Computer standby crashes 15, computer standby crashes

It is possible that the system has turned off the hard disk, and the hard disk cannot be restored when the standby ends. Just don't turn off the hard drive while it's on standby.

Control Panel >> Power Options, choose any one of the schemes, and turn off the hard disk >> never.

I used to have this with my computer, and now it's fine.

As long as the computer enters sleep, it cannot be woken up, the computer freezes, and the computer must be restarted to continue to use. What should I do if my computer crashes while it is standby? Next, let's follow me to learn how to solve the computer standby crash.

Solution 1 for computer standby crash

2. Find the "fan off when suspend" option and press enter to modify the setting to "disable".

Solution 2 for computer standby crash

First of all, if the computer is on standby for a long time, it will enter a sleep state, resulting in a black screen and no function of the keyboard and mouse. You can press the keyboard enter key or the power switch to recover. If not, here are the reasons you need to look for.

Reasons: 1. There are too many software installed on the computer, which occupies the system cache.

2. The system junk files have not been cleaned for a long time.

3. The computer is poisoned, resulting in a slow system process.

4. The computer chassis is too dusty, and the heat dissipation is poor, resulting in a crash.

5. Poor hardware contact leads to crash during long-term work.

Solution: 1. Clean up the useless software in the system, and set the path to the D disk during installation.

2. Use "Kingsoft Cleaning Assistant" and other cleaning software to comprehensively clean up the system and disk, and defragment the disk.

3. Install anti-virus software, scan the whole disk, and fix vulnerabilities.

4. In the case of power failure, clean up the dust of the motherboard and CPU in the case.

5. Re-insert the memory, graphics card, and hard disk cables.

1. Because your computer's motherboard BIOS has enabled the advanced power management function, and the Windows system has also enabled the advanced power management function, the two conflict and cause a crash or restart. The solution is to disable the power management in the BIOS.

2. The lack of space on your C drive can also cause the occurrence of sleep crash failure, if you use the sleep function, at least 1G of space should be reserved for the C drive.

3. If you use the standby and hibernation functions, and failures often occur, try not to use the standby and hibernation functions, because when encountering such failures, it is caused by the failure of the system itself, and sometimes it cannot be repaired, unless the operating system is reinstalled (if the failure is still necessary, the system installation disk must be replaced).

4. Turn off the phone if you don't use it for a long time, and you don't need to have a screen protector for a short time. If the fault persists, it is recommended to check and kill the Trojan horse and repair the system.

Computer freezes, there are the following aspects:

1。Software conflicts, incompatibilities: redundant similar software installations! The computer is overclocked or there is too much software installed, and the system memory is insufficient!

360 Butler, Software Uninstall, Find Uninstall, Again: Powerful Cleaning!

Or: Start Menu, Programs, Find Excess Software Uninstalled!

2。The computer system is interfered with by stubborn viruses and Trojans or worms, or you have lost your system files!

360 system first aid kit, start first aid, after finishing, restart the computer!

After booting up, [File Recovery Area], click on: suspicious startup items and Trojans, delete files completely!

Again: [System Repair], select all, fix it now!

Network Repair] to start repairing. Restart your computer!

3。Boot and crash, you can restart the computer, after the computer brand is out, press F8, Enter, Safe Mode, the last correct configuration, Enter, Enter!

6。Too much dust, unplug the graphics card and memory module, erase the gold finger with an eraser, and put it back!

7。Do it when necessary: restore the system or reinstall the system with one click!

8。Hardware problems, hard disk or motherboard or fan problems, send it for repair!

It's connected, so it's possible to get a virus.

Second, there is a problem with the monitor and graphics card, and if you don't set it, the screen won't automatically go black.

It is recommended that you redo the system first, preferably with the fully installed version, rather than with Depth or Tomato Garden. And then if this situation still occurs, you can go to the after-sales service to test it...

To check whether it is caused by a virus, you can use PC Manager to disinfect the virus, and then clean up the garbage.

Generally, the automatic shutdown may be caused by the high temperature caused by too much dust in the CPU fan, if so, clean up the dust of the CPU fan and heat sink, and add new heat dissipation silicone grease. If it is not a problem, it may be caused by problems with motherboard parts or power supply, voltage instability, hard disk failure, etc., and the new hardware is not compatible. In addition, a Trojan horse can also cause a shutdown due to a system failure, but the probability of this is very small, restore the system or try to reinstall it.

If it automatically shuts down or standby without operation, it may be a problem with the settings. Right-click on the desktop to select Properties Screen Saver Power Supply Select a scenario that suits you from the drop-down list in Power Usage Scenarios, and set Never in the list of Monitor Off, Hard Disk Off, System Standby, and so on below (or set a suitable time).

This solution is applicable to XP Vista Win7 system.

Problem Description]:

Unable to recover after standby, or slow to recover.

Cause Analysis]:

Failure to recover after standby, or slow recovery, is usually caused by a graphics card or hardware failure. You can try to update the graphics card driver, or contact a computer repair shop to check the computer hardware (you can use 360 Hardware Master to check the computer temperature first, if the computer temperature is too high, you should deal with the dust in the case).

Solution:]:

Solution 1: Update the graphics card driver.

1.Open [360 Software Manager] and enter the driver life in the search bar to search, click [**], click the [Install] button after completion, and follow the prompts to complete the installation. (Figure 1, Figure 2) Figure 1 Figure 2

2.Run [Drive Life] and select [Recommended Driver], find the graphics card in the list below and put the box in front of it, then click [One-click Update], click [Restart Now] according to the prompts after the driver update is completed, and the driver update will be completed after the computer restarts. (Figure 3, Figure 4) Figure 3 Figure 4

Solution 2: Check the temperature.

Figure 52It will be installed automatically after clicking. If you have 360 Hardware Master installed on the hardware on your computer, the following window will pop up directly.

If any of the CPU, hard disk, or graphics card is shown as red, it means that the computer is crashed due to high temperature, and the machine needs to be opened to clean up the dust (users who do not have experience in disassembling the machine are recommended to find a professional physical repair shop to help clean it up and prevent hardware damage caused by misoperation) (as shown in Figure 6).

Figure 6 Scenario 3: Detection hardware.

If none of the above solutions can solve the problem, it is recommended to find a professional physical maintenance store or after-sales center from the local area for inspection and maintenance.

The reasons why the computer freezes for a long standby time are as follows:

1. There will be a lot of garbage in the process of running the computer to occupy the memory, so if it is not cleared during long-term operation, the memory will not work normally and will be forced to crash.

2. When the computer is running, all parts will be heated.

Hard disks, memory modules.

CPU, etc., if the heat dissipation is not good after long-term operation, the heat resistance limit of the hardware will be reached, and the hardware will automatically stop working and crash in order to protect itself from being burned out.

Standby refers to the intermediate state of an energy-efficient, dependent system. Goes into standby when the processor unit (CPU) is idle and there is no device activity for a specified time interval. The machine will return to the ready state after one of the following events:

A device has triggered a hardware outage Access to any controlled device When the computer is in standby, all data and operating parameters are saved.

It should be in a dormant state, and many machines will crash or fake death when they enter hibernation. It is recommended to turn off the hibernation state, and set the desktop Properties Screen saver Power Options to not enable hibernation.

This is a power management problem, possibility.

1。System. You try it out for a clean version. I've also encountered it, can't wake up, reinstall the system to solve.

2。Power supply. There is only substitution.

3。Mainboard. This can be done by reverting to the default first, or by flashing the BIOS (to fix the problem with the old BIOS). It is also best to pass the substitution method.

We can't solve the computer problem, you can take care of the computer yourself.