Automatic transmission vehicle mid gear standard real E gear refers to

E gear: ecology mode, economy gear, snow gear, main function, low engine speed, in order to save fuel consumption, generally in the form of buttons.

Introduction to other gears of automatic transmission:

P gear: English park, parking gear, parking gear, parking gear, as the name suggests, parking stall, even if neutral gear has a brake parking effect.

R gear: English Reverse, reverse gear, reverse use, a single gear.

N gear: English neutral, neutral, no gear, mainly divided power transmission, often used for short parking and other traffic lights.

D gear: English DRIVE, forward gear, driving gear, drive gear. It is relatively light to make the car move forward and automatically change gears, just press the brake and accelerator to control the speed.

M gear: English manual, full manual transmission mode, is often said in the car sales of the manual transmission in the hand automatic integration, control high to low transfer used, generally not commonly used.

L gear: English low, low gear, climbing gear, hanging to this gear, the gearbox will be limited to 1st gear and 2nd gear, mainly used in climbing sections.

S gear: English SPORT, sports gear, hooked into this gear, the gearbox can shift freely, the engine has been at high speed, long time to resist the gear position at high speed, the speed is relatively fast.

There is no E gear on the automatic transmission.

The basic gears are: p, parking, r, reverse, nneutral, d, and forward.

There are also D1D2 or 123 for climbing hills and driving on bumpy roads.

The automatic manual transmission also has M+ and M- for manual upshifts and downshifts.

Some high-end models also have an S mode, which is Sport mode.

E (economy gear) uses this gear to save fuel.

The general automatic transmission vehicle transmission has p, r, n, d, 3, 2, 1 gears:

p Parking gear. When the car is parked, the gear selector lever must be pulled into the P position.

rReverse. n Neutral. The n-digit is equivalent to neutral and can be used at the time of starting or when towing the truck.

d Forward gear. When driving normally, put the gear selector lever in the D position, and the car can automatically shift between 1 and 3 gears. D is the most commonly used gear.

1. P (parking) parking gear, start gear.

When you don't use it, the gear is there, and the wheels are mechanically locked to prevent them from slipping. The vehicle must not use the P gear until it is completely stopped, otherwise the mechanical parts of the automatic transmission will be damaged. In addition, the automatic transmission car is equipped with a neutral start switch, so that the car can only start the engine in the "P" or "N" gear, so as to avoid the car suddenly moving forward when starting in other gears.

2. R (reverse) reverse gear.

When reversing, automatic transmission cars are not able to use semi-linkage like manual transmission car gear tracks, so special attention should be paid to the control of the accelerator pedal when reversing. It is usually necessary to press the safety button on the lever to move the lever to the "R" position. When the vehicle has not come to a complete standstill, it is absolutely not possible to force the transmission into "R" gear, otherwise the transmission will be seriously damaged.

3. N (neutral) neutral.

When stopping temporarily (e.g. at a red light), use this gear. Note that this gear indicates neutral, and in order to prevent the vehicle from slipping on a slope, one line is designated to apply the brakes.

4. D (drive) forward gear, also known as drive gear.

The transmission in D gear automatically switches between speed and throttle in 1 overdrive gear (equivalent to 1 4th gear), which is used for general road driving.

5. L (Low) low speed gear.

When going down a hill or going down a long-distance slope, hang the gear here, which can limit the gear of the car to automatically only be in the lowest gear (equivalent to the first gear of the manual transmission car), which can make the car use engine power to brake when going downhill, and the driver does not need to step on the brakes for a long time to cause the brake pads to overheat and cause danger.

What do the automatic gears mean? (Driver's guide included).

P (parking) or R (reverse).

n (neutral) blank.

d (drive) forward gear, also known as drive gear:

or 2 (second gear).

The second gear is a low-speed forward gear.

l (low) or 1 (first gear) is a low-speed gear, also known as 1st gear.

It generally has P, R, N, D, 2, L several gears P is the parking gear is also a parking gear, which means that in this gear is parking, and the key can only be pulled out in this gear. R is a reverse gear, and to be in R gear, you must press the brake to get it in. n is neutral, also called trailer.

D is the forward gear, 2 is the forward 2nd gear, which is equivalent to the 3rd, 4th, and 5th gears of the manual change, and L is equivalent to the 1st and 2nd gears of the manual change. But some automatic changes are not necessarily these gears, but they are all the same. If you think what I said is almost the same, remember to give it a thumbs up.

Generally, the gears of automatic transmission vehicles are p, r, n, d, s:

p Parking gear. When the car is parked, the gear selector lever must be pulled into the P position.

rReverse. n Neutral. The n position is equivalent to neutral and can be used when starting, when people are not leaving the vehicle and parking, or when towing a vehicle.

d Forward gear. When driving normally, the gear selector lever is placed in the D position, and the car can automatically shift between the forward gears. D is the most commonly used gear.

S gear is the sport mode of the car ("s is"sport"In the S-gear sports mode, the gearbox can shift gears freely, but the opportunity to change gears is delayed, so that the engine can be maintained at high rpm for a longer time, so that the car can travel at low gear and high rpm for a longer time, and then obtain greater torque output and acceleration. As the car is moving, it pushes the gear knob directly in"S" gear is sufficient, and is usually used on hill climbs and when overtaking speeds quickly.

Very much for the technical exchange of the auto parts industry, you can recommend the list of auto parts talent network miscellaneous piles You can see a lot of answers.

What do the automatic gears mean? (Driver's guide included).

Description of each gear of the automatic transmission car: P parking gear, R reverse gear, N neutral gear, D driving gear, S, L low gear, 3, 2, 1 is the limit gear refers to the forced transmission to be limited to a certain gear below.

The starting method of automatic transmission car, it is best to move the gear to the correct position after a few seconds after the engine starts, such as changing into D gear when moving forward, changing into R gear when reversing, and still need to step on the brake pedal in the process of releasing the handbrake when starting, which is also the foot brake, which is to prevent the rapid start phenomenon due to the increase in the speed of the car engine in the process.