The router has been set up for automatic dialing, the local connection is also available, and the br

There are a few components connected that you didn't say clearly.。。 Only routers are not possible.

Set up autodialing must be with the password, and you say you don't know and the password. How is the autodial set up successfully?

If you mean, you set up autodialing before, and now you forgot the password. Then your password should still be stored in the router, just enter the router, find the location of the display and password, and use the asterisk password viewer to see the password.

If it is a router + bridge modem: ** wire to the cat, the cat to the router, and the router to the computer. The cat does not need to be set up, and the auto-dialing is set up in the router, and you have to fill in your password. Broadband and passwords to ask telecommunications to.

If it is a cat with a direct routing function: directly connect the cat to the computer, and then log in with a super account to set up automatic dialing.

With router dial-up, there is no need to establish a broadband connection to dial-up, and you can access the Internet directly from the router to the computer.

If you can't access the Internet from the LAN port of the router to your computer, then it is likely that the IP address is not set, you check your IP address, you can see it in the local connection, check whether it is the same network segment as the router, for example, the address of your router is, then your IP should be, and your DNS is not set, check, there is still a problem and then hi me

If you have a router that doesn't use a broadband connection, you just need to plug in the network cable.

Router to set up automatic broadband dialing method Chun Chong Bu:

1. Connect the router to the network: connect the network cable to the WAN port of the router and connect the computer with any LAN port of the router with the network cable. When the LAN port flashes when the computer is turned on, it means that the computer has successfully established communication with the router.

2. The system is connected to the router: turn on the wifi of the computer, search for the default wifi name of the router, and the nameplate on the back of the router is written, and connect to the wifi network; The first time you use the router, you generally don't need to enter the wifi password;

3. Enter the gateway interface: open the computer browser, enter the gateway IP address of the nameplate behind the router, generally, enter the gateway configuration interface, and the new route will automatically pop up this interface;

4. Go to the WAN port in the advanced settings to set the connection mode, and select Auto Connect to set up auto-dialing. Sentenced to burial.

The router does not need to be automatically dialed every day, and the specific setting method is as follows:

1. Open the browser, open the wireless network settings interface, enter the administrator password, and log in.

2. After logging in, click on the Setup Wizard option on the left.

3. In the settings interface, select PPPoE (ADSL Virtual Dialing).

4. Enter the account password of the broadband.

5. Set the name and password of the wireless network.

6. After that, the setup can be completed.

According to your current situation, you still haven't set up the automatic connection function, the account number and password are entered into the router, and the router dials by itself, so you don't need to manually connect the broadband. You need to enter the router**, enter the account number and password, save and log out. As long as your computer is connected to the router, you can access the Internet, just plug it in.

Remember to set the IP address to automatically acquire in the local connection. That's the general situation.,I hope it helps.,If you have a problem, you can hi me.。

Addendum: That's what it means: After the router is set up, the network cable from the router is connected to the computer. No more manual dialing.

Once the router is set up to automatically dial numbers, the computer no longer needs to have a broadband connection: it can only be dialed on the computer or router.

Set Router Dialing Method:

Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

You can delete the broadband connection, change the local connection to automatically obtain the IP, and the steps are the attributes of the online neighbors--- --- the protocol --- automatically obtain the IP, and the --- OK is OK.

If you connect through routing, you can't make a dial-up connection, you can connect automatically through the routing settings.

Just delete the broadband connection.

Wireless router set broadband automatic dial-up Internet access method:

1.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

2.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings.

If the broadband service needs to be dialed, please select the PPPoE dial-up mode, enter the broadband account password for PPPoE dial-up, and select Auto-connect in the connection mode.

This can be done by following these steps:

Step 2: On the pop-up login page, enter the router username and password (you can view the nameplate at the bottom of the router).

Step 3: Then fill in the broadband username and password you are using and save it.

Step 4: Connect via router dial-up.

First of all, you need to know the management address of the wireless router, usually or yes, enter the corresponding management address, enter the default login username and password of the router, find the network parameters and click on, select PPPoe for WAN port settings, enter the broadband user name and password you use, and operate according to the manual.