Shut it down and then it will start automatically repeatedly, what s going on with the Win10 system?

Hello, it is recommended to use a USB flash drive to repair the system, if it does not solve the problem, then reinstall the system.

Generally, there are two kinds of shutdown and restart, one is caused by the operation card before the shutdown, and the other is that every shutdown is a restart, which will be explained separately below.

1) Caused by computer card before shutting down

Play games, watch**, or operate large programs, or the computer has been used for a long time, at this time it is very stuck, you have to have some patience to wait for the computer to recover slowly, click on every page on the computer to recover slowly, and wait for the shutdown or other operations after returning to normal, if it still can't, just press the power on and off button to shut down (if the computer is on for too long, my experience is, restart the computer every once in a while to release the cache and continue to play).

2) Restart every time you shut down:

If you have installed the Sogou input method, or installed the QQ input method to uninstall and try, you can also uninstall the input method and try to reinstall it (these software are the culprits, which is known from the exchange with the returner.) If it's not the problem here, take a look at the method below).

Try to uninstall all the software, drivers, patches, etc. before the accident, if the uninstalled software is invalid or you don't know what is installed, first soft and then hard, restore the system. Still can't reinstall the operating system (if you have any questions, please ask me).

3) If the above methods can't solve the problem, first soft and then hard, reinstall the operating system, don't install software, patches, drivers, etc., and see if there is still a problem with the shutdown? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

4) In terms of hardware, such as hard disk, memory, etc., whether there is a problem, whether the temperature of CPU and other hardware is high, if it is caused by hardware problems, it is recommended to overhaul it.

Method steps.

Click on the Win10 official version of the desktop to find the "This Computer" icon, right-click and select the "Properties" item from the pop-up right-click menu.

At this time, the "Control" window will open, find the "Advanced System Settings" button on the left side and click to enter the detailed settings interface.

Once the System Properties window opens, switch to the Advanced tab and click the Settings button in the Enable and Failback section.

From the "Startup and Fault Recovery" window that opens, clear the "Automatic Restart" item in the "System Failure" column, and click "OK" to complete the setting.

If the problem of automatic system restart cannot be solved after the above settings, then we need to make the following settings: use "win+r" to open the "run" window, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

Hello, it may be caused by the previous update of the system, you can uninstall the last update. It is best to take it to the corresponding after-sales service and let the professionals inside check it.

1. On the Windows 10 desktop, right-click this computer icon on the desktop, and select the "Properties" menu item in the pop-up menu.

2. At this time, the system window will be opened, and click the "Advanced System Settings" menu item on the left side of the window.

3. In the open system properties window, click the "Settings" button for startup and fault recovery.

4. At this time, the "Startup and Fault Recovery" window will be opened, remove the "Auto Restart" in front of the "Auto Restart" checkbox in the window, and finally click the OK button.

If you have additional hardware and other external devices, remove it, if you run a specific software restart, you can change the software version or run it in compatibility mode, try it, reinstall the right or good driver provided by the official website of Huamao Dashuo, and restore the pre-installed system to try. If the fault persists, it is recommended to go to the service center for testing.

Step 1: Click on the Win10 official version of the desktop to find the "This Computer" icon, right-click and select the "Properties" item from the pop-up right-click menu.

<>Step 3: After opening the "System Properties" window, switch to the "Advanced" tab and click the "Settings" button in the "Enable and Failback" column.

Step 4: From the "Startup and Fault Recovery" window that opens, clear the "Auto Restart" item in the "System Failure" column, and click "OK" to complete the setting.

Step 5: If the system restarts automatically cannot be resolved after the above settings, we need to make the following settings:

Make Liang Chunxi use "win+r" to open the "run" window, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

Step 6: In the "System Settings" interface, switch to the "General" tab, check the "Diagnostic Startup" item, click the "OK" button, and restart the computer.

Step 7: When the system reboot is completed, enter the "System Configuration" interface again, switch to the "Services" tab, check the "Hide Windows Services" item, and check the item you want to start automatically with the system, and click "OK" to complete.

Expand Zisen Lifting:

Windows 10 is a cross-platform and device application operating system developed by Microsoft in the United States.

It was the last standalone version of Windows released by Microsoft. There are a total of 7 distributions of Oak Brother Windows 10, which are aimed at different users and devices.

As of March 7, 2018, the official version of Windows 10 has been updated to the Fall Creators Edition, and the preview version has been updated to the Spring Creators Edition.

Control Panel --- System and Security --- System - Advanced System Settings.

After opening the System Properties window, switch to the Advanced tab and click the Settings button in the Enable and Failback column.

From the "Startup and Fault Recovery" window that opens, clear the "Automatic Restart" item in the "System Failure" column, and click "OK" to complete the setting.

From the "Run" window that opens, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

In the "System Settings" interface, switch to the "General" tab, check the "Diagnostic Startup" item, and click the "OK" button to restart the computer.

When the system reboot is completed, enter the "System Configuration" interface again, switch to the "Services" tab, check the "Hide Windows Services" item, and check the item you want to start automatically with the system, and click "OK" to complete.

If the above methods still do not solve the problem of automatic restart of the computer, make the following settings:

Enter the "Control Panel" - "Power Options" interface in turn, and click the "Select the function of the power button" button on the left hill or side.

<>Finally, in the "System Settings" interface, clear the "Enable Fast Startup" item from the "Shutdown Settings" column, and click the "Save Modifications" button.

Recently, many users who have just upgraded to the official version of win10 have reported that they often encounter the problem of automatic restart of the computer for no reason in the process of using the computer. What should I do? In fact, the cause of this problem is usually caused by incompatible hardware.

Next, I will share with you the solution of the automatic restart of the windows 10 system for no reason.

Here's how:

1. Click the "Windows" button in the lower left corner of the official version of the win10 official version of the desktop, and click the "File Explorer" item from the extended panel that opens.

2. After entering the "File Explorer" interface, find the "This PC" icon from the right side, right-click and select "Properties" from the pop-up right-click menu.

4. After opening the "System Properties" window, switch to the "Advanced" tab and click the "Settings" button in the "Enable and Failover" column.

5. From the "Startup and Fault Recovery" window that opens, clear the "Auto Restart" item in the "System Failure" column, and click "OK" to complete the setting.

6. If the problem of automatic system restart cannot be solved after the above settings, we need to make the following settings: right-click the "Windows" button and select "Run" from its right-click menu.

7. From the "Run" window that opens, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

8. In the "System Settings" interface, switch to the "General" tab, check the "Diagnostic Startup" item, click the "OK" button, and restart the computer.

9. When the system reboot is completed, enter the "System Configuration" interface again, switch to the "Services" tab, check the "Hide Windows Services" item, and check the items you want to start automatically with the system, and click "OK" to complete.

10. If the above methods still can't solve the problem of automatic restart of the electric round stool brain, then make the following settings:

Enter the "Control Panel" - "Power Options" interface in turn, and click the "Select the function of the power button" button on the left side.

12. Finally, in the "System Settings" interface, clear the "Enable Quick Startup" item from the "Shutdown Settings" column, and click the "Save Modifications" button. At this point, the problem of automatic computer restart has been solved.

The above is the solution to the problem of automatic restart of the Windows 10 system for no reason. Users who encounter the same problem, hurry up and follow the method to take a look!

1. On the Windows 10 desktop, right-click this computer icon on the desktop, and select the "Properties" menu item in the pop-up menu.

2. At this time, the system window will open, and click the "Advanced System Settings" menu item on the left sidebar in the window.

3. In the system properties window that opens, click the "Settings" button for startup and failback.

4. At this time, the "Startup and Fault Recovery" window will be opened, remove the check box in front of "Auto Restart" in the window, and finally click the OK button.

1. Click on the Win10 official version of the desktop to find the "This Computer" icon, right-click and select the "Properties" item from the pop-up right-click menu.

2. The "Control" window will open, find the "Advanced System Settings" button on the left side and click to enter the detailed settings interface.

3. After opening the "System Properties" window, switch to the "Advanced" tab and click the "Settings" button in the "Enable and Failback" column.

4. From the "Startup and Fault Recovery" window that opens, clear the "Auto Restart" item in the "System Failure" column, and click "OK" to complete the setting.

5. If the problem of automatic system restart cannot be solved after the above settings, we need to make the following settings: use "win+r" to open the "run" window, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

6. In the "System Settings" interface, switch to the "General" tab, check the "Diagnostic Startup" item, click the "OK" button, and restart the computer.

7. When the system reboot is completed, enter the "System Configuration" interface again, switch to the "Services" tab, check the "Hide Windows Services" item, and check the item you want to start automatically with the system, and click "OK" to complete.

Method steps.

Click on the Win10 official version of the desktop to find the "This Computer" icon, right-click and select the "Properties" item from the pop-up right-click menu.

At this time, the "Control" window will open, find the "Advanced System Settings" button on the left side and click to enter the detailed settings interface.

Once the System Properties window opens, switch to the Advanced tab and click the Settings button in the Enable and Failback section.

From the "Startup and Fault Recovery" window that opens, clear the "Automatic Restart" item in the "System Failure" column, and click "OK" to complete the setting.

If the problem of automatic system restart cannot be solved after the above settings, then we need to make the following settings: use "win+r" to open the "run" window, enter "msconfig" and press enter to enter the main interface of the system configuration utility.

In the "System Settings" interface, switch to the "General" tab, check the "Diagnostic Startup" item, and click the "OK" button to restart the computer.

When the system reboot is completed, enter the "System Configuration" interface again, switch to the "Services" tab, check the "Hide Windows Services" item, and check the item you want to start automatically with the system, and click "OK" to complete.

You try it, turn off auto-update first:

Press the Windows logo key + R key to open the Run Window command, and enter " in the window command

After opening Group Policyr, we first click on the Computer Configuration - Management Templates - Windows Components menu option.

In the Windows Component menu window, click to select the "Windows Update" submenu item, and then find "Configure Automatic Update" in the configuration options on the right.

If we want to turn off the automatic update function, we should select "Disabled" in the left option, and then click the OK button, so that we can smoothly turn off the automatic update function of the windows 10 system.

Then replace the graphics driver with the driver of win7. Note: Do not use the latest. Just use your previous graphics card driver (preferably before April 2015).

If it no longer restarts automatically, it means that the graphics card driver that win10 updated for you is not compatible.

If it's a problem with the graphics card, you can disable the automatic update of the graphics card driver by using the following methods:

win+r runs the local policy grouper.

Computer Configuration - Management Templates - System - Device Installation - Device Installation Restrictions.

Disables the installation of devices that are not described by other policy groups ——— enabled. (Windows won't be able to install drivers; Note: To install drivers, turn off the policy).

After setting up the WinUpdate Driver will show that the installation failed. You can leave it alone. In the future, you will need to install the hardware driver. Then set it to "Not Configured".

After setting the device not to install the hardware driver automatically, you can turn on automatic updates as before.