Why do some people say that solid wood flooring is not suitable for geothermal heating?

Geothermal flooring has high requirements for the substrate, the temperature difference between day and night is very large in winter, and ordinary solid wood flooring will expand and shrink in heat, and the usual floor can not withstand tossing and turning, and is not suitable for geothermal heating. Geothermal flooring is different from non-heating floors, non-heating floors only need to deal with the problem of humidity, while geothermal floors, under the rapid change of temperature, the material is intensely thermal expansion, the floor contains humidity changes, and the material is not reliable, the problem of expansion, deformation and cracking will follow. In the face of this problem, the choice of materials is very important in the production of geothermal energy, so it is best to choose a solid wood geothermal floor like Fudeli.

This type of flooring integrates international patented 5G locks, pure manual surface technology, and three-layer solid wood structure, which is suitable for underfloor heating environment.

The water retention rate of solid wood flooring is high, that is to say, there is more moisture in the general solid wood floor, because the floor heating is hot, and under long-term baking, the solid wood floor is easy to deform or crack, which is very cost-effective. Therefore, it is not recommended to do solid wood flooring to install floor heating, the best choice is floor tiles, which have good thermal conductivity and good stability, you can try them. Solid wood flooring is not suitable for underfloor heating for the following four main reasons:

One: Because the moisture content of the air solid wood floor is high, it is easy to deform and other problems, even if it does not use geothermal heat, improper maintenance and laying will occur. I am tired of looking good, and I personally feel that it is not worth it.

Three: the effect of heat transfer, or more directly the problem of energy consumption, the thermal conductivity of the ground material from large to small is arranged as: natural stone, ceramic tiles, solid wood flooring, laminate flooring, solid wood flooring, chemical fiber carpet, pure wool carpet.

In addition, the threat of nailing to the underfloor heating system (both water and electricity) is great, and a special laying process is recommended.

With the gradual decrease in temperature, many users have chosen to start using floor heating at home, and many users and friends who are still decorating their houses are also considering installing floor heating for new houses, but there is a problem with installing floor heating, that is, can the floor heating be laid with solid wood floors that have been purchased? Because the installation of floor heating in some homes is a temporary decision, the answer to this question is more urgent, so today we will introduce you to the information about geothermal heating and solid wood flooring in this article.

Can you use floor heating for solid wood floors

Solid wood flooring can be used for floor heating, but which one is suitable depends on the material of the wood itself. At present, after years of market feedback, the best cost-effective is eggplant, the best performance is teak, and the performance and hardness are good. Comparatively, mahogany has poor performance.

Rosewood and teak materials can be used directly for geothermal energy, and other materials need to be used for geothermal wrenching at a lot of additional cost. As long as the moisture content of rosewood and Burmese teak is normal, these two materials are naturally stable, and they are the best choice for geothermal flooring. Other materials require special treatment.

There are other parts of the wood that cannot be used for geothermal even if it is treated, such as solid wood oak, heavy ant wood, fragrant two-winged bean, twin leaf wood (some called South American cherry wood), iron wire, disc bean, these are all no matter how to deal with geothermal energy, there are many kinds, not one by one. Some oak floors are made from secondary treatment, but in the south it is not possible to do geothermal flooring, because unless you can bet that it does not rain continuously every summer. In the north, it is possible, because in the north it is enough to reduce the water content, but in the south the water content is low, and the wood will expand if the performance itself is unstable.

Therefore, geothermal flooring is more professional and distinguishes between south and north, and some materials are more suitable for use in the north, such as mahogany and African maniac, but because the south has a lot of rain, it is not the most suitable for use in the south.

Solid wood flooring is better

If you don't do geothermal heating, the best floor in East China is heavy ant wood, which is very hard and heavy. Look, oiliness these are advantages, that is, **is the middle**, but the heavy ant wood is born hundreds of years old will have some color differences, but at present, customers can accept the natural color of the floor, because it is the reason for the growth of the tree itself. From the perspective of wood professionalism, solid wood flooring is a monolithic board, the smaller the rule, the smaller the deformation force, and the larger the wood specification, the greater the deformation force.

However, the larger the specification, the higher the difficulty and high cost, so the performance of the wood floor does not depend entirely on the high and low.

The above is all the content we have introduced about geothermal and solid wood flooring, you can see that in fact, some solid wood floors can be installed on geothermal energy, we are only targeting some solid wood floors here, and some solid wood floors can not be used with geothermal heating, as for the specific varieties, we have mentioned in the article, we take a closer look to know, and then we also introduced what solid wood flooring is better to buy if you don't do geothermal heating, you can also take a look. , you can get it for free

Hardwood flooring contains some moisture, and the geothermal temperature can deform the hardwood floor, such as cracking the joints. In addition, due to uneven temperature stress, it is easy to warp.

The most important thing is that the solid wood floor should be installed with a keel, and the keel will be hit on the ground, and there will be nails, which will break the geothermal heat! Moreover, the thermal expansion and contraction characteristics of solid wood are very strong, which involves the problem of water absorption and expansion rate! So solid wood do not do geothermal,

One of the top ten brands of composite wood flooring: icon flooring.

One of the top ten brands of laminate flooring: Del flooring.

One of the top ten brands of laminate flooring: Fillinger flooring.

One of the top 10 brands of composite wood flooring: SITA flooring.

One of the top 10 brands of laminate flooring: Cicero flooring.

One of the top ten brands of laminate flooring: Pak Gao flooring.

One of the top 10 brands of laminate flooring: Kendia flooring.

One of the top ten brands of laminate flooring: Yangtze flooring.

One of the top ten brands of laminate flooring: Hongnai flooring.

One of the top ten brands of composite wood flooring: Jixiang flooring.

If you do geothermal heating, it should be the most suitable for composite solid wood flooring, which is particularly easy to deform, so now geothermal is basically very few people dare to use solid wood flooring, thank you.

Not all hardwood floors are not okay! There is a choice.

1. Floor heating can be laid with solid wood flooring.

2. However, because of the high moisture content of solid wood flooring, it is easy to warp, deform, crack and other situations due to thermal expansion and contraction.

3. Therefore, it is not recommended to use pure solid wood flooring for floor heating, but to use solid wood parquet, which is relatively stable and not easy to deform, warp, crack, etc., or you can also choose ceramic tiles.

About the floor heating can be laid solid wood flooring, it is introduced here, I hope it will be useful to you.

It is possible that the floor heating is not hot caused by these 7 factors, and the solution can only be decided after investigating one by one.

1. The geothermal pipe is not cleaned.

The first reason why the floor heat is not hot is that the floor heating pipes are not cleaned and the scale is accumulated. Floor heating equipment is used for a long time, the combination of calcium and magnesium ions in the floor heating pipe will form scale, impurities, etc., the thermal conductivity of scale is extremely poor, in the process of heat exchange, the scale increases from 0mm to, and the heat exchange rate will be reduced to 79%, that is to say, when the thickness of the scale is reached, there will be 21% of the heat can not be converted normally, resulting in the heat is not hot.

Therefore, it is recommended that users clean the floor heating pipes in time, and it is best to carry out professional cleaning of the floor heating pipes in the later stage every 2 years, and the cleaning time can be before, during and after heating.

2. There is air in the geothermal pipe.

If the main floor heating bar is hot and the return bar is not hot, it may be that the air in the floor heating pipe causes air resistance, resulting in hot water not being able to enter the circuit and cannot be circulated.

In this case, we need to check that the return valve is open (a "zigzag" is open, and a "ten" glyph is closed); If there is air in the geothermal pipe that causes air resistance, you can open the air valve to exhaust until the hot water is released, or use the small valve on the water separator to mediate the circulation of each circuit, so that it can circulate evenly and achieve the ideal heating effect.

3. Poor system circulation.

The pressure difference between the supply and return of the water supply and return of the heating company is small, and the water flow rate decreases, resulting in the geothermal heat not heating. This situation can be solved by looking for a property.

4. The neighbors are too much contentious.

Maybe your neighbor or upstairs or downstairs has installed a circulating pump on the pipes, causing the water to flow too much to their home, and the neighbors are naturally affected. The residents have no way to solve it themselves, so they can negotiate with their neighbors and the property to solve it.

5. The water temperature is low.

If you want the indoor temperature to reach the ideal 18-22 degrees Celsius, the temperature of the floor heating water supply must reach more than 45. You can measure the temperature of the inlet line by yourself or by a professional, and if it is not up to standard, you can contact the property in your respective community.

6. The effective heat dissipation area is small.

Floor heating is radiant heat dissipation heating, heat radiates heat from the bottom to the top, if the ground cover is more, it will affect the heat dissipation. For example, in a bedroom, if you put a large floor-to-ceiling bed and wardrobe, the effective heat dissipation area is only 30-40%, which is 50% less than a room with legs and beds. Therefore, too much floor covering will also affect the heat dissipation effect of floor heating, making people mistakenly think that floor heating is not hot.

In order to make the floor heating better play the heat dissipation effect, it is best to choose furniture with legs, and do not lay a large area of carpet.

7. Improper construction.

During the installation of floor heating, some construction personnel do not follow the drawings in order to save floor heating pipes, expand the spacing of the pipes when the floor heating coil, or the floor laid above the pipe is too thick, which will affect the heat dissipation efficiency of floor heating. It is relatively troublesome to deal with this phenomenon, and it is necessary to re-pave the floor heating pipes, or reduce the thickness of the floor, which wastes time and causes greater economic losses, so it is recommended that users must find a professional and regular company for installation when installing.

In principle, it can be used, but the temperature rises very slowly with the ordinary laying method, and due to the material of solid wood, if the heating temperature is too high, it will also have some impact on the floor itself. At present, there is a new type of floor heating equipment for wood floor heating on the market, which seems to be called "floor heating module", which is made of carbon fiber or aluminum foil as a reflective film, which can reflect most of the heat, and the heating speed is fast, and the heating is uniform, but the cost is higher, and the cost will be more than half higher than ordinary floor heating, especially the material of aluminum foil or aluminum plate, which may be more than twice as expensive. That's basically it, handmade answers, I hope to answer your doubts

Solid wood geothermal flooring is a new thing in recent years, and it is not surprising that people usually have a process of accepting new things.

The traditional belief of consumers is that hardwood floors are prone to cracking and shrinkage and cannot be used in geothermal environments.

In fact, solid wood flooring is only a broad concept, which refers to the floor directly processed from solid wood.

Hardwood flooring is divided into many tree species, and the advantages and disadvantages of each tree species are different.

Solid wood floor heating is limited by the type of wood, and it is true that most solid wood floors are not suitable for floor heating.

Only a few solid woods with good stability can be used to make geothermal floors, and they also need to do some special processing, and the price is relatively high.

Tips for choosing a solid wood floor floor.

1. Material. Teak and other solid wood floors with good stability Solid wood geothermal flooring is limited by the type of material, most solid wood floors are not suitable for floor heating flooring, and a small number of solid wood with good stability (such as authentic teak and pineapple lattice, etc.) can be used as floor heating floors, and they must be treated by special processes. Therefore, the test report of solid wood geothermal flooring issued by the National Building Materials Testing Materials Center will specifically indicate that teak flooring and other stable solid wood floors are generally recommended to achieve the best results.

2. Moisture content.

The moisture content of solid wood flooring is an important factor that directly affects the deformation of the floor, and the moisture content of solid wood flooring used in geothermal environment should be controlled more strictly, which is lower than that of ordinary solid wood flooring. Normally, solid wood flooring dries the wood to less than 8 moisture content and not less than 6 when drying. The solid wood floor used in the geothermal environment has stricter requirements for heat treatment time and constant temperature than the solid wood floor used in the ordinary environment.

3. Lock. Locks are a unique connection technology between floors and floors. A good lock not only makes the floor easy to install and disassemble, but also can adapt to the shrinkage and expansion of the floor due to the change of temperature and humidity for a long time, so as to avoid the problems of cracks, falling off and warping that are easy to occur in the geothermal environment of the solid wood floor. There are two main types of locks on the market, one is European locks and the other is domestic locks.

When choosing a solid wood geothermal floor, try to choose a floor with a lock design on all four sides, a deep buckle shape, a large tensile force and a standard chiseled floor, and try to avoid choosing a floor with small tensile force, no lock design, only a lock on the long side and no lock on the short side, and a shallow buckle shape.