How to get broadband for the computer, how to connect the broadband for the computer

There are many ways to give you two more commonly used methods.

One cat is enough, two are useless, there must be one.

A router, if you want to use a wired one, buy a wired router, use a wireless one, buy a wireless router, wired connection. First plug your network cable into the cat, the cat has at least two sockets, and the other socket is connected to the wired router, the router generally has 5 sockets, buy two network cables and plug them into the socket of the router, and the other end is plugged into your two computers, but you must set the routing parameters. You can get online.

Wireless connection, to have a wireless router, according to the priority connection to connect the first computer, the second computer has a wireless network card can be accepted, so be it, I hope to help you, I wish you good health.

What is the router for?,His function is to be used in more than two computers.,If you connect two computers and don't use a router,Then the router manufacturer is going to go out of business.,Haha There must be a router.,There's a problem in hi I.,I can't buy a router I can help you.,It's like this**There are dozens of cheap ones for sale.,*** There are more than 100 to see.。 The cat can only use one, which one can't be used as a router, unless your cat has a routing function, you can pick up two.

How to set up a computer broadband computer: Set up a computer dial-up.

Set up a broadband connection method].

How to create a broadband connection for an XP system].

1.Go to the Control Panel, select Network Connections, and click "Create a New Connection" on the left.

2.The Connection Wizard appears.

3.Select Connect to "Internet".

4.Set up my connection manually.

5.Select Require a username and password for a broadband connection to connect.

Don't write, just click Next.

7.You don't need a username or password, just go to the next step.

8.Select "Add a shortcut to this connection on my desktop" so that you have a broadband connection on your desktop, enter your username and password and start surfing the web.

How to create a connection on Windows 7].

1.Right-click on "Network" on the desktop and select Properties.

2.Go to the Network and Sharing Center and click on "Set up a new connection or network".

3.The "Set Connection and Network" page pops up, and select "Connect to Internet".

4.On this screen, click on "Broadband (PPPoE).""。

5.In this interface, the username and password can be omitted, and the connection name is written as "broadband connection", and click to connect.

6.The "Broadband connection" interface pops up, click Skip below.

7.Then click Close.

8.Go back to the Network & Sharing Center and click Change adapter settings on the left.

9.If you want to see the new Broadband Connection, right-click Broadband Connection, and select Create Shortcut.

10.On your computer's desktop, the "Broadband Connection" icon will appear.

It's best to get a router, the wired four ports are about 60 yuan, and the wireless one is more expensive. The setup is very simple, and you will know it at a glance as soon as you read the manual. If there are two broadbands, two cats can be useful.

If you don't install a router, you can't, I learn computers, buy a router with more than 100 meters, and a few meters of network cable will solve the problem!

You go and buy a router and tell the boss that if you install it for me, I'll buy it, or I'll buy it elsewhere.

Do you still have to worry about it yourself!

You can do without a router. But you'll have to pay for two broadbands.

Here's how to connect your laptop to broadband:

First of all, click on the "Windows key" in the lower left corner of the computer, and you will see the settings.

Click "Settings" to enter the "Settings Home Page".

In the "Settings Home Page", we can see "Network and Internet", click to enter, we can see that there is a "dial" below.

Click on "Dial" and you can see Dial--Set New Connection.

Click on "Set up a new connection", select a connection option, I select the first "Connect to Internet", click on "Next".

Click on "Broadband (PPPoE)(R)" to proceed to the next step.

Enter your broadband and password, click "Remember Password", next time just click "Connect", and set the "Connection Name" to make it easy to find the next time you connect.

After setting, click "Connect" at the bottom, and after the connection is successful, it will be "You are connected to the Internet".

Once we have set up the broadband connection, we can find the icon of the computer in the lower right corner of the desktop, click on it, and the broadband connection is the new connection we have set.

Click "Broadband Connection", enter the dial-up page, click on Broadband Connection, pop up three buttons, we click "Connection" on the line, you can delete it if you want, and then set up a new connection again.

Here's how to connect your computer to broadband:1. Find and click on Control Panel.

Then click Network & Internet Connections.

2. Find and click Network Sharing Center in System Settings.

3. Select Set up a new connection or network, and click Connect to Internet.

4. Enter the user name, password, and connection name in turn, and click OK.

Connected broadband generally refers to a broadband connection. Broadband connection in basic electronics and electronic communication is to describe the continuation or electronic line contains or can handle a wide range of frequencies at the same time, it is a relative way of description, the larger the frequency range, that is, the bandwidth.

The higher the data, the higher the data transmitted.

The steps of the method are as follows:

1. First turn on the computer, find and click the network icon in the lower right corner of the taskbar in the computer, and then click the network settings here to open it.

2. In the Network and Internet window, we click on the setting of new connection in the dial.

3. At this time, we choose to connect to the Internet, then select Next below to continue, and then select Broadband PPPOE to continue.

4. Then here we enter the username and password provided by the network operator, if you forget it, you can consult the network service provider, and then here we choose to remember the password, and finally click on the connection.

There are usually three ways to handle broadband:

1. Go to the local business hall to handle it.

When you go to the local business hall, you need to bring your ID card to the business hall to apply, pay the fee, and then there will be special personnel to install it. You can ask the salesman to introduce the type and situation, and finally make your own choice.

Second, call the manual service number to handle.

After applying for telecom broadband, you still need to go to the local business office, bring the relevant documents, go through the broadband procedures, pay by cash, and install broadband after 3 to 5 days under normal circumstances.

The manual service number is more convenient, and it can be completed by dialing ** and saving time and trouble.

3. Place an order in the online business hall.

Online handling ** can be based on your city, such as Guangdong, search for "Guangdong xx online business hall", click to enter the official website, log in to the online business hall, handle it at any time, you can choose the installation time, 60 seconds to complete the order, 48 hours after the network, and all **, ** are displayed, through comparison, users can freely choose to match.

There are several steps to apply for computer broadband:

Choose a broadband service provider: Choose a broadband service provider according to your geographical location and needs, and you can get more information about broadband solutions and services through the official website of the broadband service provider, consulting, offline stores and other channels.

Select**: Choose the right broadband for your use**, the **plan provided by different service providers will be different, you can choose the right **and**gear according to your needs, pay attention to indicators such as traffic and network speed.

Submit an application: Submit a broadband application on the service provider's official website or offline stores, fill in the corresponding information and submit, and the service provider will review whether your qualifications and materials meet the requirements.

Confirm the opening: After confirming that the contract information is correct, the service provider will open the broadband service for you and start to enjoy the Internet service.

The material shortage that needs to be prepared for the wide lifting early belt is as follows:

My ID card, mobile phone number, if it is not handled by the Fuxiao Bureau, you can prepare the ID card of the ** person, the letter of entrustment and other materials in advance.

After paying the installation fee and broadband rental fee, and obtaining the paper certificate, the staff will contact you within three days to make an appointment for on-site installation, which will take between 30 minutes and 2 hours.

The process of applying for broadband through the online business hall is as follows:

Enter the online business hall and find the ** in the broadband column.

Click the Apply Now button and fill in the relevant information.

Click the submit button and wait for the staff to contact you.

Inform the other party that they need to handle broadband services.

Confirm the intention to handle broadband, such as **, installation address, etc.

Once you've confirmed that everything is correct, just wait for the staff to contact you.

1. Place an order through the network operator for scheduled installation;

If you apply for China Unicom broadband, you can make an appointment first, and after the appointment, a special person will inquire about the line situation for you, and the specific appointment method is as follows:

1. China Unicom online business hall: After logging in, click "broadband" to make a broadband reservation;

3. Bring a valid ID card to the local business hall or call the local 10010 customer service to make an appointment for broadband processing.

1. The specific functions and operation paths are subject to the actual page;

2. Due to the different handling policies of various cities, the actual coverage of specific network resources is subject to local conditions.

The steps to connect to the broadband network are as follows:

Operating tool: MagicBook 14.

Operating system: Windows 7

Operational version: 1909.

1. Take the win7 system as an example, click the [Start] button on the computer, and then click the [Control Panel] button.

2. The [Control Panel] window pops up, and click [Network and Sharing Center].

3. The [Network and Sharing Center] interface pops up, and click [Set New Connection or Network] on the right, as shown in the figure below.

4. The [Set Connection or Network] window pops up, and click the first item [Connect to Internet].

5. Click [Next] to pop up the [Connect to Internet] window, if you have already connected to a network, then select the second [Still set up a new connection] button and click.

6. Select the [Broadband PPPOE] connection mode.

7. The interface of setting broadband account password will pop up, and you can click the [Connect] button to connect to broadband after filling in the broadband account and password.

1. Find the campus broadband access entrance (both sides of the general wall of the dormitory), connect the port and the computer.

2. Open the computer, select the windows window, and click on the control panel option.

3. Open the Control Panel and select the Network & Sharing Center option.

4. Go to the Network & Sharing Center option and select the Internet option.

5. Select Connections in the Internet Properties tab.

6. Add a network, click the Add option.

7. Select a broadband connection.

8. Enter the broadband password, you can dial up the connection, wait for a few seconds to complete the broadband connection, and you can access the Internet.

In this Internet era, many computer novices don't know how to set up a broadband connection for a computer, and how to set up a broadband connection. Here's how to set up your broadband connection.

1. First open the start menu, open the control panel in the start menu, find the network and internet option in the control panel, and click this option to enter the network settings page.

2. In the small link below the Network and Sharing Center, there is an option to view the network status and tasks, also with the left mouse button to click this option.

3. In the network status task interface, in the following column of changing network settings, the first option is to set a new connection or network. We're going to make a new connection, and that's where people start. Click on this link.

4. Then select the connection option, you want to establish a new broadband connection, so select the first item which is connect to the Internet, click on it to start the next step.

5. If you have never connected to the network before, there will be a prompt at this time, that is, to establish a connection, if you have connected before, and now you want to establish another connection, click on the Create a new connection option. Then click Next.

6. Then, on the page Connect to the Internet, enter the username and password of your network accountThen give the connection a name, whatever you want. Once you've set it up, click Connect and you've successfully established a network connection.

7. Establish a network connection, and then we can connect to the network in the network icon at the system tray, open this icon, click on one of the network connections, click the connection button, and you can connect to the network smoothly.