What should I do if my iPhone turns on with an enabling error?

Hello, you take a look at the following approach:

1. Connect iTunes to your computer. If it's a normal connection, back up your data first, and then tap Restore iPhone

2. If it is not in an abnormal state, let the iPhone

Enter DFU mode and then tap Restore iPhone

4. How to enter DFU:

When the iPhone is powered on, press and hold the Home button first, then press and hold the Power on button until about 4 seconds after the screen goes off, release the Power On button, but continue to press and hold the Home button for 15 seconds, and the device will enter DFU mode with a black screen.

If your iPhone doesn't get an error prompt during the rebooting process, it usually means that it has been back to normal.

During the process of iPhone restart, sometimes some error prompts appear. These tips may tell you about what's wrong with your iPhone or prompt you to do something to fix the problem.

However, if your iPhone doesn't show any error prompts during the reboot process, it usually means that the reboot is normal and nothing has happened.

If you have any problems with your iPhone after restarting, such as not turning on or other error prompts, try the following solutions:

1.Make sure your iPhone is charged: If your iPhone battery is too low, it may not boot properly. Try to charge your iPhone for a few moments with the original charger.

2.Try to force restart your iPhone: Force restarting your iPhone may help fix some issues. This is usually the number one way to fix iPhone crashes and other issues.

The situation when the Apple phone is turned on means that the system firmware is lost or damaged during the update. The solution is as follows: Connect the computer to Apple, and then turn off the phone.

Press and hold the power button and the home button together. If a white apple icon appears on the screen, release the power button and continue to hold the home button. Finally, turn on iTunes and wait for the dust to be revealed for recovery mode.

Press and hold the shift key on the keyboard, click "Recover", and select the corresponding firmware for recovery.

iphone 13 mini，iphone 13，iphone 13 pro， iphone 13 pro max；The mute button for iPhone series products is on the left side of the front of the device; Models before iPhone 5 use a 30pin (i.e. 30-pin) port, and after iPhone 5 (included) products use a Lightning port.

If the forced restart can't be turned on, it should be that the system has also crashed and can't work. You can use Mad Master Apple Repair Master to repair your phone. Here's how:

Step 1: Open and run Crazy Master Apple Repair Master, select "Standard Mode" to repair your iPhone 6.

Step 3: Firmware. The software will automatically match your iphone6 with the corresponding repair firmware, the firmware version should be the same as your iphone6 system version, if the match is wrong, you can manually select.

Step 4: Start the repair, the repair will take some time, wait patiently, stay connected, don't interrupt or operate the phone, so as not to brick the device.

After waiting for the iPhone 6 repair to be completed, you can check the memory of your phone. See if it's a running issue caused by too much memory. If it is a newly upgraded system, it may be the instability of the system, and the repair can be completed to avoid encountering such problems again.

You'll need to deactivate the security mode and change your password.

If the IP291 is enabled incorrectly, then you can restart it and take a look.

1. Connect iTunes to your computer. If it's a normal connection, back up your data first, and then tap Restore iPhone

2. If it is not normal, let the iPhone enter DFU mode, and then tap Restore iPhone.

3. If you have the corresponding firmware, then press and hold the shift key on the computer keyboard, then click Restore iPhone, and then select the next good 702 firmware.

This situation is caused by the boot system, and you can restart the phone by pressing and holding the power button.

In general, it may be due to the battery running out of power and not being able to turn on. If this is the case that we can't turn on, please connect the phone to the power first, if you see a charging sign on the screen at this time, and the battery is very low, it means that the battery is dead.

If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on properly. So in this case, please let the phone charge for a while before turning it on.

If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the "Home and Power" button of the mobile phone at the same time until the screen is lit up and there is a display.

Method steps.

First look for Settings on our mobile desktop and click on it, as shown in the image below.

Please click Enter a description.

Then click on General, as shown in the image below.

Please click Enter a description.

Then tap Accessibility as shown in the image below.

Please click Enter a description.

Then click Show Adjustments, as shown in the image below.

Please click Enter a description.

Then click on the color filter as shown in the image below.

Please click Enter a description.

Finally, turn off the color filter switch and you're good to go.

Please click Enter a description.