How do I install a wireless router with broadband and a laptop at home?

I don't know if the broadband of the landlord's house is ADSL dial-up or home-in-home?

If it is dial-up, connect the network cable of ADSL to the router, then set the router to dial automatically, and turn on the wireless module of the wireless router (don't forget to set the password).

If it is a static IP for entering the home, you only need to connect the network cable to the router, and then set the shocking IP of the router The other steps are the same.

Routers all have manuals, or it's very simple.

Select Make sure your laptop has a wireless card.

If you have a word, sell a wireless router.

Then use a network cable to connect the laptop to the wireless router.

Just go to the wireless router and follow the setup wizard.

It depends on what brand of router you bought, and there are manuals in it.

TP-IINK is recommended.

Choose a router with wireless capabilities.

Go to your router and set up your network.

Go to the router wireless option to set a password and remember the name of your router.

ok！The earth-shattering one upstairs means dynamic.

Connect the network cable to the cat, and then connect the network cable to the computer (you can also enter the router wirelessly). Go to the route and set the broadband username and password. Turn on wireless and restart routing. ok！

Plug the network cable into the router, and then turn on the wifi of the laptop to see what the password written on the router is, and you can directly enter it to connect to the Internet.

Buy a wireless router and you're done.

Connection steps: First, click on the "Windows key" in the lower left corner of the computer, and see the settings.

Click "Settings" to enter the "Settings Home Page".

In the "Settings Home Page", we can see "Network and Internet", click to enter, we can see that there is a "dial" below.

Click on "Dial" and you can see Dial--Set New Connection.

Click on "Set up a new connection", select a connection option, I select the first "Connect to Internet", click on "Next".

Click on "Broadband (PPPoE)(R)" to proceed to the next step.

Enter your broadband and password, click "Remember Password", next time just click "Connect", and set the "Connection Name" to make it easy to find the next time you connect.

After setting, click "Connect" at the bottom, and after the connection is successful, it will be "You are connected to the Internet".

Once we have set up the broadband connection, we can find the icon of the computer in the lower right corner of the desktop, click on it, and the broadband connection is the new connection we have set.

Click "Broadband Connection", enter the dial-up page, click on Broadband Connection, pop up three buttons, we click "Connection" on the line, you can delete it if you want, and then set up a new connection again.

Problem solving and steps:

Insert the network cable into the yellow socket (the round-ended socket is connected to the power supply).

2.At the bottom of the router there is a management page of this router, open 360 search search for this**, the first time you go in, you will be sure of your login password, you have set the login password, the second time you enter will be called as shown in the figure to ask you to enter the login password.

3.After entering, click on the Internet access settings at the bottom of the page, then click on the "Common Settings" Internet access method at the top, click on the broadband dial-up Internet access, and then enter the broadband and broadband password given to you by the operator, and finally click the save button below the broadband password.

4.If you want to use your mobile phone to connect to wireless WiFi, click on the wireless settings below, click the wireless status to "on", and then enter the wireless name and wireless password (this is not required, the name and password are entered by yourself). When you're done, turn on your phone's Wi-Fi to find the wireless name and enter the password.

Data Expansion: There is no strict definition of broadband. From a general point of view, it is the bandwidth that can meet the needs of various ** transmission on the network that people can feel, so it is also a dynamic and developing concept.

On January 7, 2015, the Federal Communications Commission (FCC) made its annual broadband progress report, in which the current chairman Tomwheeler said"Broadband"The original downlink speed of 4Mbps has been adjusted to 25Mbps, and the uplink speed of 1Mbps has been adjusted to 3Mbps. The new standard for broadband networks in the United States: 25Mbps downlink and 3Mbps uplink.

A router (also known as a pathfinder) is a computer network device that can send data to a destination by packaging a network (selecting the transmission path of data), a process called routing. A router is a device that connects two or more separate networks, and routing works at the third layer of the OSI model, the network layer.

A router is a device that connects various LANs and WANs on the Internet, and it will automatically select and set routes according to the situation of the channel, and send signals in the order of the best path. A router is the hub of the Internet"Traffic police"。At present, routers have been widely used in all walks of life, and various products of different grades have become the main force to realize the internal connection of various backbone networks, the interconnection between backbone networks, and the interconnection between backbone networks and the Internet.

Steps.

First, the connection method.

Routing modem --- router WAN port; The LAN port of the router --- a computer.

Steps. Second, the setting method.

Before setting, please disconnect the WAN port network cable of this router and plug it in after the setting is complete.

1. Set the IP range of the router.

In order to avoid conflicts, you can change the IP of the router to other IP segments in order to avoid conflicts (routing the LAN port of the cat). For example, it is modified to:

After restarting the router, the address to enter the router is.

2. Set up the router Internet access method.

View the IP details of the computers connected to the routing modem. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the router, and select [Static IP] in the [Setup Wizard]. Enter the same as the IP address of the routing modem, the others: mask, gateway, and DNS settings.

Restart the router after the setup is complete.

Turn on the router's wireless function].

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Select Wireless Settings --- Basic Settings.

3. Check [Turn on wireless function] and click Save.

Set wifi password].

1. Enter the router:

Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name, password, (the default is generally admin).

2. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

Broadband can be installed wireless router use, wireless router needs to be hardware installation and parameter setting, the installation and setting method of the router is relatively simple, the following takes the fast router as an example to introduce the installation and setting method, and the setting method of other brands of routers is similar.

2. Then open the browser and enter the management address and login password of the router.

5. After the wireless setup is completed, click Save, and then restart the router to use it normally.

Remove the original router and connect it directly to the WAN port of the wireless router in blue.

Then connect the computer network cable to the router and set the IP address to get it automatically.

Open the browser Enter to enter the router settings login screen Username admin Password admin

Then go to Settings Point to Network Parameters WAN Settings and select PPPoE Connection.

Fill in your broadband username and password.

Then go to Wireless Security, set up the wireless password, and you're done.

There are too many routers, it is easy to have network problems, and the network speed is relatively a little affected, so remove the original one as a backup.

What you mean is, how do you connect a wireless router from behind a router that has internet access.

For your reference:

Connection: (refer to the router manual).

It turns out that the network cable from the LAN of the router is plugged into the WAN end of the wireless router (no network cable is plugged in when set), and the network cable of all computers is plugged into the LAN end of the router.

Settings: (refer to the router manual).

1.Remember the original router LAN out of the network cable access method, fixed or automatic acquisition? How many IP addresses are fixed? Subnet mask? Gateway? dns?Use these parameters to set the WAN side of the router.

2.Configure the LAN side of the router: Enable DHCP service.

3.Set the WLAN side of the router: Set the password, which is generally safer to use WPA now. Remember the name of the outgoing signal from the wireless router, and the password for backup.

4.Check to see if the original router address is the same as your wireless router address, and if so, change your router address, for example, yours can be changed.

5.All computers plugged into the LAN port of the router have the NIC address set to automatically obtain.

All devices can share the Internet.

Thank you for your question.

For example, the original router IP at home has been set up, the network cable is connected, and the computer can access the Internet normally.

Connect the newly purchased wireless router with a computer alone, do not plug in other network cables, enter its settings page [LAN port settings], and modify the IP of the new router.

WAN Port Settings], select Dynamic IP.

Wireless parameters are customized. Save and restart your wireless router.

Then split a network cable from the wired router and connect it to the WAN port of the new router. Test wired and wireless Internet access.

You'll need to use it later to get into your own new router.

There is also a switch connection, which is also to enter the new router.

LAN port settings] Change the IP address to.

DHCP Server Settings] Disable the DHCP function.

Wireless parameters are customized.

After saving and restarting, connect the network cable split from the wired router to the LAN port of the new router, and the WAN port is empty.

Choose between two methods. Finally, the computer can be connected to any router wired or wirelessly, and the Internet can be accessed normally.

I don't want that one at home, and I directly replace it with a wireless router The connection method is the same as the original connection.

The two work together with Plug WAN Dynamic IP or Turn Off DHCP to LAN

Very simple! Extend a cable from the wired router that can access the Internet, then connect to the newly purchased wireless router WAN, and set the wireless router to dynamic mode and you can use it!

@ i--- computer (you can also connect a computer here) i** cable Fiber optic --- modean--- soho router --- wireless router --- computer.

Modem) i (dial-up) (gateway should be different from SOHO) i

i i --- mobile phone.

i--- wireless router --- computer.

Dial) ii--- mobile phone.

Configure the IP address of the wireless router to be different from the SOHO router, change the WAN of the wireless router to the IP of the LAN of the SOHO router (not the gateway), and then connect the WAN port of the wireless router to the LAN port of the SOHO router.

You see that there are several network cable sockets on the wireless router, and there is a WAN port on it, which can be understood as the ** of the network.

The other LAN cable jacks are connected to the computer.

The all-in-one machine has a wireless one, no need to connect the network cable, set the wireless password and the account password provided by the network provider.

Set up a router If you don't know how to speak, please ask.

Plug the power cord into the wireless router, connect the power supply, plug in the external network cable from the access entrance, open the computer and search on the line (if your all-in-one machine has a wireless network card), if not, connect a cable at one end and plug in the router at one end, and plug in the computer at the other end.

There is no picture, no truth, and it is difficult to judge.

As long as there is a network cable, you can install a wireless router without a computer, you plug the cable out of the optical modem into the WAN port of the router, and take a network cable and plug it into any interface of L1 L2 L3 L4, then connect it to the computer and then enter the router to set it up.

Whether it is a desktop computer, a laptop, or an all-in-one computer, the method of installing a wireless router is the same, and the specific operation method is:

1. Physically connect to the wireless router, as shown in the following figure:

3. Enter the username and password, the username and password used for the first time is abmin, which is subject to the manual, as shown in the following figure:

4. Enter the setup wizard and set the Internet mode, Internet account and password (the account and password are provided by the operator), as shown in the following figure

5. Change the ID (you can also use the default name as ID) and set the password. As shown below:

6. Click OK to complete the setting of the router, as shown in the following figure

7. Turn on the computer and click on the network mark on the taskbar, as shown below

8. Select your ID and enter your password, then click Connect.