Why can t the router be set up! What to do if the local connection is restricted

In this case, you need to find the problem first, and usually my solution is as follows:

1. Open the browser and enter the router address) to see if the router login box can pop up, if it can mean that your computer and the router connection is normal, in this case, you have to check the router configuration, such as whether the MAC address is bound, see if your address is in the column, and whether your IP is in the DHCP pool, usually the most convenient and fast way is to set up automatic acquisition, if your IP is not in the address pool, this situation will occur, Check whether the router is running properly.

2. If you can't log in to the router, it means that your computer is not connected to the router at all, at this time you need to check whether the line is working normally, and then follow step 1 after connecting to the router.

Set the IP address to be acquired automatically.

If it doesn't work, let's talk about it.

1. Open the start menu =》Connect to =》Show all connections 2. Right-click the local connection (the name may be different, it is the connection to the network, not the adapter) attributes, Internet t TPC click the "Properties" button below.

3. Modify the IP address, generally, the subnet mask will appear automatically. OK, OK4, if it still doesn't work, return to the interface just now, click the "Advanced" button, there is a default gateway at the bottom, select "Add", add the default gateway.

Here's how to set up the router:

1.Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.

2.Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the router settings page, the user name is admin, the password is blank, click to log in, and enter the router settings home page.

3.Once you're logged in to the home page, select Manual settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type.

In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly. The connection mode selection is always filled in with the mtu value of 1492. The save is done.

4.Wireless routers also have a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5 After the setting is completed, the router will automatically restart, and the external network cable can be connected to the WAN port of the router to use.

Restart the router and computer and set it up again according to the instructions (reboot, reboot from it, factory reset reboot).

This means that your computer network card does not get the correct IP address from the uplink device, which generally does not affect the Internet access. If you are a LAN user, please consult the administrator and set the IP address, if you are an ordinary broadband user, you can directly set a similar IP to the computer network card.

Set the router to pppoe connection, if the router is online, there will be no exclamation mark, maybe your router is not set up.

Set the router to PPPOE autodialing, and then it is best to set an IP address for the machine, and the subnet mask and gateway should be set accordingly.

If you are only connected to the network card in the home, your router DHCP may be turned off or DHCP distribution is not successful, ordinary home routers, after the route is set, learn the local IP to be set to automatic, if it must be set to fixed, it must be set according to the gateway of the router, for example: if the gateway is.

Your IP address needs to be set to this network segment.

Cause of limited or unconnected local connection on the computer: The computer's settings automatically acquire the IP, but the wireless router does not have DHCP enabled. If the router does not enable DHCP, the computer can only manually set the IP if it wants to access the Internet through the router.

However, manual settings are demanding on users and are not suitable for all network users, and the key is that improper settings will cause other network problems. Manual setting is not recommended. Refer to the following two items to reset the router:

1. The IP address of the router LAN port is set to the subnet mask. If so, there is no need to modify it. 2. Enable DHCP, set the gateway address to, set the DNS address to, set the IP address pool to, and set the computer to automatically obtain IP and DNS.

Thank you for the trouble to adopt!