What is the hardware failure of the R gear?

Symptoms that will occur when the gear switch is broken:

1. The vehicle can't start, the vehicle starts in P gear and N gear by default, the gear switch is broken, and the gear dislocation can't be started.

2. The driving frustration is large, and the gear switch is faulty, which may input abnormal shift signals, which will affect the driving comfort.

The biggest advantage of automatic transmission vehicles is convenience, especially in traffic, especially when encountering large uphill traffic jams, the advantages of automatic transmission are more obvious. Now that automatic cars are becoming more and more popular, from the perspective of the development of automobile developed countries, most of the vehicles have been transferred to automatic transmissions, automatic transmissions, instead of hands, becoming the main model of daily driving is the trend of automobile development.

Extended information: 1. Automatic transmission cars usually use hydraulic transmission to replace the mechanical clutch of manual transmission cars, so there is no clutch pedal. When the engine speed is low, the torque transmitted by the fluid is limited and not enough to propel the car forward.

2. L low, low gear. When going downhill or down a long-distance slope, hang the gear here, which can limit the gear of the car to automatically only be in the lowest gear (equivalent to the first gear of the manual transmission car), which can make the car use engine power to brake when going downhill, and the driver does not need to step on the brakes for a long time to cause the brake pads to overheat and cause danger.

Fanghua 505A, the gear of the electric sewing machine to adjust the speed and slowness is out of order, there is no fast gear, only slow gear, it is too slow and too slow, excuse me? Which master knows how to speed it up.

The main work content is to modify the whole vehicle to meet the needs of autonomous driving. Usually modified parts: add lidar, millimeter-wave radar, ultrasonic radar, camera, GPS positioning The modification of the control harness of the entire unmanned vehicle, such as steering wheel modification, accelerator pedal control modification, brake control modification, whole vehicle light control modification, etc.

If you want to know more about it, please consult Jiangsu Xingzhitu Intelligent Technology****, the company is a domestic professional operator focusing on providing professional operation services for intelligent networked products, providing professional technical services including urban distribution, sanitation, mining, unmanned taxis, trunk logistics and other specific low-speed unmanned driving scenarios, mainly providing service types of services including car modification, training, operation, testing, maintenance, labeling, etc. The company's core personnel are all veterans in the industry, with more than 10 years of experience in talent service, technical and training personnel have more than five years of autonomous driving experience, and maintain good cooperative relations with many enterprises, and the team has established an intelligent network university alliance with more than 200 colleges and universities and applied undergraduate colleges. The company undertakes the mission and vision of making intelligent driving faster and better, and provides high-quality and high-level intelligent network professional services.

From what you described, the fault is mainly in the automatic transmission, and the fault on the engine side should be secondary. The reasons for the failure of the gearbox are roughly as follows: First, is there a problem with the valve body of the gearbox?

Cleaning may be required. If there is a reverse solenoid valve, it is necessary to focus on testing the reverse solenoid valve. The second is the reverse brake responsible for reverse gear inside the gearbox, and whether the clutch is faulty, such as severe wear of the friction plates and piston pressure relief.

It is recommended that you go to a regular auto repair shop and let the repair technician use the car fault diagnostic instrument to first test the electronic control system of the engine and gearbox, such as reading the fault**, reading the data stream, etc., and then do the corresponding testing, and then do the corresponding repair after confirming the fault point! Good luck! Please click on it to encourage the enthusiasm of answering the questions.

There are many reasons for the failure of the automatic transmission car when the R gear is reversed, and the reasons for the failure are: the failure of the transmission, oil pump, hydraulic torque, control circuit, solenoid valve, switch and other spare parts, and the failure of the reversing gear will occur. Reason for Operation:

In the case that the electronic parking brake is not released or the gear mode is not in place, there will also be a situation where the reverse gear is invalid.

The reason why the automatic transmission car can not reverse can basically be judged as the problem of the gearbox in most cases, first of all, check whether the transmission is too little oil, whether the main oil pressure and gear oil pressure are normal, and then check whether the gear switch signal is normal, whether the transmission computer to the shift solenoid valve circuit is good, whether the gear solenoid valve is working normally, if there is no problem, it means that there is a problem with the internal control system of the gearbox, and the gearbox should be disassembled to check the internal actuators.

In addition to the above transmission reasons, you can check the gear position (shift mechanism) and the auxiliary switch. To see if there is a shift jumping action or behavior, you can try to change gears back and forth, or feel obvious vibration, jitter, etc.

If it is a fluid transmission gearbox (automatic transmission), the maintenance is much simpler than that of the mechanical transmission (manual transmission), but due to the simple structure, the maintenance should be careful, and it often seems that there is no problem and the rework will be caused by missing a place.

It may be that the car is broken, so hurry up and go to the car repair shop to take a look, and it can't be solved.

This is due to a keypad lock issue.

Find the button with the word fn on the keyboard, find the key with the word num on the keyboard, hold down the fn key, click the key with the word num, and that's it, if you do it again, it will become a number, this is a toggle function.

The specific brand of notebook buttons may be different.

Cars in D gear can be in reverse gear! A few days ago, I drove a Pajero, because I wanted to change the four-wheel drive mode when driving, so I changed the gear to neutral, and after changing the four-wheel drive, I pushed it directly to R reverse... Fortunately, I kept looking at the four-wheel drive display on the dashboard, and I saw that the gear display R was pulled back quickly.

Strangely, there was nothing unusual about the vehicle, not even an abnormal noise.

Causes of the failure of the automatic transmission car hanging second gear: The gearbox, oil pump, hydraulic torque, adjustment circuit, solenoid valve, switch and other spare parts have failure problems, and there will be a failure of the reversing gear.

Hello! The R gear of the automatic transmission car is a parking gear, and when the car gear is in the R gear, the car is in a stopped state and must not move.

This fault phenomenon may be caused by the damage of the gearbox, and the maintenance of the gearbox failure, only by accurately judging the fault, can the maintenance cost be reduced.

The failure of the gear hardware can generally only be solved by replacing the shift components of the relevant gears, and if the manufacturer does not open the split maintenance authority, the entire gearbox can only be replaced.

Hello BYD R gear hardware failure, R gear does not respond when reversing, there are many reasons, let's take a look: 1. Failure causes: Transmission, oil pump, hydraulic torque, control circuit, solenoid valve, switch and other spare parts failure, there will be a failure of the reverse gear.

2. Reason for operation: In the case that the electronic parking brake is not lifted or the gear mode is not in place, there will also be an invalid reversing gear. For the above two reasons, the reason for the operation is fine, as long as you don't worry,

1. First of all, make sure that the gear is correctly entered into the R gear, and try to re-hang the gear. 2. In addition, check whether the P gear and handbrake are removed without oil. 3. If it is not good, it is likely to be a problem with the gearbox, and it is best to go to the repair shop to check it.

After parking in P gear on a steep slope, if you need to engage R gear, you need to press the brake, and then press the shift button to engage R gear, you can check whether the handbrake is not released.

The structure of the P gear lock car is the mutual cooperation between the gear and the locking pin on the output shaft inside the transmission, which is commonly said to be the force of the wheel decline is transmitted to the transmission, resulting in the close occlusion of the parts, so it has the function that the vehicle can not move before and after the P gear, and the greater the slope, the more the force is appropriately increased.

When parking uphill, stop the car steadily, turn off the engine, first pull the manual brake (handbrake), and then engage the P gear, this should not be the case.

1. There is oil seepage at the shell or oil pan of the oily gearbox, one reason is that the seal is aging and poor sealing; Another reason is that the shell has trachoma due to poor manufacturing processes.

2. The engine stalls and hangs into D or R, and the engine stalls This fault may be caused by the damage of the locking solenoid valve or the issuance of the locking control valve.

3. The input and output signals of the gearbox are incorrect or caused by the defective components themselves or circuits, and sometimes there are problems with the communication between the gearbox computer and other system computers.

4. When there is no response in gear, the vehicle does not move. This is usually caused by damage to the input shaft or reverse clutch, or damage to the DR brake.

5. Hanging D R gear impact, driving impact during the driving impact of the vehicle shift impact, impulse, is also a common fault phenomenon of automatic transmission, which may be caused by the transmission oil is too dirty, resulting in the valve body stagnation.

6. The gearbox is slipping, the acceleration is weak, and the car is in the process of driving, there is the sound of the engine idling during the accelerator speed increase, the speed of the car is not improved, and the whole car is weak, which is mostly caused by the burning of the clutch plate.

7. Water ingress into the gearbox due to external reasons, resulting in the gearbox not working properly, which may be due to the oil in the water tank, or water entering from the transmission breathable cap.

8. During the driving of the abnormal noise vehicle, there is an abnormal sound in the gearbox position, which is mostly caused by the wear of parts, or the installation of the gearbox is not in place.

The engine lacks cylinders The engine lacks cylinders mainly refers to the engine has one or more cylinders that are not working normally, which is manifested as: the exhaust gas flow discharged by the car has obvious intermittent intermittent conditions, and the exhaust pipe shakes badly, and the shaking of the engine can be clearly felt, sometimes accompanied by a sudden sound. This is mostly related to ignition coil failure.

2. The aging or loosening of the foot glue is the rubber block between the engine and the frame. Its function is to reduce the vibration and cushioning of the engine when working, and to have the effect of fixing the engine. Once these feet are aged or loose, the engine shakes dramatically.

The effect will be much weaker after this re-replacement of the foot glue. 3. Check the working condition of the spark plug, high-voltage wire and ignition coil if the ignition system is not working well, and the spark plug jumping condition is not good, which will also lead to this kind of failure. Workaround:

Check the spark plug for excessive carbon build-up and replace the spark plug. 4. If the oil pressure is unstable, if the engine carbon deposit has been cleaned, the throttle valve has been washed, the oil pad and spark plug have been replaced, etc., and the body shakes when idling, it may be the problem of fuel supply pressure and intake pressure sensor, if the oil pump supply pressure is abnormal or the intake pressure sensor value is wrong and the work is poor, it will cause the body to shake. Workaround:

Check the oil pressure and replace parts if necessary. 5. Air filter dirty air filter is designed to protect the engine and reduce wear, generally replaced in about 10,000 kilometers, if the replacement is not timely, there will be insufficient air intake to cause low idle speed, and the engine shakes, as long as the filter element is replaced, it can be solved. 6. High-voltage line break-offHigh-voltage line break-in refers to the high-voltage wire core breakage, which can affect ignition and cause engine shaking.

7. The fuel injector is blocked by the fuel injection nozzle of the electric injection vehicle, which is a key component of automobile fuel injection, and its service life is very long, which can reach hundreds of thousands of kilometers. However, because there is gum in the gasoline, the fuel injection hole of the fuel injector will be blocked, so the amount of fuel injected by each fuel injector is inconsistent, resulting in the inconsistent work of each cylinder and causing the engine to shake. The solution is to remove it and clean it.

There are several possible reasons for this:

Transmission computer control module (some models of transmission computer including solenoid valves, electronic sensors, electronic circuit boards, etc.) or electronic sensor failure, the fault is usually manifested as intermittent occasional failure, generally after the ignition can be temporarily restored to normal, there are also computer or Mission Impossible electronic appliances continue to fail. Most of them are caused by gearbox computer or electronic and electrical failures, (the content of the webpage is limited and cannot be listed one by one): when you encounter such failures, if the gearbox has no abnormal conditions (such as abnormal noise, no shifting, high engine speed, obvious frustration of shifting, weak speed, etc.), you should search for professional automatic transmission maintenance manufacturers in time for consultation to ensure driving safety and accidental damage to the gearbox.

When the gearbox fault light is on, and the vehicle gearbox has abnormal noise, no shifting, high engine speed, obvious frustration of shifting, weak speed, etc., it is necessary to search for professional automatic transmission maintenance manufacturers for consultation in time, operate in strict accordance with the requirements of the gearbox maintenance technician, and carry out temporary emergency treatment, such as: turn off and restart the gearbox to temporarily return to normal and send it to the factory for maintenance as soon as possible; Turn off the engine on the side of the road and wait for the trailer rescue, etc., remember not to be negligent and forcibly drive the gearbox to refuel and then send it for repair, which will greatly cause serious damage to the gearbox.

There are also some special cases: such as 1The gearbox failure light caused by the transmission system is on, and we often encounter it, which is difficult for ordinary auto repair shops to be competent for lack of maintenance experience, but it is simple for professional automatic transmission repair manufacturers.

2.Many car owners and friends encounter problems such as "abnormal transmission noise", after 4s or repair shop inspection, "confirm the transmission failure", and then go to our automatic transmission repair plant to check, many are not transmission failures, and they also occur from time to time.

What should I do if the gearbox fault light is on?

There is no obvious fault of the gearbox fault light after the light is lit to search for professional transmission maintenance manufacturers in time for consultation, you can consult a few more for comparison, choose professional, efficient, integrity transmission maintenance manufacturers to solve, such faults can often be quickly eliminated, most of the replacement of small parts can be solved, some cases do not need to repair or replace transmission parts, only through matching, upgrades, transmission system outside the fault caused, etc., even no maintenance costs can be solved, and so on. You can save yourself most of the repair costs and valuable time.

If the gearbox fault light is lit and there is an obvious gearbox failure, you should pull over under the premise of ensuring driving safety, contact a professional automatic transmission maintenance manufacturer, and solve it in accordance with the requirements of professionals.