market between 50 yuan and 150 yuan.

Summary. Hello, the mobile phone always turns off automatically after water penetration, which may be caused by a short circuit in the circuit or a damaged battery. Here are some ways to deal with it:

1.Turn off and disassemble the phone: First, immediately turn off the phone and cut off the power, disassemble the phone, and place the various parts in the phone in a dry and ventilated place to let it air dry.

2.Use absorbent paper or vacuum cleaner to absorb water: Use absorbent paper or vacuum cleaner to absorb the water inside and outside the mobile phone, and the absorbent paper needs to be pressed on the chip, line, etc.

3.Soak or scrub the circuit board with alcohol: While not all phones can be treated with alcohol, alcohol may be more effective for some particularly stubborn moisture issues.

However, be careful not to overuse alcohol, and you must wait for the alcohol to completely evaporate before reinstalling the battery. 4.Replace the battery:

If the battery has been damaged, it should be replaced with a new one in time. 5.Seek professional repairs:

The safest and most reliable way is to seek the help of a professional who can more accurately determine the cause of the problem, fix the problem, and fix the device. Please note that it is important to be safe when dealing with water ingress and avoid excessive damage to your phone.

Hello, the mobile phone always turns off automatically after water penetration, which may be caused by a short circuit in the circuit or a damaged battery. Here are some ways to deal with it:1

Turn off and disassemble the phone: First, immediately turn off the phone and cut off the power, disassemble the phone, and slide the various parts in the phone to a dry and ventilated place to let it air dry. 2.

Use absorbent paper or vacuum cleaner to judge silver and absorb water: Use absorbent paper or vacuum cleaner to suck up the water inside and outside the mobile phone, and the absorbent paper needs to be pressed on the wafer, line and other places. 3.

Soak or scrub the circuit board with alcohol: While not all phones can be treated with alcohol, alcohol may be more effective for some particularly stubborn moisture issues. However, be careful not to overuse alcohol, and you must wait until the alcohol has been fully exhausted before reinstalling the battery.

4.Replace the battery: If the battery has been damaged, it should be replaced with a new one in time.

5.Seek professional repairs: The safest and most reliable way is to seek the help of a professional who can more accurately determine the cause of the problem, fix the problem, and fix the device.

Please note that it is important to be safe when dealing with water ingress and avoid excessive damage to your phone.

It's clear or automatically shut down and restart.

Hello, this situation occurs after the phone is flooded, and the finch may be because the water has entered the inside of the phone and caused damage or short circuit to the electronic components, causing the phone to not work properly. You have cleaned up, but the problem still exists, Sun Zheng recommends that you immediately send your phone to a professional mobile phone repair shop for testing and repair.