How to connect your phone to a router to set up a wireless router

Now you can live without a computer at home, but you can't live without wifi. Because mobile phones must use wireless Internet access. But if you don't have a computer and need to set up a router, how do you set up a router on your phone? Today, we're going to talk about how to set up routing with your phone.

How to set up a router on your phone.

Step 1, take out our mobile phone to enter the WLAN option, scan, find your own wifi name, enter the password to connect, generally the default wifi name and password will be printed on the bottom of the router.

Step 3, click to enter, set the login password of the router, note: this is different from the login password above, what needs to be entered here is the administrator login password of the router, and the default settings can also be obtained at the bottom of the router or in the manual.

Step 4: Write the password provided by a broadband provider such as Netcom or Telecom.

Step 5, click the next step to enter the wireless setting, is to set the wireless wifi password, try to set the complex point (letter + number + symbol), set the point OK, exit.

Step 6, go back to the mobile phone, forget the original recorded wifi and scan the wifi again, find the signal connection of this router and enter the wifi password to surf the Internet.

How to set up a router on your phone.

Connect your phone to the router settings.

The password and username are generally admin

The steps to connect the router and set up the router on your phone are as follows:

1. First, connect the router and the broadband modem with a network cable, and the connection method is to connect the LAN port of the broadband modem with the WAN port of the router through the network cable.

2. After the hardware is connected, use the mobile phone to connect to the wireless signal of the router, then open the mobile phone browser, enter the login address and login password of the router, and select Quick Settings after logging in to the background.

3. Then fill in the broadband account number and password as required.

4. Then set the wireless name and password to save and then the router can be used normally.

First of all, the router must be passwordless, you can also have a password, but you must know the wireless password yourself, connect to wifi, enter the login IP of the router, enter the account password to log in to the background, there will generally be an option for quick settings, follow the steps to do. If the router cannot be found on the mobile phone, the wireless function of the mobile phone must be turned on first, and the router wireless also needs to be turned on first.

Connect your phone to the router settings.

To set up a router to access the Internet, here we take the TP-Link router operation as an example, and the operation is as follows:

1. Connect the router.

1. Connect the broadband cable of the front-end Internet to the WAN port of the router, and confirm that the indicator light of the corresponding interface is always on or flashing.

2. Log in to the management interface.

3. Enter your broadband account number and password.

4. Set the wireless name and password.

On the wireless settings page, you can modify the wireless name and wireless password of the signal respectively, as shown in the following figure

At this point, the router is set up, and the mobile phone searches for the newly set wireless signal name, enters the wireless password, and connects to the wireless signal to access the Internet. Other wireless terminals (mobile phones, pads, etc.) only need to connect to the wireless signal of the router to achieve Internet access; For other wired terminals (desktops, etc.), you only need to use a network cable to connect it to any free LAN port of the router to access the Internet; There's no need to set up a router anymore.

A wireless router can be set up on a mobile phone.

Is the cat connected to the wireless router, set it up according to the following method:

1. Plug in the wireless router, don't answer the cat first, and connect the mobile phone to the wireless router wireless network;

2. Enter the gateway address of the router (on the label behind the router) in the address bar of the browser, and enter the login username and password to enter the settings page;

3. Set up according to PPPoE (ADSL virtual dialing) mode, enter the Internet account and password;

4. Set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

When setting up the router for the first time, the phone must be connected to the router's default wifi network before you can set up the router after connecting.

1.When you first install and set up your router, you need to connect your router, optical modem broadband network cable, and computer first, and the correct connection method is as follows:

The WAN port on the router is connected to the optical modem. If the modem is not used for broadband, connect the broadband network cable and wall network port to the WAN port of the router. If you have a computer that needs to access the Internet, connect it to the LAN port of the router with a network cable.

Question: I am the main router can access the Internet, and I am connected by a cable from the router, but I can't access the Internet from the router.

The primary router is wire-connected to the slave router.

I hope my answer can help you, it is inevitable that there will be shortcomings, I hope you can put it forward, let me continue to improve, and constantly improve the quality of service Finally, you can give a thumbs up, dear

I can set it with a cell.

Router to wireless router, second router setup, there are two ways (provided that the first router has been set up):

The first method: dynamic IP mode (the first route is the primary route, and the second route is the slave route).

1. Plug in the router and do not connect the LAN port of the main router first, and reset the slave router (restore the factory);

2. Connect the mobile phone to the wireless network from the router and enter the settings page;

3. Follow dynamic i

p mode setting;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, put the main route to LAN

The network cable that comes out of the port is connected to the WAN port from the router.

The second method: wireless AP mode.

1. Don't connect the main router from the router, connect the phone to the wireless network from the router, and change the IP address of the router router. For example, most router addresses are, we just need to change from router IP address to that;

2. Turn off the DHCP function from the router in the settings;

3. Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

The main router is connected to the network cable interface and let it be able to access the Internet.

The secondary router is used as a bridge, and only needs to be plugged in and placed between the main router and the Internet device.

Connect to the network of your secondary router, open the browser, enter, the account and password are admin, and log in.

Enter the settings interface of the secondary router, select the WDS bridge, a lot of networks will be flashed, select the network of your main router, and then enter the password, note that an address will appear at this time, and you can only enter the settings interface of the secondary router through this address in the future, otherwise you can only reset.

Also, note that your secondary route is best placed between your primary route and your Internet device, close to the midpoint.

After the bridge is successful, the network of the secondary router will become the same name as the main router, and the password is the same, at this time, you need to unplug the power of the main router, wait for a minute or two and then connect it, and then connect to the secondary router to access the Internet.

If the distance between the main router and the Internet device is too far, the network speed will slow down or be unstable, if you can ensure that your secondary router is within the full signal coverage of the main router, and your Internet equipment is also within the full signal coverage of the secondary router, it will be more stable and easy to use.

Connect your phone to the router settings.

With a toothpick, find the small hole marked RESET on the router, plug it in, and the router will return to its factory state.

Plug the broadband network cable into the WAN interface of the router, connect the computer to the LAN interface of the router with the network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Go to the "WAN" setting

A If your broadband requires an account password, set up PPPoE, fill in the account password, select Automatic connection as the connection mode, and confirm.

b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address and fill in the correct address of the fixed IP address, mask, gateway, and DNS.

c If you don't need the account password and it is a dynamic IP address, please select a dynamic IP address and fill in the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings and activate the DHCP server.

5. Connect the broadband network cable to the "WAN" port of the router.

6. Connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

Try it, computers and mobile phones should be able to access the Internet.

At present, some new models of relatively new ordinary wireless routers generally support the use of smartphones for settings, while smart routers basically support all of them.

Step 1: First open the wireless network settings in the mobile phone, if it is a new router, generally turn on the power, the router will automatically create an initialized wireless network, choose to connect directly, no need to care whether there is a network.

Step 2: Open the mobile phone browser, enter the login address of different brands of routers in the address bar, you can see the nameplate on the router body) and then open, and then a login interface will pop up. Enter the default initial username and password of the router here, and the general initial password is:

admin, the account name is also: admin, some do not use a password, you need to create one for the first setup.

Step 3: After logging in to the router settings interface, the setting method is the same as that in the computer. Find the router setup wizard first and follow the prompts to proceed to the next step.

In this case, set up the router, open the browser in the mobile phone, enter the IP address in the address bar of the browser, log in the password, enter the broadband account password, click on the wireless settings, set the account and password to save and you can connect to the router.

The mobile phone directly logs in to this page of the router,Its background is a**There is a side in the login,Then connect it,The general manual can be seen。

The mobile phone is connected to the default wifi of the router, enter the gateway address of the terminal in the browser address bar, and press enter to log in to enter the management interface of the router.

The mobile phone is connected to the router wireless network, then open the mobile phone browser, enter the management IP address of the router, and then enter the user name and password, and enter the router configuration page to modify the router information.

You can enter the address of the router in the browser of your phone, and you can set up a wireless router after entering.

You can directly log in to the router's **, and you can directly control the router to change settings.

1. Configure the wireless router first (take the Leike router as an example) 1. One end of the network cable is connected to the WAN port of the router, and the other end is connected to the LAN port of the wireless cat.

3. Select PPPoE and enter the broadband account number and password.

Wireless Name: Enter a wireless device name.

Wireless Encryption Status: Select the encryption type, such as Encryption, enter the wireless password, and click the Save to take effect button.

Second, the mobile phone is connected to the wireless router

1. Swipe down to open the notification area, turn on Wi-Fi, and tap the settings icon in the upper right corner.

2. Click WLAN, select the corresponding SSID wireless device name, enter the WiFi password, and click Connect.

It's the same as setting up your computer!

Use MAC filtering on your router to add your phone's MAC address to the allowlist, so that other devices that don't have it on the list won't be able to connect to the router.