The computer at home has a network cable, and I want to connect the wireless router to other compute

If it is community broadband, then the network cable directly installed in the home is connected to the WAN port of the wireless router, and the other computers are connected to the LAN port, and if it is a notebook, you can connect it directly by searching for wireless. Then follow the instructions of the wireless router to set it up simply. You can get online.

Connect the main line to the router and then set the router path according to your needs, if it is a laptop, your network signal** will display the signal of the router, click to connect, enter the key of the wireless router, and that's it! If it's desktop, let's connect it!

First of all, please ask if you have bought a wireless router, if you buy it, you only need to plug the network cable of the wireless router into the telecom router, and the other end is plugged into the desktop computer, and then IE enters the IP address specified by the wireless router to set up, which is generally introduced in the manual!

This is a very difficult narrative, so try to make it clear to you. The network cable you pulled is ** line, right? Or what about network cables?

**Two wires, the network cable is the root line) If the **line has to be installed with a cat, one end is connected to the **line, and a network cable comes out of the cat. The network cable that comes out is connected to the router. Alas, it's a lot of work, find a friend and help you get it.

Buy a wireless router back, and set a password! I just bought it the other day! 1 tabletop and 1 portable! Wireless and wired like this! That's right! Recently, Jingdong ** has a Mercury route, which is good!

Hello dear, sorry to keep you waiting! Wireless router, as the name suggests, can be connected to the Internet without plugging in the network cable, and it has nothing to do with whether the computer is turned on or off, but the first time you set up a wireless router, you must plug the network cable into the computer to set up. 1. After the broadband cat is connected to the wireless router and the router is set up, the router will automatically dial up, and there is no need to dial up with a computer.

So you don't have to turn on the blind computer. 2. Even if you don't use a router, you don't need a computer dial-up. So after the router is set up, there is no need to connect to the computer.

The web page pulled by the other party is connected to the LAN port of the other party's router, the network cable should be plugged into the WAN interface of the subordinate router, and the subordinate router can use dynamic IP mode, taking WR841 as an example, the setting steps are as follows:

1. First confirm whether the LAN port address of the upper-level wired router is, if so, then you must modify the WR841NLAN port address;

3. Open the browser and enter, log in to wr841;

4. Enter the default account password for admin, click OK;

5. Enter the settings page, click Network Parameters - LAN Port Settings, enter the new LAN port IP address on the right, for example, click Save, the router prompts to restart, click Yes;

6. After restarting, enter the browser address bar and log in again;

7. Click WAN port settings, select the WAN port connection type as dynamic IP, and click Save;

8. Click Wireless Settings - Basic Settings on the left navigation;

9. Click to turn on the wireless function, turn on the SSID broadcast, WDS can not be turned on, the key type is recommended to select WPA2-PAK, set the wireless password of more than 8 digits, and click Save.

If you already have a cat in someone else's house, you just need to add the router directly, the router can be split to the computer, and you can set up the router hotspot.

After buying the router, let him set it up, plug in the network cable and it can be used.